This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Chintana Wilamuna,
    
This is a computer-generated report for WSO2-WSF-Perl-v1.0.0
on perl-5.6.2, created automatically by CPAN-Reporter-0.99_13 
and sent to the CPAN Testers mailing list.  

If you have received this email directly, it is because the person testing 
your distribution chose to send a copy to your CPAN email address; there 
may be a delay before the official report is received and processed 
by CPAN Testers.

Thank you for uploading your work to CPAN.  While attempting to build or test 
this distribution, the distribution signaled that support is not available 
either for this operating system or this version of Perl.  Nevertheless, any 
diagnostic output produced is provided below for reference.

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

[none provided]

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/local/perl-5.6.2/bin/perl Makefile.PL':

Checking if your kit is complete...
Warning: the following files are missing in your kit:
        WSO2-WSF/Changes
        WSO2-WSF/MANIFEST
        WSO2-WSF/README
Please inform the author.
Note (probably harmless): No library found for -laxutil
Note (probably harmless): No library found for -laxis2_minizip
Note (probably harmless): No library found for -laxis2_parser
Note (probably harmless): No library found for -laxis2_libxml2
Note (probably harmless): No library found for -laxis2_axiom
Note (probably harmless): No library found for -laxis2_engine
Note (probably harmless): No library found for -laxis2_http_common
Note (probably harmless): No library found for -laxis2_http_sender
Note (probably harmless): No library found for -laxis2_http_receiver
ERROR from evaluation of 
/home/sand/.cpan/build/WSO2-WSF-Perl-1.0.0-sZZaGu/WSO2-WSF/Makefile.PL: Perl 
v5.8.8 required--this is only v5.6.2, stopped at ./Makefile.PL line 1.
BEGIN failed--compilation aborted at ./Makefile.PL line 1.

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = C
    PATH = 
/usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5_CPANPLUS_IS_RUNNING = 27589
    PERL5_CPAN_IS_EXECUTING = 
/home/sand/.cpan/build/WSO2-WSF-Perl-1.0.0-sZZaGu/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 27589
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /usr/local/perl-5.6.2/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have  
    ------------------- ------
    CPAN                1.9203
    Cwd                 3.25  
    ExtUtils::CBuilder  0.19  
    ExtUtils::Command   1.13  
    ExtUtils::Install   1.44  
    ExtUtils::MakeMaker 6.36  
    ExtUtils::Manifest  1.51  
    ExtUtils::ParseXS   2.18  
    File::Spec          3.25  
    Module::Build       0.2808
    Module::Signature   0.55  
    Test::Harness       2.64  
    Test::More          0.72  
    YAML                n/a   
    YAML::Syck          0.85  
    version             0.73  


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=linux, osvers=2.6.16-2-k7, archname=i686-linux-64int
    uname='linux k75 2.6.16-2-k7 #2 mon may 22 23:23:54 utc 2006 i686 gnulinux '
    config_args='-Dprefix=/usr/local/perl-5.6.2 -Dinstallusrbinperl=n 
-Uversiononly -Doptimize=-g -es -Duse64bitint -Dusedevel -des'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef 
usemultiplicity=undef
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include 
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g',
    cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.4 20060507 (prerelease) (Debian 4.0.3-3)', 
gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil
    perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Reply via email to