This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Chris Mungall, This is a computer-generated test report for DBIx-DBStag-0.09, created automatically by CPAN::Reporter, version 0.99_10, and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. Sections of this report: * Tester comments * Prerequisites * Environment and other context * Test output ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 25756 PERL5_CPAN_IS_EXECUTING = /home/sand/.cpan/build/DBIx-DBStag-0.09-eabqhM/Makefile.PL PERL5_CPAN_IS_RUNNING = 25756 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/bin/perl UID: $< = 1005 EUID: $> = 1005 GID: $( = 1005 1005 EGID: $) = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.91_53 Cwd 3.25 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.36 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 2.99_02 Test::More 0.70 YAML 0.65 YAML::Syck 0.97 version 0.7203 ------------------------------ TEST OUTPUT ------------------------------ Output from '/home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/bin/perl Makefile.PL': Warning: prerequisite DBIx::DBSchema 0.34 not found. Warning: prerequisite Data::Stag 0.07 not found. I will use the following settings for compiling and testing: testdriver (default) = Pg testdsn (default) = dbi:Pg:dbname=test testhost (default) = testpassword (default) = testrecreate (default) = dropdb test; createdb test testuser (default) = To change these settings, see 'perl Makefile.PL --help'. Checking if your kit is complete... Looks good Writing Makefile for DBIx You are missing a required module! Can't locate Data/Stag.pm in @INC (@INC contains: t . /home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/lib/5.8.7/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/lib/5.8.7 /home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/lib/site_perl/5.8.7/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/lib/site_perl/5.8.7 /home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED]/lib/site_perl) at DBIx/DBStag.pm line 19. BEGIN failed--compilation aborted at DBIx/DBStag.pm line 19. Compilation failed in require at t/DBStagTest.pm line 4. BEGIN failed--compilation aborted at t/DBStagTest.pm line 4. Compilation failed in require at Makefile.PL line 153. Exiting! -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=linux, osvers=2.6.14, archname=i686-linux-thread-multi-64int uname='linux k75 2.6.14 #1 fri jan 27 16:22:47 cet 2006 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pybSSNM/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Duse64bitint -Dusedevel -Dusethreads' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.3 20060115 (prerelease) (Debian 4.0.2-7)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
