This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to [EMAIL PROTECTED] to keep other
test volunteers informed and to prevent any duplicate effort.
--
This is an error report generated automatically by CPANPLUS.
Below is the error stack during 'make test':
PERL_DL_NONLAZY=1 /home/local/bin/perl5.8.0 "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-md4............Test header seen more than once!
FAILED tests 1-6
Failed 6/6 tests, 0.00% okay
t/02-md5............ok
t/03-interactive....
Testing interactive mode: enter 'pwd' (without quotes) at the prompt:
Reminder - Do not use this program while logged in via telnet or rlogin.
Enter secret password: Can't locate Digest/MD4.pm in @INC (@INC contains:
/home/spool/cpanplus/build/Crypt-SKey-0.04/blib/lib
/home/spool/cpanplus/build/Crypt-SKey-0.04/blib/arch
/home/spool/cpanplus/build/Crypt-OpenPGP-1.01/blib/lib
/home/spool/cpanplus/build/Crypt-OpenPGP-1.01/blib/arch
/home/spool/cpanplus/build/Crypt-DSA-0.12/blib/lib
/home/spool/cpanplus/build/Crypt-DSA-0.12/blib/arch
/home/spool/cpanplus/build/Crypt-DES_EDE3-0.01/blib/lib
/home/spool/cpanplus/build/Crypt-DES_EDE3-0.01/blib/arch
/home/spool/cpanplus/build/Crypt-DES-2.03/blib/lib
/home/spool/cpanplus/build/Crypt-DES-2.03/blib/arch
/home/spool/cpanplus/build/Crypt-DES_EDE3-0.01/blib/lib
/home/spool/cpanplus/build/Crypt-DES_EDE3-0.01/blib/arch
/home/spool/cpanplus/build/Data-Buffer-0.04/blib/lib
/home/spool/cpanplus/build/Data-Buffer-0.04/blib/arch
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/lib
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/arch
/home/spool/cpanplus/build/Crypt-CBC-2.08/blib/lib /home/!
spool/cpanplus/build/Crypt-CBC-2.08/blib/arch
/home/spool/cpanplus/build/Digest-MD2-2.00/blib/lib
/home/spool/cpanplus/build/Digest-MD2-2.00/blib/arch
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/lib
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/arch
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/lib
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/arch
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/lib
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/arch
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/lib
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/arch
/home/spool/cpanplus/build/Sort-Versions-1.4/blib/lib
/home/spool/cpanplus/build/Sort-Versions-1.4/blib/arch
/home/spool/cpanplus/build/Convert-ASCII-Armour-1.4/blib/lib
/home/spool/cpanplus/build/Convert-ASCII-Armour-1.4/blib/arch
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/lib
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/arch
/home/spool/cpanplus/build/Crypt-GPG-1.!
40/blib/lib /home/spool/cpanplus/build/Crypt-GPG-1.40/blib/arch
/home/spool/cpanplus/build/Expect-1.15/blib/lib
/home/spool/cpanplus/build/Expect-1.15/blib/arch
/home/spool/cpanplus/build/IO-Tty-1.02/blib/lib
/home/spool/cpanplus/build/IO-Tty-1.02/blib/arch
/home/spool/cpanplus/build/IO-Tty-1.02/blib/lib
/home/spool/cpanplus/build/IO-Tty-1.02/blib/arch
/home/spool/cpanplus/build/Expect-1.15/blib/lib
/home/spool/cpanplus/build/Expect-1.15/blib/arch
/home/spool/cpanplus/build/TimeDate-1.1301/blib/lib
/home/spool/cpanplus/build/TimeDate-1.1301/blib/arch
/home/spool/cpanplus/build/Crypt-GPG-1.40/blib/lib
/home/spool/cpanplus/build/Crypt-GPG-1.40/blib/arch
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/lib
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/arch
/home/spool/cpanplus/build/Crypt-CBC-2.08/blib/lib
/home/spool/cpanplus/build/Crypt-CBC-2.08/blib/arch
/home/spool/cpanplus/build/Digest-MD2-2.00/blib/lib
/home/spool/cpanplus/build/Digest-MD2-2.00/blib/arch /home/spool/cpanpl!
us/build/Tie-EncryptedHash-1.21/blib/lib
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/arch
/home/spool/cpanplus/build/Crypt-DES-2.03/blib/lib
/home/spool/cpanplus/build/Crypt-DES-2.03/blib/arch
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/lib
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/arch
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/lib
/home/spool/cpanplus/build/Tie-EncryptedHash-1.21/blib/arch
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/lib
/home/spool/cpanplus/build/Crypt-Blowfish-2.09/blib/arch
/home/spool/cpanplus/build/Sort-Versions-1.4/blib/lib
/home/spool/cpanplus/build/Sort-Versions-1.4/blib/arch
/home/spool/cpanplus/build/Data-Buffer-0.04/blib/lib
/home/spool/cpanplus/build/Data-Buffer-0.04/blib/arch
/home/spool/cpanplus/build/Convert-ASCII-Armour-1.4/blib/lib
/home/spool/cpanplus/build/Convert-ASCII-Armour-1.4/blib/arch
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/lib
/home/spool/cpanplus/build/Crypt-RSA-1.48/blib/arc!
