This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear COOK, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Jun 22 15:17:20 2007] Trying to get 'http://www.cpan.org/authors/id/C/CO/COOK/Device-SerialPort-1.002001.tar.gz' [MSG] [Fri Jun 22 15:17:23 2007] Trying to get 'http://www.cpan.org/authors/id/C/CO/COOK/CHECKSUMS' [MSG] [Fri Jun 22 15:17:23 2007] Checksum matches for 'Device-SerialPort-1.002001.tar.gz' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/01timing.t' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/test1.t' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/test2.t' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/test3.t' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/test4.t' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/t/AltPort.pm' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/any_os.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/options.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example1.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example2.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example3.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example4.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example5.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example6.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example7.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/example8.txt' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo1.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo2.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo3.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo4.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo5.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo6.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo7.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/eg/demo8.plx' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/TODO' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/SerialPort.pm' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/SerialPort.xs' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/README' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/configure' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/Changes' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/Device-SerialPort.spec' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/modemtest' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/Makefile.PL' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/config.h.in' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/META.yml' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/show-tiocm.c.test' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/depcomp' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/config.guess' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/config.rpath' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/install-sh' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/config.sub' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/missing' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/autotools/mkinstalldirs' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device-SerialPort-1.002001/MANIFEST' [MSG] [Fri Jun 22 15:17:24 2007] Extracted 'Device::SerialPort' to '/home/chris/.cpanplus/5.8.8/build/Device-SerialPort-1.002001' [MSG] [Fri Jun 22 15:18:07 2007] Trying to find a serial port for testing... (use 'perl Makefile.PL TESTPORT=<DEVICE>' to override this search) checking '/dev/ttyS1' ... nope checking '/dev/cua01' ... character device PLEASE NOTE: If you run 'make test', you must make sure that nothing is plugged into '/dev/cua01'! Running ./configure ... checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for gcc option to accept ISO C99... -std=gnu99 checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 checking how to run the C preprocessor... gcc -std=gnu99 -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for library containing strerror... none required checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking sys/termiox.h usability... no checking sys/termiox.h presence... no checking for sys/termiox.h... no checking sys/termios.h usability... yes checking sys/termios.h presence... yes checking for sys/termios.h... yes checking sys/ttycom.h usability... yes checking sys/ttycom.h presence... yes checking for sys/ttycom.h... yes checking sys/modem.h usability... no checking sys/modem.h presence... no checking for sys/modem.h... no checking definition of _SC_CLK_TCK... found checking definition of TIOCMBIS... found checking definition of TIOCMBIC... found checking definition of TIOCMGET... found checking definition of CRTSCTS... found checking definition of OCRNL... found checking definition of ONLCR... found checking definition of ECHOKE... found checking definition of ECHOCTL... found checking definition of TIOCM_CAR... found checking definition of TIOCM_CD... found checking definition of TIOCM_RNG... found checking definition of TIOCM_RI... found checking definition of TIOCM_CTS... found checking definition of TIOCM_DSR... found checking definition of TIOCMIWAIT... missing checking definition of TIOCGICOUNT... missing checking definition of TIOCINQ... missing checking definition of FIONREAD... found checking definition of