This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Rob Kinyon, This is a computer-generated report for DBM-Deep-1.0000 on perl-5.10.0, created automatically by CPAN-Reporter-0.99_14 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_basic......................# Testing DBM::Deep against Perl 5.010000 located at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/bin/perl ok t/02_hash.......................ok t/03_bighash....................skipped all skipped: You must set $ENV{LONG_TESTS} to run the long tests t/04_array......................ok t/05_bigarray...................skipped all skipped: You must set $ENV{LONG_TESTS} to run the long tests t/06_error......................ok t/07_locking....................ok t/08_deephash...................skipped all skipped: You must set $ENV{LONG_TESTS} to run the long tests t/09_deeparray..................skipped all skipped: You must set $ENV{LONG_TESTS} to run the long tests t/10_largekeys..................ok t/11_optimize...................ok t/12_clone......................ok t/13_setpack....................ok 3/10 skipped: various reasons t/14_filter.....................ok t/15_digest.....................ok t/16_circular...................skipped all skipped: Internal references are not supported right now t/17_import.....................DBM::Deep: Cannot store something that is tied. # Looks like you planned 11 tests but only ran 6. # Looks like your test died just after 6. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 7-11 Failed 5/11 tests, 54.55% okay t/18_export.....................DBM::Deep: Cannot store something that is tied. # Looks like you planned 6 tests but only ran 1. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 2-6 Failed 5/6 tests, 16.67% okay t/19_crossref...................ok t/20_tie........................ok t/21_tie_access.................ok t/22_internal_copy..............skipped all skipped: Internal references are not supported right now t/23_misc.......................ok t/24_autobless..................ok t/25_tie_return_value...........ok t/26_scalar_ref.................ok t/27_filehandle.................ok t/28_index_sector...............ok t/29_largedata..................ok t/30_already_tied...............ok t/31_references.................ok 1/16 skipped: various reasons t/32_dash_ell...................ok t/33_transactions...............ok t/34_transaction_arrays.........ok t/35_transaction_multiple.......ok t/37_delete_edge_cases..........ok t/38_data_sector_size...........ok t/39_singletons.................ok t/40_freespace..................ok t/41_transaction_multilevel.....ok t/42_transaction_indexsector....ok t/43_transaction_maximum........ok t/44_upgrade_db................. # Failed test 'Failed no params' # at t/44_upgrade_db.t line 27. # got: 'Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. # Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # Compilation failed in require at utils/upgrade_db.pl line 8. # BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # ' # expected: 'Missing required parameters. # Usage: # upgrade_db.pl -input <oldfile> -output <newfile> # # Options: # -input (required) # This is the name of original DB file. # # -output (required) # This is the name of target output DB file. # # -version # Optionally, you can specify the version of DBM::Deep for the output # file. This can either be an upgrade or a downgrade. The minimum # version supported is 0.91. # # If the version is the same as the input file, this acts like a # compressed copy of the database. # # -autobless # In pre-1.0000 versions, autoblessing was an optional setting. This # defaults to false. # # -help # Prints a brief help message, then exits. # # -man # Prints a much longer message, then exits; # # ' # Failed test 'Failed only -input' # at t/44_upgrade_db.t line 28. # got: 'Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. # Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # Compilation failed in require at utils/upgrade_db.pl line 8. # BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # ' # expected: 'Missing required parameters. # Usage: # upgrade_db.pl -input <oldfile> -output <newfile> # # Options: # -input (required) # This is the name of original DB file. # # -output (required) # This is the name of target output DB file. # # -version # Optionally, you can specify the version of DBM::Deep for the output # file. This can either be an upgrade or a downgrade. The minimum # version supported is 0.91. # # If the version is the same as the input file, this acts like a # compressed copy of the database. # # -autobless # In pre-1.0000 versions, autoblessing was an optional setting. This # defaults to false. # # -help # Prints a brief help message, then