This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KAZUHO, This is a computer-generated error report created automatically by CPANPLUS, version 0.78. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat May 12 00:21:19 2007] Trying to get 'http://www.cpan.org/authors/id/K/KA/KAZUHO/Cache-Adaptive-0.02.tar.gz' [MSG] [Sat May 12 00:21:20 2007] Trying to get 'http://www.cpan.org/authors/id/K/KA/KAZUHO/CHECKSUMS' [MSG] [Sat May 12 00:21:21 2007] Checksum matches for 'Cache-Adaptive-0.02.tar.gz' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/lib' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/MANIFEST' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/t' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/Changes' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/README' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/Makefile.PL' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/META.yml' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/t/cache-adaptive.t' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/lib/Cache' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache-Adaptive-0.02/lib/Cache/Adaptive.pm' [MSG] [Sat May 12 00:21:21 2007] Extracted 'Cache::Adaptive' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02' [MSG] [Sat May 12 00:21:23 2007] Checking if your kit is complete... Looks good Writing Makefile for Cache::Adaptive [MSG] [Sat May 12 00:21:23 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat May 12 00:21:26 2007] cp lib/Cache/Adaptive.pm blib/lib/Cache/Adaptive.pm Manifying blib/man3/Cache::Adaptive.3 [ERROR] [Sat May 12 00:21:27 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/cache-adaptive....Can't locate Cache/MemoryCache.pm in @INC (@INC contains: /export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02/blib /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl . /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl .) at t/cache-adaptive.t line 7. BEGIN failed--compilation aborted at t/cache-adaptive.t line 7. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-17 Failed 17/17 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/cache-adaptive.t 255 65280 17 34 1-17 Failed 1/1 test scripts. 17/17 subtests failed. Files=1, Tests=17, 0 wallclock secs ( 0.10 cusr + 0.08 csys = 0.18 CPU) Failed 1/1 test programs. 17/17 subtests failed. *** Error code 255 make: Fatal error: Command failed for target `test_dynamic' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Cache::MemoryCache As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KAZUHO ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Cache::MemoryCache' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Cache-Adaptive-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 16149 PERL5_CPANPLUS_IS_VERSION = 0.78 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
