This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MIKEM, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Sep 25 02:43:05 2007] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIKEM/Authen-TacacsPlus/Authen-TacacsPlus-0.17.tar.gz' [MSG] [Tue Sep 25 02:43:07 2007] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIKEM/Authen-TacacsPlus/CHECKSUMS' [MSG] [Tue Sep 25 02:43:08 2007] Checksum matches for 'Authen-TacacsPlus-0.17.tar.gz' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/README' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/Changes' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/TacacsPlus.pm' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/TacacsPlus.xs' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/test.pl' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/Makefile.PL' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/META.yml' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/expire.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/md5.c' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/md5.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/regmagic.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/tac_plus.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/encrypt.c' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/tacplus_client.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/Makefile.PL' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/tac_client.c' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/utils.c' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/parse.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/tacpluslib/regexp.h' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen-TacacsPlus-0.17/MANIFEST' [MSG] [Tue Sep 25 02:43:08 2007] Extracted 'Authen::TacacsPlus' to '/opt/perl/testers/.cpanplus/5.8.8/build/Authen-TacacsPlus-0.17' [MSG] [Tue Sep 25 02:43:09 2007] Checking if your kit is complete... Looks good MakeMaker (v6.36) Writing Makefile for Authen::TacacsPlus::tacplus Writing Makefile for Authen::TacacsPlus [MSG] [Tue Sep 25 02:43:09 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Sep 25 02:43:12 2007] cp TacacsPlus.pm blib/lib/Authen/TacacsPlus.pm Please specify prototyping behavior for TacacsPlus.xs (see perlxs manual) Running Mkbootstrap for Authen::TacacsPlus () Manifying blib/man3/Authen::TacacsPlus.3 [ERROR] [Tue Sep 25 02:43:14 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: *** No rule to make target `pure_all', needed by `test_dynamic'. Stop. make: *** [subdirs-test] Error 2 make: *** Waiting for unfinished jobs.... 1..7 ok 1 Could not connect to TACACSPLUS Host : *Authen::TacacsPlus::errmsg not ok 2 Can't call method "authen" on an undefined value at test.pl line 48. make: *** [test_dynamic] Error 22 [MSG] [Tue Sep 25 02:43:14 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.20.12, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.20.12 #1 smp tue may 29 03:43:47 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
