This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear IWADE, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Sep 15 09:01:33 2007] Trying to get 'http://www.cpan.org/authors/id/I/IW/IWADE/CHECKSUMS' [MSG] [Sat Sep 15 09:01:34 2007] Checksum matches for 'Apache2-S3-0.03.tar.gz' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/META.yml' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/README' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/lib/' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/lib/Apache2/' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/lib/Apache2/S3.pm' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/MANIFEST' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/Makefile.PL' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/Changes' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/t/' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2-S3-0.03/t/Apache2-S3.t' [MSG] [Sat Sep 15 09:01:34 2007] Extracted 'Apache2::S3' to '/home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03' [MSG] [Sat Sep 15 09:01:36 2007] Checking if your kit is complete... Looks good Warning: prerequisite Digest::HMAC 0 not found. Warning: prerequisite Digest::SHA1 0 not found. Writing Makefile for Apache2::S3 [MSG] [Sat Sep 15 09:01:36 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Sep 15 09:01:36 2007] Module 'Apache2::S3' requires 'Digest::HMAC' version '0' to be installed [MSG] [Sat Sep 15 09:01:36 2007] Module 'Apache2::S3' requires 'Digest::SHA1' version '0' to be installed [MSG] [Sat Sep 15 09:01:36 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS' [MSG] [Sat Sep 15 09:01:37 2007] Checksum matches for 'Digest-HMAC-1.01.tar.gz' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/rfc2104.txt' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/Makefile.PL' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/lib/' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC.pm' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC_SHA1.pm' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC_MD5.pm' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/Changes' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/t/' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/t/rfc2202.t' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/README' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest-HMAC-1.01/MANIFEST' [MSG] [Sat Sep 15 09:01:38 2007] Extracted 'Digest::HMAC' to '/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01' [MSG] [Sat Sep 15 09:01:39 2007] Warning: prerequisite Digest::SHA1 1 not found. Writing Makefile for Digest::HMAC [MSG] [Sat Sep 15 09:01:39 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Sep 15 09:01:40 2007] Module 'Digest::HMAC' requires 'Digest::SHA1' version '1' to be installed [MSG] [Sat Sep 15 09:01:40 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS' [MSG] [Sat Sep 15 09:01:42 2007] Checksum matches for 'Digest-SHA1-2.11.tar.gz' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/README' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/t/' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/t/bits.t' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/t/badfile.t' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/t/sha1.t' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/MANIFEST' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/fip180-1.html' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/SHA1.pm' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/typemap' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/fip180-1.gif' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/Changes' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/Makefile.PL' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest-SHA1-2.11/SHA1.xs' [MSG] [Sat Sep 15 09:01:43 2007] Extracted 'Digest::SHA1' to '/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11' [MSG] [Sat Sep 15 09:01:45 2007] Writing Makefile for Digest::SHA1 [MSG] [Sat Sep 15 09:01:45 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Sep 15 09:01:55 2007] cc -c -pthread -fno-strict-aliasing -pipe -I/usr/local/include -O2 -DVERSION=\"2.11\" -DXS_VERSION=\"2.11\" -DPIC -fPIC "-I/home/chris/perl595/lib/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int/CORE" SHA1.c SHA1.xs: In function `XS_Digest__SHA1_clone': SHA1.xs:488: warning: initialization discards qualifiers from pointer target type Running Mkbootstrap for Digest::SHA1 () chmod 644 SHA1.bs rm -f blib/arch/auto/Digest/SHA1/SHA1.so cc -shared -fPIC -L/usr/local/lib SHA1.o -o blib/arch/auto/Digest/SHA1/SHA1.so chmod 755 blib/arch/auto/Digest/SHA1/SHA1.so cp SHA1.bs blib/arch/auto/Digest/SHA1/SHA1.bs chmod 644 blib/arch/auto/Digest/SHA1/SHA1.bs Manifying blib/man3/Digest::SHA1.3 [MSG] [Sat Sep 15 09:01:56 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/badfile....ok t/bits.......ok t/sha1.......ok All tests successful. Files=3, Tests=17, 0 wallclock secs ( 0.23 cusr + 0.35 csys = 0.58 CPU) [MSG] [Sat Sep 15 09:01:56 2007] Ok, not sending test report [MSG] [Sat Sep 15 09:01:57 2007] Manifying blib/man3/Digest::HMAC_MD5.3 Manifying blib/man3/Digest::HMAC.3 Manifying blib/man3/Digest::HMAC_SHA1.3 [MSG] [Sat Sep 15 09:01:59 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/rfc2202....ok All tests successful. Files=1, Tests=14, 1 wallclock secs ( 0.07 cusr + 0.18 csys = 0.25 CPU) [MSG] [Sat Sep 15 09:01:59 2007] Ok, not sending test report [MSG] [Sat Sep 15 09:02:02 2007] cp lib/Apache2/S3.pm blib/lib/Apache2/S3.pm Manifying blib/man3/Apache2::S3.3 [ERROR] [Sat Sep 15 09:02:04 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Apache2-S3....Can't locate Apache2/Const.pm in @INC (@INC contains: /home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib/lib /home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib/arch /home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/lib /home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/arch /home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib /home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/lib /home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/arch /home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib /home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib /home/chris/perl595/lib/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl595/lib/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl595/lib/5.9.5 /home/chris/perl595/lib/site_perl/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl595/lib/site_perl/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl595/lib/site_perl/5.9.5 . /home/chris/perl595/lib/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl595/lib/5.9.5 /home/chris/perl595/lib/site_perl/5.9.5/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl595/lib/site_perl/5.9.5 .) at /home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib/lib/Apache2/S3.pm line 6. BEGIN failed--compilation aborted at /home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib/lib/Apache2/S3.pm line 6. Compilation failed in require at t/Apache2-S3.t line 10. BEGIN failed--compilation aborted at t/Apache2-S3.t line 10. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Apache2-S3.t 2 512 1 2 1 Failed 1/1 test scripts. 1/1 subtests failed. Files=1, Tests=1, 1 wallclock secs ( 0.05 cusr + 0.23 csys = 0.28 CPU) Failed 1/1 test programs. 1/1 subtests failed. *** Error code 2 Stop in /home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03 (line 763 of Makefile). [MSG] [Sat Sep 15 09:02:04 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Apache2::Const As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'IWADE ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Apache2::Const' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Digest::HMAC 1.01 0 Digest::SHA1 2.11 0 MIME::Base64 3.07_01 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/lib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/arch:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/lib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/arch:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/lib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/arch:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/lib:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/arch:/home/chris/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib:/home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib/lib:/home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib/arch:/home/chris/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.03/blib PERL5_CPANPLUS_IS_RUNNING = 2270 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl595/bin/perl5.9.5 UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 10 0 EGID: $) = 10 10 0 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5) configuration: Platform: osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi-64int uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O2', cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
