This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Claus Faerber, This is a computer-generated report for Net-IDN-tools-0.99_20071012 on perl-5.6.2, created automatically by CPAN-Reporter-1.00 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. While attempting to build or test this distribution, the distribution signaled that support is not available either for this operating system or this version of Perl. Nevertheless, any diagnostic output produced is provided below for reference. Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /usr/local/perl-5.6.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00use...................ok t/01use_extra............. # Failed test 'use IDNA::Punycode;' # at t/01use_extra.t line 6. # Tried to use 'IDNA::Punycode'. # Error: Perl v5.6.6 required--this is only v5.6.2, stopped at /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/lib/IDNA/Punycode.pm line 7. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at t/01use_extra.t line 6. # Failed test 'use Encode::Punycode;' # at t/01use_extra.t line 7. # Tried to use 'Encode::Punycode'. # Error: Base class package "Encode::Encoding" is empty. # (Perhaps you need to 'use' the module which defines that package first.) # at /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/lib/Encode/Punycode.pm line 13 # BEGIN failed--compilation aborted at t/01use_extra.t line 7. # Compilation failed in require at (eval 2527) line 2. # BEGIN failed--compilation aborted at (eval 2527) line 2. # Looks like you failed 2 tests of 2. Dubious, test returned 2 (wstat 512, 0x200) Failed 2/2 subtests t/encode_bytes............ok t/encode_utf8.............ok t/nameprep_vec............ # Failed test 'Surrogate code U+DF42' # at t/nameprep_vec.t line 231. # got: 'í½' # expected: undef # Looks like you failed 1 test of 44. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/44 subtests t/punycode_vec............ok t/zenc_punyc_vec..........Can't locate Encode.pm in @INC (@INC contains: /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/lib /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/arch /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/lib /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-CZU5ZF/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-CZU5ZF/blib/lib /usr/local/perl-5.6.2/lib/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/5.6.2 /usr/local/perl-5.6.2/lib/site_perl/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/site_perl/5.6.2 /usr/local/perl-5.6.2/lib/site_perl .) at t/zenc_punyc_vec.t line 8. BEGIN failed--compilation aborted at t/zenc_punyc_vec.t line 8. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/zidna_punyc_prefix......Perl v5.6.6 required--this is only v5.6.2, stopped at /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/lib/IDNA/Punycode.pm line 7. Compilation failed in require at t/zidna_punyc_prefix.t line 7. BEGIN failed--compilation aborted at t/zidna_punyc_prefix.t line 7. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 16/16 subtests t/zidna_punyc_raw.........Perl v5.6.6 required--this is only v5.6.2, stopped at /home/sand/.cpan/build/Net-IDN-tools-0.99_20071012-WlbYBw/blib/lib/IDNA/Punycode.pm line 7. Compilation failed in require at t/zidna_punyc_raw.t line 7. BEGIN failed--compilation aborted at t/zidna_punyc_raw.t line 7. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run Test Summary Report ------------------- t/01use_extra.t (Wstat: 512 Tests: 2 Failed: 2) Failed test number(s): 1-2 Non-zero exit status: 2 t/nameprep_vec.t (Wstat: 256 Tests: 44 Failed: 1) Failed test number(s): 30 Non-zero exit status: 1 t/zenc_punyc_vec.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/zidna_punyc_prefix.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 16 tests but ran 0. t/zidna_punyc_raw.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=9, Tests=118, 5 wallclock secs ( 0.09 usr 0.01 sys + 4.15 cusr 0.11 csys = 4.36 CPU) Result: FAIL Failed 5/9 test programs. 3/118 subtests failed. make: *** [test_dynamic] Error 11 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ------------------- ---- ---- Unicode::Stringprep 1 1.00 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = /home/sand/.cpan/build/CORBA-Python-2.60-CZU5ZF/blib/arch:/home/sand/.cpan/build/CORBA-Python-2.60-CZU5ZF/blib/lib PERL5_CPANPLUS_IS_RUNNING = 24302 PERL5_CPAN_IS_RUNNING = 24302 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /usr/local/perl-5.6.2/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.9203 Cwd 3.25 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.36 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 2.99_04 Test::More 0.72 YAML n/a YAML::Syck 0.85 version 0.73 -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=linux, osvers=2.6.16-2-k7, archname=i686-linux-64int uname='linux k75 2.6.16-2-k7 #2 mon may 22 23:23:54 utc 2006 i686 gnulinux ' config_args='-Dprefix=/usr/local/perl-5.6.2 -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -es -Duse64bitint -Dusedevel -des' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.4 20060507 (prerelease) (Debian 4.0.3-3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, usemymalloc=n, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