exits. # # -man # Prints a much longer message, then exits; # # ' # Failed test 'Failed only -output' # at t/44_upgrade_db.t line 29. # got: 'Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. # Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # Compilation failed in require at utils/upgrade_db.pl line 8. # BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # ' # expected: 'Missing required parameters. # Usage: # upgrade_db.pl -input <oldfile> -output <newfile> # # Options: # -input (required) # This is the name of original DB file. # # -output (required) # This is the name of target output DB file. # # -version # Optionally, you can specify the version of DBM::Deep for the output # file. This can either be an upgrade or a downgrade. The minimum # version supported is 0.91. # # If the version is the same as the input file, this acts like a # compressed copy of the database. # # -autobless # In pre-1.0000 versions, autoblessing was an optional setting. This # defaults to false. # # -help # Prints a brief help message, then exits. # # -man # Prints a much longer message, then exits; # # ' # Failed test 'Failed same name' # at t/44_upgrade_db.t line 30. # got: 'Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. # Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # Compilation failed in require at utils/upgrade_db.pl line 8. # BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # ' # expected: 'Cannot use the same filename for both input and output. # Usage: # upgrade_db.pl -input <oldfile> -output <newfile> # # ' # Failed test 'Failed input does not exist' # at t/44_upgrade_db.t line 36. # got: 'Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. # Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # Compilation failed in require at utils/upgrade_db.pl line 8. # BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # ' # expected: ''foo' is not a file. # Usage: # upgrade_db.pl -input <oldfile> -output <newfile> # # ' # Failed test 'Input is not a DBM::Deep file' # at t/44_upgrade_db.t line 45. # got: 'Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. # Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. # Compilation failed in require at utils/upgrade_db.pl line 8. # BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # ' # expected: ''/tmp/iT6v4GLB0G/tmpJaC9' is not a DBM::Deep file. # Usage: # upgrade_db.pl -input <oldfile> -output <newfile> # # ' # Failed test 'A successful run produces no output' # at t/44_upgrade_db.t line 104. Perl lib version (5.10.0) doesn't match executable version (v5.8.8) at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/i686-linux/Config.pm line 46. Compilation failed in require at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. BEGIN failed--compilation aborted at /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/lib/5.10.0/FindBin.pm line 99. Compilation failed in require at utils/upgrade_db.pl line 8. BEGIN failed--compilation aborted at utils/upgrade_db.pl line 8. # Looks like you planned 116 tests but only ran 7. # Looks like you failed 7 tests of 7 run. # Looks like your test died just after 7. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-116 Failed 116/116 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/17_import.t 255 65280 11 10 7-11 t/18_export.t 255 65280 6 10 2-6 t/44_upgrade_db.t 255 65280 116 225 1-116 6 tests and 4 subtests skipped. Failed 3/43 test scripts. 126/1455 subtests failed. Files=43, Tests=1455, 71 wallclock secs (12.99 cusr + 1.35 csys = 14.34 CPU) Failed 3/43 test programs. 126/1455 subtests failed. make: *** [test_dynamic] Error 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ----------------- ----- ------- Clone 0.01 0.27 Digest::MD5 1.00 2.36_01 Fcntl 0.01 1.06 File::Path 0.01 2.01 File::Temp 0.01 0.18 FileHandle::Fmode 0.05 0.09 Scalar::Util 1.14 1.19 Test::Deep 0.095 0.098 Test::Exception 0.21 0.25 Test::More 0.47 0.72 Test::Warn 0.08 0.10 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 26517 PERL5_CPAN_IS_RUNNING = 26517 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- --------- CPAN 1.92_51 Cwd 3.25 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.36_01 ExtUtils::Manifest 1.51_01 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808_01 Module::Signature 0.55 Test::Harness 2.64 Test::More 0.72 YAML 0.66 YAML::Syck 0.97 version 0.73 -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.22-1-k7, archname=i686-linux uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/pUQcOxh/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Duserelocatableinc' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=undef, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.6.1' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
