This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JV, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Aug 16 21:27:40 2007] Trying to get 'http://www.cpan.org/authors/id/J/JV/JV/File-PerlMove-0.04.tar.gz' [MSG] [Thu Aug 16 21:27:41 2007] Trying to get 'http://www.cpan.org/authors/id/J/JV/JV/CHECKSUMS' [MSG] [Thu Aug 16 21:27:43 2007] Checksum matches for 'File-PerlMove-0.04.tar.gz' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/Makefile.PL' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/t/' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/t/02link.t' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/t/03symlink.t' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/t/04dirs.t' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/t/00common.pl' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/t/01basic.t' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/META.yml' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/CHANGES' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/README' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/lib/' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/lib/File/' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/lib/File/PerlMove.pm' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/perl-File-PerlMove.spec' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/script/' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/script/pmv' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File-PerlMove-0.04/MANIFEST' [MSG] [Thu Aug 16 21:27:43 2007] Extracted 'File::PerlMove' to '/opt/perl/testers/.cpanplus/5.8.8/build/File-PerlMove-0.04' [MSG] [Thu Aug 16 21:27:44 2007] Checking if your kit is complete... Looks good Writing Makefile for File::PerlMove [MSG] [Thu Aug 16 21:27:44 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Aug 16 21:27:46 2007] cp lib/File/PerlMove.pm blib/lib/File/PerlMove.pm Manifying blib/man1/pmv.1 Manifying blib/man3/File::PerlMove.3 [ERROR] [Thu Aug 16 21:27:47 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01basic......ok t/02link.......ok t/03symlink....ok t/04dirs....... # Failed test 'move1 warning' # at t/04dirs.t line 20. # '01basic.dat: [EMAIL PROTECTED] # ' # doesn't match '(?i-xsm:: no such file or directory)' # Looks like you failed 1 test of 7. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 5 Failed 1/7 tests, 85.71% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/04dirs.t 1 256 7 1 5 Failed 1/4 test scripts. 1/36 subtests failed. Files=4, Tests=36, 0 wallclock secs ( 0.24 cusr + 0.22 csys = 0.46 CPU) Failed 1/4 test programs. 1/36 subtests failed. make: *** [test_dynamic] Error 1 [MSG] [Thu Aug 16 21:27:47 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want File::Basename 2.74 0 File::Path 1.08 0 Getopt::Long 2.36 2 Test::More 0.70 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.20.12, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.20.12 #1 smp tue may 29 03:43:47 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
