This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear CHRMUE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Aug 22 07:37:19 2007] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CH/CHRMUE/Socket-Class-1.0.0.tar.gz'
[MSG] [Wed Aug 22 07:37:19 2007] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CH/CHRMUE/CHECKSUMS'
[MSG] [Wed Aug 22 07:37:19 2007] Checksum matches for 
'Socket-Class-1.0.0.tar.gz'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/t/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/t/3_unix.t'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/t/4_threads.t'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/t/0_basic.t'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/t/2_inet6.t'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/t/1_inet.t'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/xs/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/xs/Socket/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/xs/Socket/Class/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/t/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/t/0_dummy.t'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/sc_bluez.c'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/sc_bluez.h'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/socket_class.c'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/socket_class.h'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/Bluetooth.xs'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/Makefile.PL'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/Class.pm'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/Class.xs'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/sc_ws2bth.c'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Class/sc_ws2bth.h'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/xs/Socket/Makefile.PL'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/xs/Makefile.PL'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/lib/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/lib/Socket/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/lib/Socket/Class/'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/lib/Socket/Class/Const.pm'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 
'Socket-Class-1.0.0/lib/Socket/Class/Async.pm'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/README'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/Changes'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/Makefile.PL'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/META.yml'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket-Class-1.0.0/MANIFEST'
[MSG] [Wed Aug 22 07:37:19 2007] Extracted 'Socket::Class' to 
'/home/plu/perl/5.8.8/.cpanplus/5.8.8/build/Socket-Class-1.0.0'
[MSG] [Wed Aug 22 07:37:20 2007] ************* WARNING *************
* Your operation system has not   *
* been tested.                    *
* The installation may fail!      *
***********************************
Checking if your kit is complete...
Looks good
Looking for 'freeaddrinfo' ... found
Writing Makefile for Socket::Class
Writing Makefile for Socket
Writing Makefile for xs
Writing Makefile for Socket::Class

[MSG] [Wed Aug 22 07:37:20 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Wed Aug 22 07:37:22 2007] cp lib/Socket/Class/Async.pm 
blib/lib/Socket/Class/Async.pm
cp lib/Socket/Class/Const.pm blib/lib/Socket/Class/Const.pm
cp Class.pm ../../../blib/lib/Socket/Class.pm
cc -c  -I../../../  -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing 
-pipe -Wdeclaration-after-statement -I/usr/local/include -O3    
-DVERSION=\"1.0.0\"  -DXS_VERSION=\"1.0.0\" -DPIC -fPIC 
"-I/home/plu/perl/5.8.8/lib/5.8.8/i386-freebsd/CORE"   socket_class.c
/home/plu/perl/5.8.8/bin/perl 
/usr/home/plu/perl/5.8.8/lib/5.8.8/ExtUtils/xsubpp -noprototypes -typemap 
/home/plu/perl/5.8.8/lib/5.8.8/ExtUtils/typemap  Class.xs > Class.xsc && mv 
Class.xsc Class.c
cc -c  -I../../../  -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing 
-pipe -Wdeclaration-after-statement -I/usr/local/include -O3    
-DVERSION=\"1.0.0\"  -DXS_VERSION=\"1.0.0\" -DPIC -fPIC 
"-I/home/plu/perl/5.8.8/lib/5.8.8/i386-freebsd/CORE"   Class.c
Running Mkbootstrap for Socket::Class ()
chmod 644 Class.bs
rm -f ../../../blib/arch/auto/Socket/Class/Class.so
cc  -shared  -L/usr/local/lib socket_class.o  Class.o  -o 
../../../blib/arch/auto/Socket/Class/Class.so                  
chmod 755 ../../../blib/arch/auto/Socket/Class/Class.so
cp Class.bs ../../../blib/arch/auto/Socket/Class/Class.bs
chmod 644 ../../../blib/arch/auto/Socket/Class/Class.bs
Manifying ../../../blib/man3/Socket::Class.3
Manifying blib/man3/Socket::Class::Async.3
Manifying blib/man3/Socket::Class::Const.3

[ERROR] [Wed Aug 22 07:37:23 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 
/home/plu/perl/5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 
'blib/lib', 'blib/arch')" t/*.t
t/0_basic......ok
t/1_inet.......ok
t/2_inet6......Protocol not supported at t/2_inet6.t line 13.
FAILED before any test output arrived
t/3_unix.......ok
t/4_threads....t/4_threads.t line 3:

This Perl hasn't been configured and built properly for the threads
module to work.  (The 'useithreads' configuration option hasn't been used.)

Having threads support requires all of Perl and all of the XS modules in
the Perl installation to be rebuilt, it is not just a question of adding
the threads module.  (In other words, threaded and non-threaded Perls
are binary incompatible.)

If you want to the use the threads module, please contact the people
who built your Perl.

Cannot continue, aborting.
BEGIN failed--compilation aborted at 
/home/plu/perl/5.8.8/lib/5.8.8/i386-freebsd/threads.pm line 28.
Compilation failed in require at t/4_threads.t line 3.
BEGIN failed--compilation aborted at t/4_threads.t line 3.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
Failed Test   Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/2_inet6.t                 ??   ??  ??
t/4_threads.t  255 65280    ??   ??  ??
Failed 2/5 test scripts. 7/24 subtests failed.
Files=5, Tests=24,  1 wallclock secs ( 0.06 cusr +  0.01 csys =  0.07 CPU)
Failed 2/5 test programs. 7/24 subtests failed.
*** Error code 255

Stop in /usr/home/plu/perl/5.8.8/.cpanplus/5.8.8/build/Socket-Class-1.0.0.

[MSG] [Wed Aug 22 07:37:23 2007] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
          Module Name                        Have     Want
          Time::HiRes                        1.86        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/home/plu/bin
    PERL5LIB = 
:/home/plu/perl/5.8.8/.cpanplus/5.8.8/build/Socket-Class-1.0.0/blib/lib:/home/plu/perl/5.8.8/.cpanplus/5.8.8/build/Socket-Class-1.0.0/blib/arch:/home/plu/perl/5.8.8/.cpanplus/5.8.8/build/Socket-Class-1.0.0/blib
    PERL5_CPANPLUS_IS_RUNNING = 65236
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/plu/perl/5.8.8/bin/perl
    UID:  $<  = 1001
    EUID: $>  = 1001
    GID:  $(  = 1001 0 1001 1001
    EGID: $)  = 1001 0 1001 1001


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=freebsd, osvers=6.1-release-p6, archname=i386-freebsd
    uname='freebsd smoker 6.1-release-p6 freebsd 6.1-release-p6 #3: tue sep 12 
13:15:56 cest 2006 [EMAIL PROTECTED]:usrobjusrsrcsysgamma i386 '
    config_args='-Dprefix=/home/plu/perl/5.8.8 -de'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef 
usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include',
    optimize='-O',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe 
-Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-Wl,-E  -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib
    libs=-lm -lcrypt -lutil -lc
    perllibs=-lm -lcrypt -lutil -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib'

Reply via email to