This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear FOOLFISH, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Jun 18 11:03:42 2007] Trying to get 'http://www.cpan.org/authors/id/F/FO/FOOLFISH/EasyTool-1.0.7.tar.gz' [MSG] [Mon Jun 18 11:03:43 2007] Trying to get 'http://www.cpan.org/authors/id/F/FO/FOOLFISH/CHECKSUMS' [MSG] [Mon Jun 18 11:03:43 2007] Checksum matches for 'EasyTool-1.0.7.tar.gz' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/META.yml' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/Makefile.PL' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/CHANGES' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/MANIFEST' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/EasyTool.pm' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/t/' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/t/EasyTool.t' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/LICENSE' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/README' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool-1.0.7/INSTALL' [MSG] [Mon Jun 18 11:03:44 2007] Extracted 'EasyTool' to '/home/chris/.cpanplus/5.8.8/build/EasyTool-1.0.7' [MSG] [Mon Jun 18 11:03:45 2007] Checking if your kit is complete... Looks good Writing Makefile for EasyTool [MSG] [Mon Jun 18 11:03:45 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Jun 18 11:03:47 2007] cp EasyTool.pm blib/lib/EasyTool.pm Manifying blib/man3/EasyTool.3 [ERROR] [Mon Jun 18 11:03:48 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/EasyTool....# Failed test 168 in t/EasyTool.t at line 483 # t/EasyTool.t line 483 is: Test::ok($false); # Failed test 169 in t/EasyTool.t at line 483 fail #2 # Failed test 172 in t/EasyTool.t at line 483 fail #3 # Failed test 176 in t/EasyTool.t at line 483 fail #4 # Failed test 180 in t/EasyTool.t at line 483 fail #5 # Failed test 203 in t/EasyTool.t at line 483 fail #6 FAILED tests 168-169, 172, 176, 180, 203 Failed 6/216 tests, 97.22% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/EasyTool.t 216 6 168-169 172 176 180 203 Failed 1/1 test scripts. 6/216 subtests failed. Files=1, Tests=216, 1 wallclock secs ( 0.45 cusr + 0.04 csys = 0.49 CPU) Failed 1/1 test programs. 6/216 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Mon Jun 18 11:03:48 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Digest::MD5 2.36 0 FileHandle 2.01 0 MIME::Base64 3.07 0 MIME::QuotedPrint 3.07 0 Time::Local 1.17 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/alpha-unknown-linux-gnu/gcc-bin/3.4.6 PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/EasyTool-1.0.7/blib/lib:/home/chris/.cpanplus/5.8.8/build/EasyTool-1.0.7/blib/arch:/home/chris/.cpanplus/5.8.8/build/EasyTool-1.0.7/blib PERL5_CPANPLUS_IS_RUNNING = 28780 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 1000 100 10 EGID: $) = 1000 1000 100 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.19, archname=alpha-linux-thread-multi uname='linux alpha 2.6.16.19 #1 sat apr 14 14:47:44 bst 2007 alpha ev6 tsunami gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/include/gdbm' ccversion='', gccversion='3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.10)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='long double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
