This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear DAVIDNICO,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Sep 24 10:55:43 2007] Trying to get 
'http://www.cpan.org/authors/id/D/DA/DAVIDNICO/DirDB/DirDB-FTP-0.03.tar.gz'
[MSG] [Mon Sep 24 10:55:43 2007] Trying to get 
'http://www.cpan.org/authors/id/D/DA/DAVIDNICO/DirDB/CHECKSUMS'
[MSG] [Mon Sep 24 10:55:44 2007] Checksum matches for 'DirDB-FTP-0.03.tar.gz'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03/MANIFEST'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03/test.pl'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03/FTP.pm'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03/README'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03/Makefile.PL'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB-FTP-0.03/META.yml'
[MSG] [Mon Sep 24 10:55:44 2007] Extracted 'DirDB::FTP' to 
'/home/chris/.cpanplus/5.8.8/build/DirDB-FTP-0.03'
[MSG] [Mon Sep 24 10:55:45 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Net::FTP::blat 0.02 not found.
Writing Makefile for DirDB::FTP

[MSG] [Mon Sep 24 10:55:45 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Sep 24 10:55:45 2007] Module 'DirDB::FTP' requires 'Net::FTP::blat' 
version '0.02' to be installed 
[MSG] [Mon Sep 24 10:55:45 2007] Trying to get 
'http://www.cpan.org/authors/id/D/DA/DAVIDNICO/Net-FTP-blat-0.02.tar.gz'
[MSG] [Mon Sep 24 10:55:46 2007] Trying to get 
'http://www.cpan.org/authors/id/D/DA/DAVIDNICO/CHECKSUMS'
[MSG] [Mon Sep 24 10:55:46 2007] Checksum matches for 'Net-FTP-blat-0.02.tar.gz'
[MSG] [Mon Sep 24 10:55:46 2007] Extracted 'Net-FTP-blat-0.02/'
[MSG] [Mon Sep 24 10:55:46 2007] Extracted 'Net-FTP-blat-0.02/README'
[MSG] [Mon Sep 24 10:55:46 2007] Extracted 'Net-FTP-blat-0.02/Makefile.PL'
[MSG] [Mon Sep 24 10:55:47 2007] Extracted 'Net-FTP-blat-0.02/Changes'
[MSG] [Mon Sep 24 10:55:47 2007] Extracted 'Net-FTP-blat-0.02/MANIFEST'
[MSG] [Mon Sep 24 10:55:47 2007] Extracted 'Net-FTP-blat-0.02/test.pl'
[MSG] [Mon Sep 24 10:55:47 2007] Extracted 'Net-FTP-blat-0.02/blat.pm'
[MSG] [Mon Sep 24 10:55:47 2007] Extracted 'Net::FTP::blat' to 
'/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02'
[MSG] [Mon Sep 24 10:55:48 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Net::FTP::blat

[MSG] [Mon Sep 24 10:55:48 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 
'sub return value'
[MSG] [Mon Sep 24 10:55:50 2007] cp blat.pm blib/lib/Net/FTP/blat.pm
Manifying blib/man3/Net::FTP::blat.3

[MSG] [Mon Sep 24 10:56:07 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 
/home/chris/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..11
# Running under perl version 5.008008 for linux
# Current time local: Mon Sep 24 10:55:50 2007
# Current time GMT:   Mon Sep 24 09:55:50 2007
# Using Test.pm version 1.25
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
cleanup
ok 10
ok 11

[MSG] [Mon Sep 24 10:56:08 2007] Successfully sent 'pass' report for 
'Net-FTP-blat-0.02'
[MSG] [Mon Sep 24 10:56:10 2007] cp FTP.pm blib/lib/DirDB/FTP.pm
Manifying blib/man3/DirDB::FTP.3

[ERROR] [Mon Sep 24 10:56:13 2007] MAKE TEST failed: Illegal seek 
PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-Iblib/lib" "-Iblib/arch" 
test.pl
1..14
# Running under perl version 5.008008 for linux
# Current time local: Mon Sep 24 10:56:10 2007
# Current time GMT:   Mon Sep 24 09:56:10 2007
# Using Test.pm version 1.25
ok 1
ok 2
ok 3
Can't use an undefined value as a symbol reference at 
/home/chris/perl588/lib/5.8.8/Net/FTP/dataconn.pm line 54.
make: *** [test_dynamic] Error 255

[MSG] [Mon Sep 24 10:56:13 2007] DEFAULT 'proceed_on_test_failure' HANDLER 
RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
          Module Name                        Have     Want
          Net::FTP::blat                     0.02     0.02

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = 
/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/alpha-unknown-linux-gnu/gcc-bin/3.4.6
    PERL5LIB = 
:/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02/blib:/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Net-FTP-blat-0.02/blib:/home/chris/.cpanplus/5.8.8/build/DirDB-FTP-0.03/blib/lib:/home/chris/.cpanplus/5.8.8/build/DirDB-FTP-0.03/blib/arch:/home/chris/.cpanplus/5.8.8/build/DirDB-FTP-0.03/blib
    PERL5_CPANPLUS_IS_RUNNING = 3413
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 1000 100 10
    EGID: $)  = 1000 1000 100 10


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.19, archname=alpha-linux-thread-multi
    uname='linux alpha 2.6.16.19 #1 sat apr 14 14:47:44 bst 2007 alpha ev6 
tsunami gnulinux '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/include/gdbm'
    ccversion='', gccversion='3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, 
pie-8.7.10)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=8, nvtype='long double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Reply via email to