TIOCOUTQ... found checking definition of TIOCSER_TEMT... missing checking definition of TIOCM_LE... found checking definition of TIOCSERGETLSR... missing checking definition of TIOCSDTR... found checking definition of TIOCCDTR... found checking definition of TIOCM_RTS... found checking definition of TIOCM_DTR... found checking definition of CTSXON... missing checking definition of RTSXOFF... missing checking definition of TCGETX... missing checking definition of TCSETX... missing checking definition of B0... found checking definition of B50... found checking definition of B75... found checking definition of B110... found checking definition of B134... found checking definition of B150... found checking definition of B200... found checking definition of B300... found checking definition of B600... found checking definition of B1200... found checking definition of B1800... found checking definition of B2400... found checking definition of B4800... found checking definition of B9600... found checking definition of B19200... found checking definition of B38400... found checking definition of B57600... found checking definition of B115200... found checking definition of B230400... found checking definition of B460800... missing checking definition of B500000... missing checking definition of B576000... missing checking definition of B921600... missing checking definition of B1000000... missing checking definition of B1152000... missing checking definition of B1500000... missing checking definition of B2000000... missing checking definition of B2500000... missing checking definition of B3000000... missing checking definition of B3500000... missing checking definition of B4000000... missing checking serial control via ioctl... yes checking read/write of RTS signal... yes checking read/write of DTR signal... yes checking read access to modem lines... yes checking read access to buffer status... no configure: WARNING: You will not be able to check the serial buffer state (to test for flushes) checking read access to serial line status... no configure: WARNING: You will not be able to check serial line status (to do full write flush) checking normal CTS/RTS flow control... yes configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for Device::SerialPort You're ready to run 'make' now... [MSG] [Fri Jun 22 15:18:07 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Jun 22 15:18:11 2007] cp SerialPort.pm blib/lib/Device/SerialPort.pm /home/chris/perl588/bin/perl /home/chris/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /home/chris/perl588/lib/5.8.8/ExtUtils/typemap SerialPort.xs > SerialPort.xsc && mv SerialPort.xsc SerialPort.c cc -c -I. -pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include -O2 -DVERSION=\"1.002001\" -DXS_VERSION=\"1.002001\" -DPIC -fPIC "-I/home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi/CORE" SerialPort.c Running Mkbootstrap for Device::SerialPort () chmod 644 SerialPort.bs rm -f blib/arch/auto/Device/SerialPort/SerialPort.so cc -shared -fPIC -L/usr/local/lib SerialPort.o -o blib/arch/auto/Device/SerialPort/SerialPort.so chmod 755 blib/arch/auto/Device/SerialPort/SerialPort.so cp SerialPort.bs blib/arch/auto/Device/SerialPort/SerialPort.bs chmod 644 blib/arch/auto/Device/SerialPort/SerialPort.bs cp modemtest blib/script/modemtest /home/chris/perl588/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/modemtest Manifying blib/man1/modemtest.1 Manifying blib/man3/Device::SerialPort.3 [ERROR] [Fri Jun 22 15:18:14 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01timing....ok t/test1.......# Using '/dev/cua01' as test port. # Failed test at t/test1.t line 121. 7: could not open port '/dev/cua01'. Are permissions correct? # Looks like you failed 1 test of 21. # Looks like your test died just after 21. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED test 21 Failed 1/21 tests, 95.24% okay t/test2.......can't open file: cua01_test.cfg: No such file or directory at t/test2.t line 90 dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests 2-46 Failed 45/46 tests, 2.17% okay t/test3.......dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests 7-159 Failed 153/159 tests, 3.77% okay t/test4.......can't open file: cua01_test.cfg: No such file or directory at t/test4.t line 92 dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED tests 2-341 Failed 340/341 tests, 0.29% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/test1.t 255 65280 21 1 21 t/test2.t 1 256 46 89 2-46 t/test3.t 1 256 159 305 7-159 t/test4.t 1 256 341 679 2-341 Failed 4/5 test scripts. 539/574 subtests failed. Files=5, Tests=574, 3 wallclock secs ( 0.10 cusr + 0.82 csys = 0.92 CPU) Failed 4/5 test programs. 539/574 subtests failed. *** Error code 1 Stop in /home/chris/.cpanplus/5.8.8/build/Device-SerialPort-1.002001 (line 930 of Makefile). [MSG] [Fri Jun 22 15:18:14 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.70 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Device-SerialPort-1.002001/blib/lib:/home/chris/.cpanplus/5.8.8/build/Device-SerialPort-1.002001/blib/arch:/home/chris/.cpanplus/5.8.8/build/Device-SerialPort-1.002001/blib PERL5_CPANPLUS_IS_RUNNING = 11547 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 0 10 EGID: $) = 10 0 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
