This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MTHURN, This is a computer-generated error report created automatically by CPANPLUS, version 0.78. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri May 11 17:17:01 2007] Trying to get 'http://www.cpan.org/authors/id/M/MT/MTHURN/Devel-Fail-MakeTest-1.007.tar.gz' [MSG] [Fri May 11 17:17:03 2007] Trying to get 'http://www.cpan.org/authors/id/M/MT/MTHURN/CHECKSUMS' [MSG] [Fri May 11 17:17:03 2007] Checksum matches for 'Devel-Fail-MakeTest-1.007.tar.gz' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/Changes' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/Base.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/Can.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/Fetch.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/Makefile.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/Metadata.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/Win32.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install/WriteAll.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/inc/Module/Install.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/lib/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/lib/Devel/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/lib/Devel/Fail/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/lib/Devel/Fail/MakeTest.pm' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/Makefile.PL' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/MANIFEST' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/META.yml' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/README' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/t/' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/t/fail.t' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/t/pod-coverage.t' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel-Fail-MakeTest-1.007/t/pod.t' [MSG] [Fri May 11 17:17:04 2007] Extracted 'Devel::Fail::MakeTest' to '/home/chris/.cpanplus/5.8.8/build/Devel-Fail-MakeTest-1.007' [MSG] [Fri May 11 17:17:05 2007] Checking if your kit is complete... Looks good Writing Makefile for Devel::Fail::MakeTest [MSG] [Fri May 11 17:17:05 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri May 11 17:17:06 2007] make_all_was_successful. [ERROR] [Fri May 11 17:17:06 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/fail............ # Failed test at t/fail.t line 2. # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.00 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.00 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/fail.t 1 256 1 1 1 2 tests skipped. Failed 1/3 test scripts. 1/1 subtests failed. Files=3, Tests=1, 0 wallclock secs ( 0.40 cusr + 0.06 csys = 0.45 CPU) Failed 1/3 test programs. 1/1 subtests failed. make: *** [test_dynamic] Error 255 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/alpha-unknown-linux-gnu/gcc-bin/3.4.6 PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Devel-Fail-MakeTest-1.007/blib/lib:/home/chris/.cpanplus/5.8.8/build/Devel-Fail-MakeTest-1.007/blib/arch:/home/chris/.cpanplus/5.8.8/build/Devel-Fail-MakeTest-1.007/blib PERL5_CPANPLUS_IS_RUNNING = 16317 PERL5_CPANPLUS_IS_VERSION = 0.78 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 1000 100 10 EGID: $) = 1000 1000 100 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.19, archname=alpha-linux-thread-multi uname='linux alpha 2.6.16.19 #1 sat apr 14 14:47:44 bst 2007 alpha ev6 gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/include/gdbm' ccversion='', gccversion='3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='long double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/home/chris/perl588/lib/5.8.8/alpha-linux-thread-multi/CORE' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
