This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear MLEHMANN, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Oct 5 21:32:29 2007] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/IO-AIO-2.5.tar.gz' [MSG] [Fri Oct 5 21:32:32 2007] Trying to get 'http://www.cpan.org/authors/id/M/ML/MLEHMANN/CHECKSUMS' [MSG] [Fri Oct 5 21:32:34 2007] Checksum matches for 'IO-AIO-2.5.tar.gz' [MSG] [Fri Oct 5 21:32:34 2007] Extracted 'IO-AIO-2.5/' [MSG] [Fri Oct 5 21:32:34 2007] Extracted 'IO-AIO-2.5/t/' [MSG] [Fri Oct 5 21:32:34 2007] Extracted 'IO-AIO-2.5/t/06_group.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/07_feeder.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/02_read.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/04_fork.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/05_readdir.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/03_errors.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/01_stat.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/aio_test_common.pm' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/t/00_load.t' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/genac' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/README' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/autoconf/' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/autoconf/configure' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/autoconf/configure.ac' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/autoconf/config.h.in' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/Changes' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/Makefile.PL' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/xthread.h' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/META.yml' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/typemap' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/autoconf.pm' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/COPYING' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/AIO.pm' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/AIO.xs' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO-AIO-2.5/MANIFEST' [MSG] [Fri Oct 5 21:32:35 2007] Extracted 'IO::AIO' to '/opt/perl/testers/.cpanplus/5.8.8/build/IO-AIO-2.5' [MSG] [Fri Oct 5 21:32:38 2007] checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for futimes... yes checking for readahead... yes checking for fdatasync... yes checking for pread and pwrite... yes checking for readdir_r... yes checking for sendfile... yes configure: creating ./config.status config.status: creating config.h Checking if your kit is complete... Looks good Writing Makefile for IO::AIO [MSG] [Fri Oct 5 21:32:38 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 5 21:32:45 2007] Running Mkbootstrap for IO::AIO () cp AIO.pm blib/lib/IO/AIO.pm Manifying blib/man3/IO::AIO.3 [ERROR] [Fri Oct 5 21:32:47 2007] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00_load.......ok t/01_stat.......dubious Test returned status 0 (wstat 11, 0xb) DIED. FAILED test 10 Failed 1/10 tests, 90.00% okay t/02_read.......ok t/03_errors.....ok t/04_fork.......ok t/05_readdir....ok t/06_group......ok t/07_feeder.....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/01_stat.t 0 11 10 2 10 Failed 1/8 test scripts. 1/63 subtests failed. Files=8, Tests=63, 1 wallclock secs ( 0.49 cusr + 0.54 csys = 1.03 CPU) Failed 1/8 test programs. 1/63 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Fri Oct 5 21:32:47 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.20.12, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.20.12 #1 smp tue may 29 03:43:47 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE' cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
