This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ASKSH, This is a computer-generated error report created automatically by CPANPLUS, version 0.79_02. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed May 9 14:46:49 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASKSH/Data-RefQueue-0.3.tar.gz' [MSG] [Wed May 9 14:46:50 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASKSH/CHECKSUMS' [MSG] [Wed May 9 14:46:50 2007] Checksum matches for 'Data-RefQueue-0.3.tar.gz' [MSG] [Wed May 9 14:46:50 2007] Extracted 'Data-RefQueue-0.3/' [MSG] [Wed May 9 14:46:50 2007] Extracted 'Data-RefQueue-0.3/Build.PL' [MSG] [Wed May 9 14:46:50 2007] Extracted 'Data-RefQueue-0.3/Changes' [MSG] [Wed May 9 14:46:50 2007] Extracted 'Data-RefQueue-0.3/examples/' [MSG] [Wed May 9 14:46:50 2007] Extracted 'Data-RefQueue-0.3/examples/example.pl' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/lib/' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/lib/Data/' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/lib/Data/RefQueue.pm' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/LICENSE' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/Makefile.PL' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/MANIFEST' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/META.yml' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/README' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/t/' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/t/00-pod_coverage.t.disabled' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/t/00-POD_valid.t' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data-RefQueue-0.3/t/01-refqueue.t' [MSG] [Wed May 9 14:46:51 2007] Extracted 'Data::RefQueue' to '/home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3' [MSG] [Wed May 9 14:46:52 2007] Checking if your kit is complete... Looks good Writing Makefile for Data::RefQueue [MSG] [Wed May 9 14:46:52 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed May 9 14:46:54 2007] cp lib/Data/RefQueue.pm blib/lib/Data/RefQueue.pm Manifying blib/man3/Data::RefQueue.3 [ERROR] [Wed May 9 14:46:55 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/blead/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-POD_valid....skipped all skipped: Test::Pod 1.00 required for testing POD t/01-refqueue..... # Failed test 'use Data::Refqueue;' # at t/01-refqueue.t line 10. # Tried to use 'Data::Refqueue'. # Error: Can't locate Data/Refqueue.pm in @INC (@INC contains: /home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3/blib/lib /home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3/blib/arch /home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3/blib /home/chris/blead/lib/perl5/5.9.5/alpha-linux-thread-multi /home/chris/blead/lib/perl5/5.9.5/alpha-linux-thread-multi /home/chris/blead/lib/perl5/5.9.5 /home/chris/blead/lib/perl5/site_perl/5.9.5/alpha-linux-thread-multi /home/chris/blead/lib/perl5/site_perl/5.9.5/alpha-linux-thread-multi /home/chris/blead/lib/perl5/site_perl/5.9.5 . /home/chris/blead/lib/perl5/5.9.5/alpha-linux-thread-multi /home/chris/blead/lib/perl5/5.9.5 /home/chris/blead/lib/perl5/site_perl/5.9.5/alpha-linux-thread-multi /home/chris/blead/lib/perl5/site_perl/5.9.5 .) at (eval 3) line 2. # BEGIN failed--compilation aborted at t/01-refqueue.t line 10. Can't locate object method "new" via package "Data::RefQueue" (perhaps you forgot to load "Data::RefQueue"?) at t/01-refqueue.t line 11. # Looks like you planned 3 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-3 Failed 3/3 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01-refqueue.t 255 65280 3 5 1-3 1 test skipped. Failed 1/2 test scripts. 3/3 subtests failed. Files=2, Tests=3, 1 wallclock secs ( 0.29 cusr + 0.04 csys = 0.34 CPU) Failed 1/2 test programs. 3/3 subtests failed. MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Data::Refqueue As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'ASKSH ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Data::Refqueue' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/alpha-unknown-linux-gnu/gcc-bin/3.4.6 PERL5LIB = :/home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3/blib/lib:/home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3/blib/arch:/home/chris/blead/.cpanplus/5.9.5/build/Data-RefQueue-0.3/blib PERL5_CPANPLUS_IS_RUNNING = 12461 PERL5_CPANPLUS_IS_VERSION = 0.79_02 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/blead/bin/perl5.9.5 UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 10 100 1000 EGID: $) = 1000 10 100 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5 patch 31175) configuration: Platform: osname=linux, osvers=2.6.16.19, archname=alpha-linux-thread-multi uname='linux alpha 2.6.16.19 #1 sat apr 14 14:47:44 bst 2007 alpha ev6 tsunami gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/include/gdbm' ccversion='', gccversion='3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.10)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
