This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear LEOCHARRE, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Jun 30 21:28:19 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/L/LE/LEOCHARRE/LEOCHARRE-CLI-1.02.tar.gz' [MSG] [Sat Jun 30 21:28:20 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/L/LE/LEOCHARRE/CHECKSUMS' [MSG] [Sat Jun 30 21:28:21 2007] Checksum matches for 'LEOCHARRE-CLI-1.02.tar.gz' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/lib/' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/lib/LEOCHARRE/' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/lib/LEOCHARRE/CLI.pm' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/META.yml' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/bin/' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/bin/renamerfpi' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/bin/mkperlbin' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/t/' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/t/0.t' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/MANIFEST' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE-CLI-1.02/Makefile.PL' [MSG] [Sat Jun 30 21:28:22 2007] Extracted 'LEOCHARRE::CLI' to '/home/xavier/.cpanplus/5.8.8/build/LEOCHARRE-CLI-1.02' [MSG] [Sat Jun 30 21:28:22 2007] Checking if your kit is complete... Looks good Writing Makefile for LEOCHARRE::CLI [MSG] [Sat Jun 30 21:28:22 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Jun 30 21:28:24 2007] cp lib/LEOCHARRE/CLI.pm blib/lib/LEOCHARRE/CLI.pm cp bin/renamerfpi blib/script/renamerfpi /usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/renamerfpi cp bin/mkperlbin blib/script/mkperlbin /usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/mkperlbin Manifying blib/man1/renamerfpi.1p Manifying blib/man1/mkperlbin.1p Manifying blib/man3/LEOCHARRE::CLI.3pm [ERROR] [Sat Jun 30 21:28:24 2007] MAKE TEST failed: Repérage illégal PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/0....t/0.t, [/home/xavier/.cpanplus/5.8.8/build/LEOCHARRE-CLI-1.02/t/test.conf] does not exist. at lib/LEOCHARRE/CLI.pm line 215. Use of uninitialized value in numeric eq (==) at t/0.t line 13. # Failed test 'config() works' # in t/0.t at line 13. # Looks like you failed 1 test of 3. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 2 Failed 1/3 tests, 66.67% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/0.t 1 256 3 1 33.33% 2 Failed 1/1 test scripts, 0.00% okay. 1/3 subtests failed, 66.67% okay. make: *** [test_dynamic] Erreur 1 [MSG] [Sat Jun 30 21:28:24 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Carp 1.04 0 Getopt::Std 1.05 0 YAML 0.62 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.18.3, archname=i486-linux-gnu-thread-multi uname='linux saens 2.6.18.3 #1 smp sat nov 25 13:39:52 est 2006 i686 gnulinux ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8 -Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-20)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt perllibs=-ldl -lm -lpthread -lc -lcrypt libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so.5.8.8 gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
