This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Marc Lehmann, This is a computer-generated error report created automatically by CPANPLUS, version 0.81_01. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Aug 12 12:36:43 2007] Trying to get 'http://www.cpan.org/authors/id/X/XA/XANTUS/POE-Component-AIO-1.00.tar.gz' [MSG] [Sun Aug 12 12:36:43 2007] Trying to get 'http://www.cpan.org/authors/id/X/XA/XANTUS/CHECKSUMS' [MSG] [Sun Aug 12 12:36:44 2007] Checksum matches for 'POE-Component-AIO-1.00.tar.gz' [MSG] [Sun Aug 12 12:36:44 2007] Extracted 'POE-Component-AIO-1.00/' [MSG] [Sun Aug 12 12:36:44 2007] Extracted 'POE-Component-AIO-1.00/t/' [MSG] [Sun Aug 12 12:36:44 2007] Extracted 'POE-Component-AIO-1.00/t/00_callback.t' [MSG] [Sun Aug 12 12:36:44 2007] Extracted 'POE-Component-AIO-1.00/MANIFEST' [MSG] [Sun Aug 12 12:36:44 2007] Extracted 'POE-Component-AIO-1.00/META.yml' [MSG] [Sun Aug 12 12:36:44 2007] Extracted 'POE-Component-AIO-1.00/examples/' [MSG] [Sun Aug 12 12:36:45 2007] Extracted 'POE-Component-AIO-1.00/examples/readfile.pl' [MSG] [Sun Aug 12 12:36:45 2007] Extracted 'POE-Component-AIO-1.00/AIO.pm' [MSG] [Sun Aug 12 12:36:45 2007] Extracted 'POE-Component-AIO-1.00/Changes' [MSG] [Sun Aug 12 12:36:45 2007] Extracted 'POE-Component-AIO-1.00/README' [MSG] [Sun Aug 12 12:36:45 2007] Extracted 'POE-Component-AIO-1.00/Makefile.PL' [MSG] [Sun Aug 12 12:36:45 2007] Extracted 'POE::Component::AIO' to '/home/chris/dev/blead/.cpanplus/5.9.5/build/POE-Component-AIO-1.00' [MSG] [Sun Aug 12 12:36:45 2007] Checking if your kit is complete... Looks good Warning: prerequisite IO::AIO not found. Warning: prerequisite POE not found. Writing Makefile for POE::Component::AIO [MSG] [Sun Aug 12 12:36:45 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Aug 12 12:36:45 2007] Module 'POE::Component::AIO' requires 'IO::AIO' version '0.0' to be installed [MSG] [Sun Aug 12 12:36:45 2007] Module 'POE::Component::AIO' requires 'POE' version '0.0' to be installed [MSG] [Sun Aug 12 12:36:45 2007] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/IO-AIO-2.4.tar.gz' [MSG] [Sun Aug 12 12:36:47 2007] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/CHECKSUMS' [MSG] [Sun Aug 12 12:36:48 2007] Checksum matches for 'IO-AIO-2.4.tar.gz' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/06_group.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/07_feeder.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/02_read.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/04_fork.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/05_readdir.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/03_errors.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/01_stat.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/aio_test_common.pm' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/t/00_load.t' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/genac' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/README' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/autoconf/' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/autoconf/configure' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/autoconf/configure.ac' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/autoconf/config.h.in' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/Changes' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/Makefile.PL' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/xthread.h' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/META.yml' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/typemap' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/autoconf.pm' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/COPYING' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/AIO.pm' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/AIO.xs' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO-AIO-2.4/MANIFEST' [MSG] [Sun Aug 12 12:36:48 2007] Extracted 'IO::AIO' to '/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-AIO-2.4' [MSG] [Sun Aug 12 12:36:53 2007] checking for gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking for futimes... yes checking for readahead... no checking for fdatasync... yes checking for pread and pwrite... yes checking for readdir_r... yes checking for sendfile... no configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for IO::AIO [MSG] [Sun Aug 12 12:36:53 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Aug 12 12:37:00 2007] cp AIO.pm blib/lib/IO/AIO.pm /home/chris/dev/blead/bin/perl5.9.5 /home/chris/dev/blead/lib/perl5/5.9.5/ExtUtils/xsubpp -typemap /home/chris/dev/blead/lib/perl5/5.9.5/ExtUtils/typemap -typemap typemap AIO.xs > AIO.xsc && mv AIO.xsc AIO.c cc -c -fno-strict-aliasing -pipe -I/usr/pkg/include -O -DVERSION=\"2.4\" -DXS_VERSION=\"2.4\" -DPIC -fPIC "-I/home/chris/dev/blead/lib/perl5/5.9.5/i386-netbsd-thread-multi-64int/CORE" AIO.c Running Mkbootstrap for IO::AIO () chmod 644 AIO.bs rm -f blib/arch/auto/IO/AIO/AIO.so LD_RUN_PATH="/usr/lib" cc --whole-archive -shared -L/usr/pkg/lib AIO.o -o blib/arch/auto/IO/AIO/AIO.so \ -lpthread -lrt \ chmod 755 blib/arch/auto/IO/AIO/AIO.so cp AIO.bs blib/arch/auto/IO/AIO/AIO.bs chmod 644 blib/arch/auto/IO/AIO/AIO.bs Manifying blib/man3/IO::AIO.3 [ERROR] [Sun Aug 12 12:37:02 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/dev/blead/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.......ok t/01_stat.......ok t/02_read.......ok t/03_errors.....ok t/04_fork.......Confused test output: test 4 answered after test 5 Confused test output: test 5 answered after test 6 Confused test output: test 6 answered after test 7 Confused test output: test 7 answered after test 8 FAILED tests 3-4 Failed 2/9 tests, 77.78% okay t/05_readdir....ok t/06_group......ok t/07_feeder.....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/04_fork.t 9 2 3-4 Failed 1/8 test scripts. 2/63 subtests failed. Files=8, Tests=63, 2 wallclock secs ( 0.91 cusr + 0.30 csys = 1.21 CPU) Failed 1/8 test programs. 2/63 subtests failed. gmake: *** [test_dynamic] Error 255 [MSG] [Sun Aug 12 12:37:02 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/bin:/bin:/usr/pkg/bin:/usr/local/bin:/usr/X11R6/bin PERL5LIB = :/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-AIO-2.4/blib/lib:/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-AIO-2.4/blib/arch:/home/chris/dev/blead/.cpanplus/5.9.5/build/IO-AIO-2.4/blib PERL5_CPANPLUS_IS_RUNNING = 13091 PERL5_CPANPLUS_IS_VERSION = 0.81_01 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/dev/blead/bin/perl5.9.5 UID: $< = 1001 EUID: $> = 1001 GID: $( = 100 100 0 EGID: $) = 100 100 0 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5 patch 31701) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=previous, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include -fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