h /home/spool/cpanplus/build/Crypt-RSA-1.37/blib/lib
/home/spool/cpanplus/build/Crypt-RSA-1.37/blib/arch
/home/spool/cpanplus/build/Crypt-TripleDES-0.24/blib/lib /dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED test 2
Failed 1/2 tests, 50.00% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/01-md4.t 6 6 100.00% 1-6
t/03-interactive.t 2 512 2 1 50.00% 2
home/spool/cpanplus/build/Crypt-TripleDES-0.24/blib/arch
/home/spool/cpanplus/build/Crypt-CAST5_PP-1.02/blib/lib
/home/spool/cpanplus/build/Crypt-CAST5_PP-1.02/blib/arch
/home/spool/cpanplus/build/Crypt-Passwd-0.03/blib/lib
/home/spool/cpanplus/build/Crypt-Passwd-0.03/blib/arch
/home/spool/cpanplus/build/Crypt-RC4-2.02/blib/lib
/home/spool/cpanplus/build/Crypt-RC4-2.02/blib/arch
/home/spool/cpanplus/build/Crypt-CBCeasy-0.24/blib/lib
/home/spool/cpanplus/build/Crypt-CBCeasy-0.24/blib/arch
/home/spool/cpanplus/build/Crypt-CBC-2.08/blib/lib
/home/spool/cpanplus/build/Crypt-CBC-2.08/blib/arch
/home/spool/cpanplus/build/Crypt-CBCeasy-0.24/blib/lib
/home/spool/cpanplus/build/Crypt-CBCeasy-0.24/blib/arch
/home/spool/cpanplus/build/Crypt-PasswdMD5-1.2/blib/lib
/home/spool/cpanplus/build/Crypt-PasswdMD5-1.2/blib/arch
/home/spool/cpanplus/build/Crypt-TEA-1.25/blib/lib
/home/spool/cpanplus/build/Crypt-TEA-1.25/blib/arch
/home/spool/cpanplus/build/Crypt-IDEA-1.01/blib/lib /home/spool/cp!
anplus/build/Crypt-IDEA-1.01/blib/arch
/home/spool/cpanplus/build/Crypt-SmbHash-0.02/blib/lib
/home/spool/cpanplus/build/Crypt-SmbHash-0.02/blib/arch
/home/spool/cpanplus/build/Crypt-OTP-2.00/blib/lib
/home/spool/cpanplus/build/Crypt-OTP-2.00/blib/arch
/home/spool/cpanplus/build/Crypt-RIPEMD160-0.04/blib/lib
/home/spool/cpanplus/build/Crypt-RIPEMD160-0.04/blib/arch
/home/spool/cpanplus/build/Crypt-Solitaire-2.0/blib/lib
/home/spool/cpanplus/build/Crypt-Solitaire-2.0/blib/arch
/home/spool/cpanplus/build/Crypt-RC6-1.0/blib/lib
/home/spool/cpanplus/build/Crypt-RC6-1.0/blib/arch
/home/spool/cpanplus/build/Crypt-Twofish-2.12/blib/lib
/home/spool/cpanplus/build/Crypt-Twofish-2.12/blib/arch
/home/spool/cpanplus/build/Crypt-Blowfish_PP-1.12/blib/lib
/home/spool/cpanplus/build/Crypt-Blowfish_PP-1.12/blib/arch
/home/spool/cpanplus/build/Crypt-NULL-1.02/blib/lib
/home/spool/cpanplus/build/Crypt-NULL-1.02/blib/arch
/home/spool/cpanplus/build/Crypt-SKey-0.04/blib/lib /home/spool/cpanplus!
/build/Crypt-SKey-0.04/blib/arch /usr/local/lib/perl5/5.8.0/i586-linux
/usr/local/lib/perl5/5.8.0/i586-linux /usr/local/lib/perl5/5.8.0
/usr/local/lib/perl5/site_perl/5.8.0/i586-linux
/usr/local/lib/perl5/site_perl/5.8.0/i586-linux /usr/local/lib/perl5/site_perl/5.8.0
/usr/local/lib/perl5/site_perl/5.8.0/i586-linux /usr/local/lib/perl5/site_perl/5.8.0
/usr/local/lib/perl5/site_perl . /usr/local/lib/perl5/5.8.0/i586-linux
/usr/local/lib/perl5/5.8.0 /usr/local/lib/perl5/site_perl/5.8.0/i586-linux
/usr/local/lib/perl5/site_perl/5.8.0 /usr/local/lib/perl5/site_perl .) at
/home/spool/cpanplus/build/Crypt-SKey-0.04/blib/lib/Crypt/SKey.pm line 226, <STDIN>
line 1.
Failed 2/3 test scripts, 33.33% okay. 7/14 subtests failed, 50.00% okay.
make: *** [test_dynamic] Error 2
Additional comments:
Hello, Ken Williams! Thanks for uploading your works to CPAN.
I noticed that the test suite seem to fail without these modules:
Digest::MD4
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Ken Williams ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'Digest::MD4' => '0', # or a minimum workable version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/search?dist=ExtUtils-AutoInstall> may be
worth a look.
Thanks! :-)
--
Summary of my perl5 (revision 5.0 version 8 subversion 0) configuration:
Platform:
osname=linux, osvers=2.2.16c32_iii, archname=i586-linux
uname='linux www.arens.nl 2.2.16c32_iii #1 fri nov 9 21:54:54 pst 2001 i586
unknown '
config_args='-Uinstallusrbinperl -ds'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O3',
cppflags='-fno-strict-aliasing -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='2.95.3 20010315 (release)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lndbm -lgdbm -ldb -ldl -lm -lc -lposix -lcrypt -lutil
perllibs=-lnsl -ldl -lm -lc -lposix -lcrypt -lutil
libc=/lib/libc-2.1.3.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.1.3'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
