This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear EESTABROO, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Sep 12 12:39:29 2007] Trying to get 'http://www.cpan.org/authors/id/E/EE/EESTABROO/Passwd-Linux-1.2.tar.gz' [MSG] [Wed Sep 12 12:39:29 2007] Trying to get 'http://www.cpan.org/authors/id/E/EE/EESTABROO/CHECKSUMS' [MSG] [Wed Sep 12 12:39:30 2007] Checksum matches for 'Passwd-Linux-1.2.tar.gz' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/Linux.pm' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/MANIFEST' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/Linux.xs' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/test.pl' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/Changes' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/Makefile.PL' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd-Linux-1.2/META.yml' [MSG] [Wed Sep 12 12:39:30 2007] Extracted 'Passwd::Linux' to '/home/chris/blead/.cpanplus/5.10.0/build/Passwd-Linux-1.2' [MSG] [Wed Sep 12 12:39:31 2007] Checking if your kit is complete... Looks good Writing Makefile for Passwd::Linux [MSG] [Wed Sep 12 12:39:31 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Sep 12 12:39:36 2007] cp Linux.pm blib/lib/Passwd/Linux.pm /home/chris/blead/bin/perl /home/chris/blead/lib/perl5/5.10.0/ExtUtils/xsubpp -typemap /home/chris/blead/lib/perl5/5.10.0/ExtUtils/typemap Linux.xs > Linux.xsc && mv Linux.xsc Linux.c Please specify prototyping behavior for Linux.xs (see perlxs manual) cc -c -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -DVERSION=\"1.2\" -DXS_VERSION=\"1.2\" -fPIC "-I/home/chris/blead/lib/perl5/5.10.0/alpha-linux-thread-multi/CORE" Linux.c Running Mkbootstrap for Passwd::Linux () chmod 644 Linux.bs rm -f blib/arch/auto/Passwd/Linux/Linux.so cc -shared -O2 -L/usr/local/lib Linux.o -o blib/arch/auto/Passwd/Linux/Linux.so \ \ chmod 755 blib/arch/auto/Passwd/Linux/Linux.so cp Linux.bs blib/arch/auto/Passwd/Linux/Linux.bs chmod 644 blib/arch/auto/Passwd/Linux/Linux.bs Manifying blib/man3/Passwd::Linux.3 [ERROR] [Wed Sep 12 12:39:36 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/blead/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..5 ok 1 Couldn't get lock on password files (are you root?) at test.pl line 33 [MSG] [Wed Sep 12 12:39:36 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/alpha-unknown-linux-gnu/gcc-bin/3.4.6 PERL5LIB = :/home/chris/blead/.cpanplus/5.10.0/build/Passwd-Linux-1.2/blib/lib:/home/chris/blead/.cpanplus/5.10.0/build/Passwd-Linux-1.2/blib/arch:/home/chris/blead/.cpanplus/5.10.0/build/Passwd-Linux-1.2/blib PERL5_CPANPLUS_IS_RUNNING = 17962 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/blead/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 1000 10 100 1000 EGID: $) = 1000 10 100 1000 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0 patch 31843) configuration: Platform: osname=linux, osvers=2.6.16.19, archname=alpha-linux-thread-multi uname='linux alpha 2.6.16.19 #1 sat apr 14 14:47:44 bst 2007 alpha ev6 tsunami gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/include/gdbm' ccversion='', gccversion='3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.10)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
