This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear SIMONW, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jul 18 02:23:46 2007] Trying to get 'http://www.cpan.org/authors/id/S/SI/SIMONW/Net-Google-AuthSub-0.1.tar.gz' [MSG] [Wed Jul 18 02:23:47 2007] Trying to get 'http://www.cpan.org/authors/id/S/SI/SIMONW/CHECKSUMS' [MSG] [Wed Jul 18 02:23:49 2007] Checksum matches for 'Net-Google-AuthSub-0.1.tar.gz' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/META.yml' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/t' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/lib' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/MANIFEST' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/Build.PL' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/Makefile.PL' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/lib/Net' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/lib/Net/Google' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/lib/Net/Google/AuthSub' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/lib/Net/Google/AuthSub.pm' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/lib/Net/Google/AuthSub/Response.pm' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/t/00use.t' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/t/pod-coverage.t' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net-Google-AuthSub-0.1/t/pod.t' [MSG] [Wed Jul 18 02:23:49 2007] Extracted 'Net::Google::AuthSub' to '/export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1' [MSG] [Wed Jul 18 02:23:51 2007] Checking if your kit is complete... Looks good Writing Makefile for Net::Google::AuthSub [MSG] [Wed Jul 18 02:23:51 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Jul 18 02:23:54 2007] cp lib/Net/Google/AuthSub/Response.pm blib/lib/Net/Google/AuthSub/Response.pm cp lib/Net/Google/AuthSub.pm blib/lib/Net/Google/AuthSub.pm Manifying blib/man3/Net::Google::AuthSub::Response.3pm Manifying blib/man3/Net::Google::AuthSub.3pm [ERROR] [Wed Jul 18 02:23:56 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00use........... # Failed test 'use Net::Google::AuthSub::Response;' # at t/00use.t line 6. # Tried to use 'Net::Google::AuthSub::Response'. # Error: Can't locate JSON/Any.pm in @INC (@INC contains: /export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib/lib /export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib/arch /export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib /etc/perl /usr/local/lib/perl/5.8.7 /usr/local/share/perl/5.8.7 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl . /etc/perl /usr/local/lib/perl/5.8.7 /usr/local/share/perl/5.8.7 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib/lib/Net/Google/AuthSub/Response.pm line 6. # BEGIN failed--compilation aborted at t/00use.t line 6. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 2. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/2 tests, 50.00% okay t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00use.t 1 256 2 1 1 2 tests skipped. Failed 1/3 test scripts. 1/2 subtests failed. Files=3, Tests=2, 1 wallclock secs ( 0.34 cusr + 0.24 csys = 0.58 CPU) Failed 1/3 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 29 [MSG] [Wed Jul 18 02:23:56 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: JSON::Any As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'SIMONW ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'JSON::Any' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want LWP::UserAgent 2.033 0 Test::More 0.70 0.62 URI 1.35 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/usr/bin/X11:/usr/games PERL5LIB = :/export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib/lib:/export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib/arch:/export/home/chris/.cpanplus/5.8.7/build/Net-Google-AuthSub-0.1/blib PERL5_CPANPLUS_IS_RUNNING = 19177 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 10 EGID: $) = 10 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=solaris, osvers=2.11, archname=i386-pc-solaris2.11-thread-multi uname='sunos kernelunix.org 5.11 elatte:os_20050909:2005-09-15 i86pc i386 i86pc solaris ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcc=gcc -Dldflags=-lm -Dlddlflags=-shared -Dccdlflags=-Wl,-E -Dcccdlflags=-fPIC -Darchname=i386-pc-solaris2.11 -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.7 -Dsitearch=/usr/local/lib/perl/5.8.7 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.7 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-D_REENTRANT -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3 20060113 (prerelease) (GNU_Solaris 4.0.2-6nexenta3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags ='-lm -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lm -lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lrt -lnsl -lsocket perllibs=-lm -ldl -lm -lpthread -lc -lrt -lnsl -lsocket libc=, so=so, useshrplib=true, libperl=libperl.so.5.8.7 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -R /usr/lib/perl/5.8/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
