This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MRANDALL, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Sep 20 12:15:55 2007] Trying to get 'http://www.cpan.org/authors/id/M/MR/MRANDALL/CHECKSUMS' [MSG] [Thu Sep 20 12:15:56 2007] Checksum matches for 'HTML-Debug-0.10.tar.gz' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/Debug.pm' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/Changes' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/MANIFEST' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/Makefile.PL' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/test.pl' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML-Debug-0.10/README' [MSG] [Thu Sep 20 12:15:56 2007] Extracted 'HTML::Debug' to '/home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10' [MSG] [Thu Sep 20 12:15:57 2007] Checking if your kit is complete... Looks good Writing Makefile for HTML::Debug [MSG] [Thu Sep 20 12:15:57 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Sep 20 12:15:58 2007] cp Debug.pm blib/lib/HTML/Debug.pm Manifying blib/man3/HTML::Debug.3 [ERROR] [Thu Sep 20 12:15:59 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/blead/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl 1..1 Can't locate DBI.pm in @INC (@INC contains: blib/lib blib/arch /home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10/blib/lib /home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10/blib/arch /home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10/blib /home/cpan/blead/lib/perl5/5.10.0/i686-linux-thread-multi-64int /home/cpan/blead/lib/perl5/5.10.0 /home/cpan/blead/lib/perl5/site_perl/5.10.0/i686-linux-thread-multi-64int /home/cpan/blead/lib/perl5/site_perl/5.10.0 .) at blib/lib/HTML/Debug.pm line 4. BEGIN failed--compilation aborted at blib/lib/HTML/Debug.pm line 4. Compilation failed in require at test.pl line 11. BEGIN failed--compilation aborted at test.pl line 11. not ok 1 make: *** [test_dynamic] Error 2 [MSG] [Thu Sep 20 12:15:59 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: DBI As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'MRANDALL ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'DBI' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_GB.UTF-8 PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin PERL5LIB = :/home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10/blib/lib:/home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10/blib/arch:/home/cpan/blead/.cpanplus/5.10.0/build/HTML-Debug-0.10/blib PERL5_CPANPLUS_IS_RUNNING = 5256 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/blead/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0 patch 31906) configuration: Platform: osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
