This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear DOY, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Aug 23 13:46:17 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DO/DOY/IO-Pty-Easy-0.02.tar.gz' [MSG] [Thu Aug 23 13:46:18 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DO/DOY/CHECKSUMS' [MSG] [Thu Aug 23 13:46:18 2007] Checksum matches for 'IO-Pty-Easy-0.02.tar.gz' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/010-read-write.t' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/002-spawn.t' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/003-subprocess.t' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/001-open-close.t' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/000-load.t' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/t/004-undefined-program.t' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Can.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Base.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Win32.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/WriteAll.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/AutoInstall.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Makefile.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Fetch.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Include.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install/Metadata.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/Install.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/inc/Module/AutoInstall.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/lib/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/lib/IO/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/lib/IO/Pty/' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/lib/IO/Pty/Easy.pm' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/README' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/Changes' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/Makefile.PL' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/META.yml' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO-Pty-Easy-0.02/MANIFEST' [MSG] [Thu Aug 23 13:46:18 2007] Extracted 'IO::Pty::Easy' to '/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02' [MSG] [Thu Aug 23 13:46:19 2007] Cannot determine perl version info from lib/IO/Pty/Easy.pm *** Module::AutoInstall version 1.03 *** Checking for Perl dependencies... [Core Features] - Test::More ...loaded. (0.7) - IO::Pty ...missing. - Carp ...loaded. (1.07) ==> Auto-install the 1 mandatory module(s) from CPAN? [Y/n] y *** Since we're running under CPANPLUS, I'll just let it take care of the dependency's installation later. *** Module::AutoInstall configuration finished. Checking if your kit is complete... Looks good Warning: prerequisite IO::Pty 0 not found. Writing Makefile for IO::Pty::Easy [MSG] [Thu Aug 23 13:46:19 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Aug 23 13:46:19 2007] Module 'IO::Pty::Easy' requires 'IO::Pty' version '0' to be installed [MSG] [Thu Aug 23 13:46:19 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/R/RG/RGIERSIG/CHECKSUMS' [MSG] [Thu Aug 23 13:46:20 2007] Checksum matches for 'IO-Tty-1.07.tar.gz' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/ChangeLog' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/Makefile.PL' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/MANIFEST' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/META.yml' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/Pty.pm' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/README' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/test.pl' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/try' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/Tty.pm' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO-Tty-1.07/Tty.xs' [MSG] [Thu Aug 23 13:46:20 2007] Extracted 'IO::Pty' to '/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07' [MSG] [Thu Aug 23 13:46:27 2007] Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ not found. Looking for grantpt()...... FOUND. Looking for openpty()...... FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... not found. Looking for sigaction().... FOUND. Looking for strlcpy()...... FOUND. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... FOUND. Looking for pty.h.......... not found. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. not found. Looking for termio.h....... not found. Looking for termios.h...... FOUND. Looking for util.h......... not found. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 +B76800 +B9600 +BRKINT -BS0 -BS1 -BSDLY -CBAUD -CBAUDEXT +CBRK +CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH -CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT -CR0 -CR1 -CR2 -CR3 -CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF +CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB -FF0 -FF1 -FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP -IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS -NL0 -NL1 -NLDLY +NOFLSH +OCRNL -OFDEL -OFILL -OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG -TAB0 -TAB1 -TAB2 -TAB3 -TABDLY -TCDSET -TCFLSH -TCGETA -TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW -TCSBRK -TCSETA -TCSETAF -TCSETAW -TCSETCTTY -TCSETS -TCSETSF -TCSETSW -TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK +TIOCCDTR +TIOCCONS +TIOCEXCL +TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP -TIOCGSID -TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY +TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID -TIOCSSOFTCAR +TIOCSTART +TIOCSTI +TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD +VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH -VT0 -VT1 -VTDLY +VTIME +VWERASE -WRAP -XCASE -XCLUDE -XMT1EN -XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_GRANTPT -DHAVE_LIBUTIL_H -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Writing Makefile for IO::Tty [MSG] [Thu Aug 23 13:46:27 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Aug 23 13:46:29 2007] Skip blib/lib/IO/Tty.pm (unchanged) Skip blib/lib/IO/Tty/Constant.pm (unchanged) Skip blib/lib/IO/Pty.pm (unchanged) cc -c -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include -O -DVERSION=\"1.07\" -DXS_VERSION=\"1.07\" -DPIC -fPIC "-I/home/plu/blead/lib/perl5/5.9.5/i386-freebsd-thread-multi/CORE" -DHAVE_GRANTPT -DHAVE_LIBUTIL_H -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c Running Mkbootstrap for IO::Tty () chmod 644 Tty.bs rm -f blib/arch/auto/IO/Tty/Tty.so LD_RUN_PATH="/usr/lib" cc -shared -L/usr/local/lib Tty.o -o blib/arch/auto/IO/Tty/Tty.so -lutil chmod 755 blib/arch/auto/IO/Tty/Tty.so cp Tty.bs blib/arch/auto/IO/Tty/Tty.bs chmod 644 blib/arch/auto/IO/Tty/Tty.bs Manifying blib/man3/IO::Tty::Constant.3 Manifying blib/man3/IO::Tty.3 Manifying blib/man3/IO::Pty.3 [MSG] [Thu Aug 23 13:46:33 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/plu/blead/bin/perl5.9.5 "-Iblib/lib" "-Iblib/arch" test.pl 1..4 Configuration: -DHAVE_GRANTPT -DHAVE_LIBUTIL_H -DHAVE_OPENPTY -DHAVE_PTSNAME -DHAVE_SIGACTION -DHAVE_STRLCPY -DHAVE_TERMIOS_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Checking for appropriate ioctls: TIOCNOTTY TIOCSCTTY Checking that returned fd's don't clash with stdin/out/err... trying openpty()... trying grantpt()... trying unlockpt()... trying ptsname()... trying openpty()... trying grantpt()... ok 1 Checking if child gets pty as controlling terminal... trying unlockpt()... trying ptsname()... trying openpty()... trying grantpt()... ok 2 gimme on /dev/tty: seems OK! back on STDOUT: SEEMS OK! ok 3 Checking basic functionality and how your ptys handle large strings... This test may hang on certain systems, even though it is protected by alarm(). If the counter stops, try Ctrl-C, the test should continue. isatty($master): YES trying unlockpt()... trying ptsname()... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 Good, your raw ptys can handle at least 512 bytes at once. Slave got EOF at line 512, byte 0. isatty($slave): YES Child PID = 32636 ok 4 Passed 4 of 4 tests. [MSG] [Thu Aug 23 13:46:33 2007] Ok, not sending test report [MSG] [Thu Aug 23 13:46:33 2007] cp lib/IO/Pty/Easy.pm blib/lib/IO/Pty/Easy.pm /home/plu/blead/bin/perl5.9.5 "-Iinc" /home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/Makefile.PL --config= --installdeps=IO::Pty,0 Cannot determine perl version info from lib/IO/Pty/Easy.pm Manifying blib/man3/IO::Pty::Easy.3 [ERROR] [Thu Aug 23 13:46:34 2007] MAKE TEST failed: Illegal seek /home/plu/blead/bin/perl5.9.5 "-Iinc" /home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/Makefile.PL --config= --installdeps=IO::Pty,0 Cannot determine perl version info from lib/IO/Pty/Easy.pm PERL_DL_NONLAZY=1 /home/plu/blead/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/000-load.t t/001-open-close.t t/002-spawn.t t/003-subprocess.t t/004-undefined-program.t t/010-read-write.t t/000-load.................ok t/001-open-close...........ok t/002-spawn................Given filehandle is not a tty in clone_winsize_from, called at /usr/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/lib/IO/Pty/Easy.pm line 137 # Failed test 'spawning a subprocess' # at t/002-spawn.t line 9. # Failed test 'subprocess actually exists' # at t/002-spawn.t line 10. Given filehandle is not a tty in clone_winsize_from, called at /usr/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/lib/IO/Pty/Easy.pm line 137 dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/5 tests, 60.00% okay t/003-subprocess...........# Looks like you failed 2 tests of 5. Given filehandle is not a tty in clone_winsize_from, called at /usr/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/lib/IO/Pty/Easy.pm line 137 dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 2 Failed 1/2 tests, 50.00% okay t/004-undefined-program.... # Failed test 'runs subprocess in a pty' # at t/003-subprocess.t line 14. # '' # doesn't match '(?-xism:ok)' # Looks like you failed 1 test of 2. Test output counter mismatch [test 3] # Failed test at t/004-undefined-program.t line 9. # 'Given filehandle is not a tty in clone_winsize_from, called at /usr/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/lib/IO/Pty/Easy.pm line 137 # ' # doesn't match '(?-xism:Cannot exec\(missing_program_io_pty_easy\))' # Failed test 'pty isn't active if program doesn't exist' # at t/004-undefined-program.t line 10. Test output counter mismatch [test 4] # Failed test at t/004-undefined-program.t line 9. # '' # doesn't match '(?-xism:Cannot exec\(missing_program_io_pty_easy\))' # Looks like you failed 1 test of 2. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/2 tests, 50.00% okay t/010-read-write...........Given filehandle is not a tty in clone_winsize_from, called at /usr/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/lib/IO/Pty/Easy.pm line 137 # Failed test 'basic read/write testing' # at t/010-read-write.t line 11. # '' # doesn't match '(?-xism:testing)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/002-spawn.t 2 512 5 2 1-2 t/003-subprocess.t 1 256 2 1 2 t/004-undefined-program.t 1 256 2 1 1 t/010-read-write.t 1 256 1 1 1 Failed 4/6 test scripts. 5/12 subtests failed. Files=6, Tests=12, 0 wallclock secs ( 0.29 cusr + 0.12 csys = 0.41 CPU) Failed 4/6 test programs. 5/12 subtests failed. *** Error code 1 Stop in /usr/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02. [MSG] [Thu Aug 23 13:46:34 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Carp 1.07 0 IO::Pty 1.07 0 Test::More 0.70 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/home/plu/bin:/home/plu/bin:/home/plu/blead/bin PERL5LIB = :/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib/lib:/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib/arch:/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib:/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib/lib:/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib/arch:/home/plu/blead/.cpanplus/5.9.5/build/IO-Tty-1.07/blib:/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/lib:/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib/arch:/home/plu/blead/.cpanplus/5.9.5/build/IO-Pty-Easy-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 31211 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/local/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/plu/blead/bin/perl5.9.5 UID: $< = 1001 EUID: $> = 1001 GID: $( = 1001 1001 1001 0 EGID: $) = 1001 1001 1001 0 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5 patch 31749) configuration: Platform: osname=freebsd, osvers=6.1-release-p6, archname=i386-freebsd-thread-multi uname='freebsd smoker 6.1-release-p6 freebsd 6.1-release-p6 #3: tue sep 12 13:15:56 cest 2006 [EMAIL PROTECTED]:usrobjusrsrcsysgamma i386 ' config_args='-Dprefix=/home/plu/blead' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=undef, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O', cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.4 [FreeBSD] 20050518', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lm -lcrypt perllibs=-lm -lcrypt libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
