This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ASHLEY, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Sep 10 13:07:56 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASHLEY/WWW-Spyder-0.21.tar.gz' [MSG] [Mon Sep 10 13:07:58 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASHLEY/CHECKSUMS' [MSG] [Mon Sep 10 13:07:59 2007] Checksum matches for 'WWW-Spyder-0.21.tar.gz' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/.cvsignore' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/._Changes' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/Changes' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/lib/' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/lib/WWW/' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/lib/WWW/._Spyder.pm' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/lib/WWW/Spyder.pm' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/Makefile.PL' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/MANIFEST' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/META.yml' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/README' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/00.load.t' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/perlcritic.t' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/pod-coverage.t' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/pod.t' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/._test.pl' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW-Spyder-0.21/t/test.pl' [MSG] [Mon Sep 10 13:07:59 2007] Extracted 'WWW::Spyder' to '/home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21' [MSG] [Mon Sep 10 13:08:00 2007] Checking if your kit is complete... Looks good Writing Makefile for WWW::Spyder [MSG] [Mon Sep 10 13:08:00 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Sep 10 13:08:10 2007] cp lib/WWW/Spyder.pm blib/lib/WWW/Spyder.pm cp lib/WWW/._Spyder.pm blib/lib/WWW/._Spyder.pm [ERROR] [Mon Sep 10 13:08:12 2007] MAKE TEST failed: Illegal seek /home/chris/blead/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00.load.........# Testing WWW::Spyder 0.21 ok t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21/blib/lib /home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21/blib/arch /home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21/blib /home/chris/blead/lib/perl5/5.10.0/cygwin-thread-multi-64int /home/chris/blead/lib/perl5/5.10.0/cygwin-thread-multi-64int /home/chris/blead/lib/perl5/5.10.0 /home/chris/blead/lib/perl5/site_perl/5.10.0/cygwin-thread-multi-64int /home/chris/blead/lib/perl5/site_perl/5.10.0/cygwin-thread-multi-64int /home/chris/blead/lib/perl5/site_perl/5.10.0 . /home/chris/blead/lib/perl5/5.10.0/cygwin-thread-multi-64int /home/chris/blead/lib/perl5/5.10.0 /home/chris/blead/lib/perl5/site_perl/5.10.0/cygwin-thread-multi-64int /home/chris/blead/lib/perl5/site_perl/5.10.0 .) at t/perlcritic.t line 3. dubious Test returned status 2 (wstat 512, 0x200) t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/perlcritic.t 2 512 ?? ?? ?? 2 tests skipped. Failed 1/4 test scripts. 0/1 subtests failed. Files=4, Tests=1, 1 wallclock secs ( 0.59 cusr + 0.31 csys = 0.90 CPU) Failed 1/4 test programs. 0/1 subtests failed. [MSG] [Mon Sep 10 13:08:12 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Perl::Critic As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'ASHLEY ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Perl::Critic' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.70 0 version 0.7203 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 COMSPEC = C:\WINDOWS\system32\cmd.exe INCLUDE = C:\mingw\include; LANG = C LIB = C:\mingw\lib; NUMBER_OF_PROCESSORS = 1 PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/Perl/site/bin:/cygdrive/c/Perl/bin:/cygdrive/c/program files/imagemagick-6.3.1-q16:/cygdrive/c/MinGW/dmake:/cygdrive/c/MinGW/bin:/cygdrive/c/MinGW/tools:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/VideoLAN/VLC:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/Program Files/Common Files/GTK/2.0/bin:/cygdrive/c/MinGW/GnuPG:/cygdrive/c/Program Files/jigl:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/Haskell/bin:/cygdrive/c/ghc/ghc-6.6.1/bin PERL5LIB = :/home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21/blib/lib:/home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21/blib/arch:/home/chris/blead/.cpanplus/5.10.0/build/WWW-Spyder-0.21/blib PERL5_CPANPLUS_IS_RUNNING = 1968 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 PROCESSOR_IDENTIFIER = x86 Family 15 Model 4 Stepping 8, AuthenticAMD TERM = cygwin Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/blead/bin/perl.exe UID: $< = 500 EUID: $> = 500 GID: $( = 513 0 513 544 545 EGID: $) = 513 0 513 544 545 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0 patch 31835) configuration: Platform: osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int uname='cygwin_nt-5.2 lapster 1.5.24(0.15642) 2007-01-31 10:57 i686 cygwin ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe', optimize='-O2', cppflags='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe' ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='g++', ldflags =' -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib' libpth=/usr/local/lib /usr/lib /lib libs=-lgdbm -ldl -lcrypt -lgdbm_compat perllibs=-ldl -lcrypt -lgdbm_compat libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' -s' cccdlflags=' ', lddlflags=' --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib'
