This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear PERIGRIN, This is a computer-generated error report created automatically by CPANPLUS, version 0.78. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri May 18 15:55:06 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PERIGRIN/Acme-Dahut-Call-0.01.tar.gz' [MSG] [Fri May 18 15:55:07 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PERIGRIN/CHECKSUMS' [MSG] [Fri May 18 15:55:08 2007] Checksum matches for 'Acme-Dahut-Call-0.01.tar.gz' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/.cvsignore' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/Build.PL' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/Changes' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/Base.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/Makefile.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/MakeMaker.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/Metadata.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/lib/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/Call/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/Call/Identifier.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/Call.pm' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/Makefile.PL' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/MANIFEST' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/META.yml' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/README' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/t/' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/t/00.load.t' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/t/kwalitee.t' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/t/perlcritic.t' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/t/pod-coverage.t' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme-Dahut-Call-0.01/t/pod.t' [MSG] [Fri May 18 15:55:09 2007] Extracted 'Acme::Dahut::Call' to '/home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01' [MSG] [Fri May 18 15:55:12 2007] Checking if your kit is complete... Looks good Writing Makefile for Acme::Dahut::Call [MSG] [Fri May 18 15:55:12 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri May 18 15:55:15 2007] cp lib/Acme/Dahut/Call/Identifier.pm blib/lib/Acme/Dahut/Call/Identifier.pm cp lib/Acme/Dahut/Call.pm blib/lib/Acme/Dahut/Call.pm Manifying blib/man3/Acme::Dahut::Call::Identifier.3 Manifying blib/man3/Acme::Dahut::Call.3 [ERROR] [Fri May 18 15:55:18 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/00.load......... # Failed test 'use Acme::Dahut::Call;' # at t/00.load.t line 4. # Tried to use 'Acme::Dahut::Call'. # Error: Can't locate Moose.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/inc /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/arch /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib/Acme/Dahut/Call.pm line 3. # BEGIN failed--compilation aborted at t/00.load.t line 4. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value in concatenation (.) or string at t/00.load.t line 7. # Testing Acme::Dahut::Call # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/kwalitee........skipped all skipped: Test::Kwalitee not installed; skipping t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/inc /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/arch /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at t/perlcritic.t line 3. dubious Test returned status 2 (wstat 512, 0x200) t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00.load.t 1 256 1 1 1 t/perlcritic.t 2 512 ?? ?? ?? 3 tests skipped. Failed 2/5 test scripts. 1/1 subtests failed. Files=5, Tests=1, 2 wallclock secs ( 0.44 cusr + 0.92 csys = 1.36 CPU) Failed 2/5 test programs. 1/1 subtests failed. *** Error code 35 Stop in /home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01 (line 754 of Makefile). MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Moose Test::Perl::Critic As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'PERIGRIN ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Moose' => '0', # or a minimum working version 'Test::Perl::Critic' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Test::More 0.70 0 version 0.7203 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib:/home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/arch:/home/chris/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 14483 PERL5_CPANPLUS_IS_VERSION = 0.78 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 0 10 EGID: $) = 10 0 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
