This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Philip M. Gollucci, This is a computer-generated test report for Apache-Test-1.29, created automatically by CPAN::Reporter, version 0.43, and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. Congratulations! All tests were successful. Sections of this report: * Tester comments * Prerequisites * Environment and other context * Test output ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------- ---- ---- Cwd 2.06 3.24 File::Spec 0.8 3.24 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = en_US.UTF-8 LANGUAGE = en PATH = /home/khisanth/perl588/bin:~/util:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 1 PERL5_CPAN_IS_RUNNING = 1 SHELL = /bin/bash TERM = xterm Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/khisanth/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 1000 112 106 105 104 46 44 30 29 25 24 20 4 EGID: $) = 1000 1000 112 106 105 104 46 44 30 29 25 24 20 4 Perl module toolchain versions installed: Module Have ------------------- ------ CPAN 1.9102 Cwd 3.24 ExtUtils::CBuilder 0.18 ExtUtils::Command 1.13 ExtUtils::Install 1.41 ExtUtils::MakeMaker 6.32 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.24 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 2.64 Test::More 0.70 version 0.7203 ------------------------------ TEST OUTPUT ------------------------------ Output from '/usr/bin/make test': /home/khisanth/perl588/bin/perl -Iblib/arch -Iblib/lib \ t/TEST -clean [warning] setting ulimit to allow core files ulimit -c unlimited; /home/khisanth/perl588/bin/perl /home/khisanth/.cpan/build/Apache-Test-1.29-jgYkeR/t/TEST -clean APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT= APACHE_TEST_USER= APACHE_TEST_APXS= \ /home/khisanth/perl588/bin/perl -Iblib/arch -Iblib/lib \ t/TEST -bugreport -verbose=0 [warning] setting ulimit to allow core files ulimit -c unlimited; /home/khisanth/perl588/bin/perl /home/khisanth/.cpan/build/Apache-Test-1.29-jgYkeR/t/TEST -bugreport -verbose=0 We are now going to configure the Apache-Test framework. This configuration process needs to be done only once. First we need to know where the 'httpd' executable is located. If you have more than one Apache server is installed, make sure you supply the path to the one you are going to use for testing. You can always override this setting at run time via the '-httpd' option. For example: % t/TEST -httpd /path/to/alternative/httpd or via the environment variable APACHE_TEST_HTTPD. For example: % APACHE_TEST_HTTPD=/path/to/alternative/httpd t/TEST If for some reason you want to skip the test suite, type: skip Please provide a full path to 'httpd' executable: [] Next we need to know where the 'apxs' script is located. This script provides a lot of information about the apache installation, and makes it easier to find things. However it's not available on all platforms, therefore it's optional. If you don't have it installed it's not a problem. Just press Enter. Notice that if you have Apache 2.x installed that script could be called as 'apxs2'. If you have more than one Apache server is installed, make sure you supply the path to the apxs script you are going to use for testing. You can always override this setting at run time via the '-apxs' option. For example: % t/TEST -apxs /path/to/alternative/apxs or via the environment variable APACHE_TEST_APXS. For example: % APACHE_TEST_APXS=/path/to/alternative/apxs t/TEST Please provide a full path to (optional) 'apxs' executable: [] [warning] running with new config opts: /home/khisanth/perl588/bin/perl /home/khisanth/.cpan/build/Apache-Test-1.29-jgYkeR/t/TEST -bugreport -verbose=0 -httpd /usr/sbin/apache2 -apxs /usr/bin/apxs2 /usr/sbin/apache2 -d /home/khisanth/.cpan/build/Apache-Test-1.29-jgYkeR/t -f /home/khisanth/.cpan/build/Apache-Test-1.29-jgYkeR/t/conf/httpd.conf -D APACHE2 using Apache/2.0.55 (worker MPM) waiting 60 seconds for server to start: . waiting 60 seconds for server to start: ok (waited 0 secs) server localhost.localdomain:8529 started t/bad_coding.............ok t/cookies................skipped all skipped: cannot find one of cgi or cgid t/next_available_port....skipped all skipped: cannot find one of cgi or cgid t/ping...................ok t/redirect...............ok t/request................ok All tests successful, 2 tests skipped. Files=6, Tests=19, 11 wallclock secs ( 7.62 cusr + 0.68 csys = 8.30 CPU) [warning] server localhost.localdomain:8529 shutdown -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.12-10-686, archname=i686-linux-multi uname='linux miyu 2.6.12-10-686 #1 mon jan 16 17:58:04 utc 2006 i686 gnulinux ' config_args='' hint=previous, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64' ccversion='', gccversion='4.0.3 (Ubuntu 4.0.3-1ubuntu5)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/usr/lib/libc.a, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/home/khisanth/perl588/lib/5.8.8/i686-linux-multi/CORE' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
