This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear IWADE, This is a computer-generated error report created automatically by CPANPLUS, version 0.81_01. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Sep 17 07:10:28 2007] Trying to get 'http://www.cpan.org/authors/id/I/IW/IWADE/Apache2-S3-0.01.tar.gz' [MSG] [Mon Sep 17 07:10:29 2007] Trying to get 'http://www.cpan.org/authors/id/I/IW/IWADE/CHECKSUMS' [MSG] [Mon Sep 17 07:10:30 2007] Checksum matches for 'Apache2-S3-0.01.tar.gz' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/META.yml' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/README' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/lib/' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/lib/Apache2/' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/lib/Apache2/S3.pm' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/MANIFEST' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/Makefile.PL' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/Changes' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/t/' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2-S3-0.01/t/Apache2-S3.t' [MSG] [Mon Sep 17 07:10:30 2007] Extracted 'Apache2::S3' to '/home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01' [MSG] [Mon Sep 17 07:10:31 2007] Checking if your kit is complete... Looks good Warning: prerequisite Digest::HMAC 0 not found. Warning: prerequisite Digest::SHA1 0 not found. Writing Makefile for Apache2::S3 [MSG] [Mon Sep 17 07:10:31 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Sep 17 07:10:31 2007] Module 'Apache2::S3' requires 'Digest::HMAC' version '0' to be installed [MSG] [Mon Sep 17 07:10:31 2007] Module 'Apache2::S3' requires 'Digest::SHA1' version '0' to be installed [MSG] [Mon Sep 17 07:10:31 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS' [MSG] [Mon Sep 17 07:10:32 2007] Checksum matches for 'Digest-HMAC-1.01.tar.gz' [MSG] [Mon Sep 17 07:10:32 2007] Extracted 'Digest-HMAC-1.01/' [MSG] [Mon Sep 17 07:10:32 2007] Extracted 'Digest-HMAC-1.01/rfc2104.txt' [MSG] [Mon Sep 17 07:10:32 2007] Extracted 'Digest-HMAC-1.01/Makefile.PL' [MSG] [Mon Sep 17 07:10:32 2007] Extracted 'Digest-HMAC-1.01/lib/' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC.pm' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC_SHA1.pm' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC_MD5.pm' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/Changes' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/t/' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/t/rfc2202.t' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/README' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest-HMAC-1.01/MANIFEST' [MSG] [Mon Sep 17 07:10:33 2007] Extracted 'Digest::HMAC' to '/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01' [MSG] [Mon Sep 17 07:10:33 2007] Warning: prerequisite Digest::SHA1 1 not found. Writing Makefile for Digest::HMAC [MSG] [Mon Sep 17 07:10:33 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Sep 17 07:10:33 2007] Module 'Digest::HMAC' requires 'Digest::SHA1' version '1' to be installed [MSG] [Mon Sep 17 07:10:33 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS' [MSG] [Mon Sep 17 07:10:35 2007] Checksum matches for 'Digest-SHA1-2.11.tar.gz' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/README' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/t/' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/t/bits.t' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/t/badfile.t' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/t/sha1.t' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/MANIFEST' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/fip180-1.html' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/SHA1.pm' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/typemap' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/fip180-1.gif' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/Changes' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/Makefile.PL' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest-SHA1-2.11/SHA1.xs' [MSG] [Mon Sep 17 07:10:35 2007] Extracted 'Digest::SHA1' to '/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11' [MSG] [Mon Sep 17 07:10:36 2007] Writing Makefile for Digest::SHA1 [MSG] [Mon Sep 17 07:10:36 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Sep 17 07:10:42 2007] cc -c -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"2.11\" -DXS_VERSION=\"2.11\" -fPIC "-I/home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int/CORE" SHA1.c SHA1.xs: In function 'XS_Digest__SHA1_clone': SHA1.xs:488: warning: initialization discards qualifiers from pointer target type Running Mkbootstrap for Digest::SHA1 () chmod 644 SHA1.bs rm -f blib/arch/auto/Digest/SHA1/SHA1.so cc -shared -O2 -L/usr/local/lib SHA1.o -o blib/arch/auto/Digest/SHA1/SHA1.so \ \ chmod 755 blib/arch/auto/Digest/SHA1/SHA1.so cp SHA1.bs blib/arch/auto/Digest/SHA1/SHA1.bs chmod 644 blib/arch/auto/Digest/SHA1/SHA1.bs Manifying blib/man3/Digest::SHA1.3 [MSG] [Mon Sep 17 07:10:43 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/badfile....ok t/bits.......ok t/sha1.......ok All tests successful. Files=3, Tests=17, 0 wallclock secs ( 0.16 cusr + 0.05 csys = 0.21 CPU) [MSG] [Mon Sep 17 07:10:43 2007] Ok, not sending test report [MSG] [Mon Sep 17 07:10:44 2007] Manifying blib/man3/Digest::HMAC_MD5.3 Manifying blib/man3/Digest::HMAC.3 Manifying blib/man3/Digest::HMAC_SHA1.3 [MSG] [Mon Sep 17 07:10:44 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/rfc2202....ok All tests successful. Files=1, Tests=14, 0 wallclock secs ( 0.08 cusr + 0.01 csys = 0.09 CPU) [MSG] [Mon Sep 17 07:10:44 2007] Ok, not sending test report [MSG] [Mon Sep 17 07:10:46 2007] cp lib/Apache2/S3.pm blib/lib/Apache2/S3.pm Manifying blib/man3/Apache2::S3.3 [ERROR] [Mon Sep 17 07:10:47 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Apache2-S3....Can't locate Apache2/Const.pm in @INC (@INC contains: /home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib/lib /home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib/arch /home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/lib /home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/arch /home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib /home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/lib /home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/arch /home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib /home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib /home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/5.9.5 /home/cpan/perl595/lib/site_perl/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/site_perl/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/site_perl/5.9.5 . /home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/5.9.5 /home/cpan/perl595/lib/site_perl/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/site_perl/5.9.5 .) at /home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib/lib/Apache2/S3.pm line 6. BEGIN failed--compilation aborted at /home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib/lib/Apache2/S3.pm line 6. Compilation failed in require at t/Apache2-S3.t line 10. BEGIN failed--compilation aborted at t/Apache2-S3.t line 10. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/Apache2-S3.t 2 512 1 2 1 Failed 1/1 test scripts. 1/1 subtests failed. Files=1, Tests=1, 0 wallclock secs ( 0.05 cusr + 0.03 csys = 0.08 CPU) Failed 1/1 test programs. 1/1 subtests failed. make: *** [test_dynamic] Error 2 [MSG] [Mon Sep 17 07:10:47 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Apache2::Const As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'IWADE ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Apache2::Const' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Digest::HMAC 1.01 0 Digest::SHA1 2.11 0 MIME::Base64 3.07_01 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-SHA1-2.11/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Digest-HMAC-1.01/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Apache2-S3-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 12254 PERL5_CPANPLUS_IS_VERSION = 0.81_01 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl595/bin/perl5.9.5 UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 11 17 18 19 83 100 EGID: $) = 100 11 17 18 19 83 100 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
