This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Daniel Ambar, This is a computer-generated test report for Catalyst-Plugin-Imager-0.01, created automatically by CPAN::Reporter, version 0.43, and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, attempting to test your distribution gave an inconclusive result. This could be because you did not define tests (or tests could not be found), because your tests were interrupted before they finished, or because the results of the tests could not be parsed by CPAN::Reporter. Sections of this report: * Tester comments * Prerequisites * Environment and other context * Test output ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/lib/ccache:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = /home/sand/.cpan/build/Catalyst-Model-DBIC-Schema-0.18-M12bIX/blib/arch:/home/sand/.cpan/build/Catalyst-Model-DBIC-Schema-0.18-M12bIX/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-StackTrace-0.06-G2gT9y/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-StackTrace-0.06-G2gT9y/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-Authentication-Store-DBIC-0.07-UXEgVG/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-Authentication-Store-DBIC-0.07-UXEgVG/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-Session-State-Cookie-0.07-xCdhQv/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-Session-State-Cookie-0.07-xCdhQv/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-Session-Store-FastMmap-0.02-rtN76E/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-Session-Store-FastMmap-0.02-rtN76E/blib/lib:/home/sand/.cpan/build/Catalyst-Devel-1.02-ykTfBe/blib/arch:/home/sand/.cpan/build/Catalyst-Devel-1.02-ykTfBe/blib/lib:/home/sand/.cpan/build/Module-Install-0.67-NZb8Mq/blib/arch:/home/! sand/.cpan/build/Module-Install-0.67-NZb8Mq/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-Static-Simple-0.17-fXVX8s/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-Static-Simple-0.17-fXVX8s/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-Authorization-ACL-0.08-YeJkW6/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-Authorization-ACL-0.08-YeJkW6/blib/lib:/home/sand/.cpan/build/Catalyst-Plugin-ConfigLoader-0.14-OOhUcR/blib/arch:/home/sand/.cpan/build/Catalyst-Plugin-ConfigLoader-0.14-OOhUcR/blib/lib PERL5_CPANPLUS_IS_RUNNING = 1 PERL5_CPAN_IS_RUNNING = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pyVlEUy/[EMAIL PROTECTED]/bin/perl UID: $< = 1005 EUID: $> = 1005 GID: $( = 1005 1005 EGID: $) = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------ CPAN 1.9101 Cwd 3.24 ExtUtils::CBuilder 0.18 ExtUtils::Command 1.13 ExtUtils::Install 1.41 ExtUtils::MakeMaker 6.32 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.24 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 2.64 Test::More 0.70 version 0.7203 ------------------------------ TEST OUTPUT ------------------------------ Output from '/usr/bin/make test': make: Warning: File `Imager.pm' has modification time 2.9e+03 s in the future Skip blib/lib/Imager.pm (unchanged) No tests defined for Catalyst extension. make: warning: Clock skew detected. Your build may be incomplete. -- Summary of my perl5 (revision 5 version 8 subversion 8 patch 30961) configuration: Platform: osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-64int uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pyVlEUy/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -des -Duse64bitint -Dusedevel' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -g -L/usr/local/lib'
