This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear PEVANS,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.78. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Jun 18 22:22:39 2007] Trying to get 
'http://www.cpan.org/authors/id/P/PE/PEVANS/Time-HiRes-Value-0.05.tar.gz'
[MSG] [Mon Jun 18 22:22:40 2007] Trying to get 
'http://www.cpan.org/authors/id/P/PE/PEVANS/CHECKSUMS'
[MSG] [Mon Jun 18 22:22:42 2007] Checksum matches for 
'Time-HiRes-Value-0.05.tar.gz'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/MANIFEST'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/t/'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/t/02timing.t'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/t/01test.t'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/META.yml'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/lib/'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/lib/Time/'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 
'Time-HiRes-Value-0.05/lib/Time/HiRes/'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 
'Time-HiRes-Value-0.05/lib/Time/HiRes/Value.pm'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/Makefile.PL'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time-HiRes-Value-0.05/Build.PL'
[MSG] [Mon Jun 18 22:22:42 2007] Extracted 'Time::HiRes::Value' to 
'/opt/perl/testers/.cpanplus/5.8.8/build/Time-HiRes-Value-0.05'
[MSG] [Mon Jun 18 22:22:43 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Test::Exception 0 not found.
Writing Makefile for Time::HiRes::Value

[MSG] [Mon Jun 18 22:22:43 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Jun 18 22:22:43 2007] Module 'Time::HiRes::Value' requires 
'Test::Exception' version '0' to be installed 
[MSG] [Mon Jun 18 22:22:43 2007] Trying to get 
'http://www.cpan.org/authors/id/A/AD/ADIE/Test-Exception-0.25.tar.gz'
[MSG] [Mon Jun 18 22:22:44 2007] Trying to get 
'http://www.cpan.org/authors/id/A/AD/ADIE/CHECKSUMS'
[MSG] [Mon Jun 18 22:22:45 2007] Checksum matches for 
'Test-Exception-0.25.tar.gz'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/Build.PL'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/Changes'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/lib/'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/lib/Test/'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 
'Test-Exception-0.25/lib/Test/Exception.pm'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/Makefile.PL'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/MANIFEST'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/META.yml'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/README'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/t/'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/t/caller.t'
[MSG] [Mon Jun 18 22:22:45 2007] Extracted 'Test-Exception-0.25/t/developer/'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 
'Test-Exception-0.25/t/developer/documented.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 
'Test-Exception-0.25/t/developer/perlcritic.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 
'Test-Exception-0.25/t/developer/perlcriticrc'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 
'Test-Exception-0.25/t/developer/pod.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 
'Test-Exception-0.25/t/developer/spelling.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/Exception.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/import.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/isa.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/lives_and.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/preserve.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/return.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/rt.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/stacktrace.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test-Exception-0.25/t/throws_ok.t'
[MSG] [Mon Jun 18 22:22:46 2007] Extracted 'Test::Exception' to 
'/opt/perl/testers/.cpanplus/5.8.8/build/Test-Exception-0.25'
[MSG] [Mon Jun 18 22:22:47 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Sub::Uplevel 0.13 not found.
Writing Makefile for Test::Exception

[MSG] [Mon Jun 18 22:22:47 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Jun 18 22:22:47 2007] Module 'Test::Exception' requires 
'Sub::Uplevel' version '0.13' to be installed 
[MSG] [Mon Jun 18 22:22:47 2007] Trying to get 
'http://www.cpan.org/authors/id/D/DA/DAGOLDEN/Sub-Uplevel-0.14.tar.gz'
[MSG] [Mon Jun 18 22:22:48 2007] Trying to get 
'http://www.cpan.org/authors/id/D/DA/DAGOLDEN/CHECKSUMS'
[MSG] [Mon Jun 18 22:22:50 2007] Checksum matches for 'Sub-Uplevel-0.14.tar.gz'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/t/'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/t/01_die_check.t'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/t/98_pod.t'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/t/lib/'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/t/lib/Foo.pm'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 
'Sub-Uplevel-0.14/t/99_pod_coverage.t'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/t/02_uplevel.t'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 
'Sub-Uplevel-0.14/t/03_nested_uplevels.t'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/examples/'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 
'Sub-Uplevel-0.14/examples/uplevel-demo.pl'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/META.yml'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/Changes'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/MANIFEST'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/lib/'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/lib/Sub/'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/lib/Sub/Uplevel.pm'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/MANIFEST.SKIP'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/README'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/Build.PL'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub-Uplevel-0.14/Makefile.PL'
[MSG] [Mon Jun 18 22:22:50 2007] Extracted 'Sub::Uplevel' to 
'/opt/perl/testers/.cpanplus/5.8.8/build/Sub-Uplevel-0.14'
[MSG] [Mon Jun 18 22:22:51 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Sub::Uplevel

[MSG] [Mon Jun 18 22:22:51 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Jun 18 22:22:53 2007] cp lib/Sub/Uplevel.pm blib/lib/Sub/Uplevel.pm
Manifying blib/man3/Sub::Uplevel.3

[MSG] [Mon Jun 18 22:22:54 2007] MAKE TEST passed: t/01_die_check..........ok
t/02_uplevel............ok
t/03_nested_uplevels....ok
t/98_pod................skipped
        all skipped: Skipping author tests
t/99_pod_coverage.......skipped
        all skipped: Skipping author tests
All tests successful, 2 tests skipped.
Files=5, Tests=125,  1 wallclock secs ( 0.72 cusr +  0.12 csys =  0.84 CPU)

[MSG] [Mon Jun 18 22:22:54 2007] Ok, not sending test report
[MSG] [Mon Jun 18 22:22:55 2007] cp lib/Test/Exception.pm 
blib/lib/Test/Exception.pm
Manifying blib/man3/Test::Exception.3

[MSG] [Mon Jun 18 22:22:57 2007] MAKE TEST passed: t/caller........ok
t/Exception.....ok
t/import........ok
t/isa...........ok
t/lives_and.....ok
t/preserve......ok
t/return........ok
t/rt............ok
t/stacktrace....ok
t/throws_ok.....ok
All tests successful.
Files=10, Tests=51,  1 wallclock secs ( 1.16 cusr +  0.42 csys =  1.58 CPU)

[MSG] [Mon Jun 18 22:22:57 2007] Ok, not sending test report
[MSG] [Mon Jun 18 22:22:59 2007] cp lib/Time/HiRes/Value.pm 
blib/lib/Time/HiRes/Value.pm
Manifying blib/man3/Time::HiRes::Value.3

[ERROR] [Mon Jun 18 22:23:01 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î 
(ioctl) t/01test......
#   Failed test 'multiply t2 * 4.2'
#   at t/01test.t line 82.
#          got: 6.299999
#     expected: 6.3

#   Failed test 'multiply t2 * -4.2'
#   at t/01test.t line 83.
#          got: -6.299999
#     expected: -6.3
# Looks like you failed 2 tests of 51.
dubious
        Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 37-38
        Failed 2/51 tests, 96.08% okay
t/02timing....ok
Failed Test Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/01test.t     2   512    51    2  37-38
Failed 1/2 test scripts. 2/53 subtests failed.
Files=2, Tests=53,  2 wallclock secs ( 0.30 cusr +  0.14 csys =  0.44 CPU)
Failed 1/2 test programs. 2/53 subtests failed.
make: *** [test_dynamic] Error 255


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
          Test::Exception                    0.25        0
          Test::More                         0.70        0
          Time::HiRes                      1.9707        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.20.12, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.20.12 #1 smp tue may 29 03:43:47 cst 2007 x86_64 
gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 
-Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid 
-Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement 
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', 
gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', 
lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E 
-Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

Reply via email to