This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JKEGL, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Oct 16 11:18:41 2007] Trying to get 'http://www.cpan.org/authors/id/J/JK/JKEGL/Test-Weaken-0.001_003.tar.gz' [MSG] [Tue Oct 16 11:18:42 2007] Trying to get 'http://www.cpan.org/authors/id/J/JK/JKEGL/CHECKSUMS' [MSG] [Tue Oct 16 11:18:43 2007] Checksum matches for 'Test-Weaken-0.001_003.tar.gz' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/Changes' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/lib/' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/lib/Test/' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/lib/Test/Weaken.pm' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/Makefile.PL' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/MANIFEST' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/META.yml' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/README' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/t/' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/t/00-load.t' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/t/array.t' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/t/stein.t' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test-Weaken-0.001_003/t/weaken.t' [MSG] [Tue Oct 16 11:18:43 2007] Extracted 'Test::Weaken' to '/home/cpan/.cpanplus/5.8.8/build/Test-Weaken-0.001_003' [MSG] [Tue Oct 16 11:18:44 2007] Checking if your kit is complete... Looks good Writing Makefile for Test::Weaken [MSG] [Tue Oct 16 11:18:44 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Tue Oct 16 11:18:45 2007] cp lib/Test/Weaken.pm blib/lib/Test/Weaken.pm Manifying blib/man3/Test::Weaken.3 [ERROR] [Tue Oct 16 11:18:46 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load....# Testing Test::Weaken 0.001003, Perl 5.008008, /home/cpan/perl588/bin/perl ok t/array...... # Failed test 'Dump of unfreed arrays' # at t/array.t line 98. # got: 'Starting counts: w=2 s=4 # Unfreed counts: w=2 s=4 # Unfreed strong ref 0: a0 => [ r0, 711, r0 ] # Unfreed strong ref 1: r0 => a1 == [ r1, 42, r1 ] # Unfreed strong ref 2: a1 => [ r1, 42, r1 ] # Unfreed strong ref 3: r1 => a0 == [ r0, 711, r0 ] # Unfreed weak ref 0: r0 => a1 == [ r1, 42, r1 ] # Unfreed weak ref 1: r1 => a0 == [ r0, 711, r0 ] # ' # expected: 'Starting counts: w=2 s=4 # Unfreed counts: w=2 s=4 # Unfreed strong ref 0: r0 => a0 == [ r1, 711, r1 ] # Unfreed strong ref 1: a1 => [ r0, 42, r0 ] # Unfreed strong ref 2: r1 => a1 == [ r0, 42, r0 ] # Unfreed strong ref 3: a0 => [ r1, 711, r1 ] # Unfreed weak ref 0: r1 => a1 == [ r0, 42, r0 ] # Unfreed weak ref 1: r0 => a0 == [ r1, 711, r1 ] # ' # Looks like you failed 1 test of 2. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 2 Failed 1/2 tests, 50.00% okay t/stein......ok t/weaken.....ok Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/array.t 1 256 2 1 2 Failed 1/4 test scripts. 1/13 subtests failed. Files=4, Tests=13, 1 wallclock secs ( 0.35 cusr + 0.16 csys = 0.51 CPU) Failed 1/4 test programs. 1/13 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Tue Oct 16 11:18:46 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.72 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_GB.UTF-8 PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Test-Weaken-0.001_003/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Test-Weaken-0.001_003/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Test-Weaken-0.001_003/blib PERL5_CPANPLUS_IS_RUNNING = 13157 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.3', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
