This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear KARMAN, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Oct 19 12:59:54 2007] Trying to get 'http://www.cpan.org/authors/id/K/KA/KARMAN/SVN-Class-0.01.tar.gz' [MSG] [Fri Oct 19 12:59:55 2007] Trying to get 'http://www.cpan.org/authors/id/K/KA/KARMAN/CHECKSUMS' [MSG] [Fri Oct 19 12:59:56 2007] Checksum matches for 'SVN-Class-0.01.tar.gz' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/t/' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/t/boilerplate.t' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/t/pod-coverage.t' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/t/00-load.t' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/t/pod.t' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/Changes' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/lib/' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/lib/SVN/' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/lib/SVN/Class.pm' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/MANIFEST' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/Makefile.PL' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/README' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN-Class-0.01/META.yml' [MSG] [Fri Oct 19 12:59:56 2007] Extracted 'SVN::Class' to '/home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01' [MSG] [Fri Oct 19 12:59:57 2007] Checking if your kit is complete... Looks good Warning: prerequisite Class::Accessor::Fast 0 not found. Warning: prerequisite Data::Dump 0 not found. Writing Makefile for SVN::Class [MSG] [Fri Oct 19 12:59:57 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 12:59:57 2007] Module 'SVN::Class' requires 'Class::Accessor::Fast' version '0' to be installed [MSG] [Fri Oct 19 12:59:57 2007] Module 'SVN::Class' requires 'Data::Dump' version '0' to be installed [MSG] [Fri Oct 19 12:59:57 2007] Trying to get 'http://www.cpan.org/authors/id/K/KA/KASEI/CHECKSUMS' [MSG] [Fri Oct 19 12:59:57 2007] Checksum matches for 'Class-Accessor-0.31.tar.gz' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/t/' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/t/croak.t' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/t/bestpractice.t' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/t/getset.t' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/t/aliases.t' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/t/accessors.t' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/lib/' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/lib/Class/' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Faster.pm' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Fast.pm' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor.pm' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/README' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/Changes' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/Makefile.PL' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/META.yml' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/INSTALL' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/examples/' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/examples/benchmark' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class-Accessor-0.31/MANIFEST' [MSG] [Fri Oct 19 12:59:58 2007] Extracted 'Class::Accessor::Fast' to '/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31' [MSG] [Fri Oct 19 12:59:58 2007] Writing Makefile for Class::Accessor [MSG] [Fri Oct 19 12:59:58 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 12:59:59 2007] Manifying blib/man3/Class::Accessor::Fast.3 Manifying blib/man3/Class::Accessor::Faster.3 Manifying blib/man3/Class::Accessor.3 [MSG] [Fri Oct 19 13:00:00 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/accessors.......ok t/aliases.........ok t/bestpractice....ok t/croak...........ok t/getset..........ok All tests successful. Files=5, Tests=119, 1 wallclock secs ( 0.42 cusr + 0.17 csys = 0.59 CPU) [MSG] [Fri Oct 19 13:00:00 2007] Ok, not sending test report [MSG] [Fri Oct 19 13:00:00 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS' [MSG] [Fri Oct 19 13:00:02 2007] Checksum matches for 'Data-Dump-1.08.tar.gz' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/quote-unicode.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/regexp.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/scalar-obj.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/eval.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/tied.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/scalar.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/dump.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/quote.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/glob.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/t/ref.t' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/README' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/MANIFEST' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/Changes' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/lib/' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/lib/Data/' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/lib/Data/Dump.pm' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data-Dump-1.08/Makefile.PL' [MSG] [Fri Oct 19 13:00:02 2007] Extracted 'Data::Dump' to '/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08' [MSG] [Fri Oct 19 13:00:02 2007] Writing Makefile for Data::Dump [MSG] [Fri Oct 19 13:00:03 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 13:00:03 2007] Manifying blib/man3/Data::Dump.3 [MSG] [Fri Oct 19 13:00:05 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/dump.............ok t/eval.............ok t/glob.............ok t/quote-unicode....ok t/quote............ok t/ref..............ok t/regexp...........ok t/scalar-obj.......ok t/scalar...........ok t/tied.............ok All tests successful. Files=10, Tests=55, 2 wallclock secs ( 0.52 cusr + 0.30 csys = 0.82 CPU) [MSG] [Fri Oct 19 13:00:05 2007] Ok, not sending test report [MSG] [Fri Oct 19 13:00:06 2007] cp lib/SVN/Class.pm blib/lib/SVN/Class.pm Manifying blib/man3/SVN::Class.3 [ERROR] [Fri Oct 19 13:00:07 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... # Failed test 'use SVN::Class;' # at t/00-load.t line 6. # Tried to use 'SVN::Class'. # Error: Can't locate SVN/Class/File.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib /home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch /home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib /home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/lib /home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/arch /home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib /home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib/lib/SVN/Class.pm line 10. # BEGIN failed--compilation aborted at t/00-load.t line 6. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9. # Testing SVN::Class , Perl 5.008008, /home/cpan/perl588/bin/perl # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/boilerplate.....ok t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00-load.t 1 256 1 1 1 2 tests skipped. Failed 1/4 test scripts. 1/4 subtests failed. Files=4, Tests=4, 0 wallclock secs ( 0.40 cusr + 0.17 csys = 0.57 CPU) Failed 1/4 test programs. 1/4 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Fri Oct 19 13:00:08 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: SVN::Class::File As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'KARMAN ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'SVN::Class::File' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Class::Accessor::Fast 0.31 0 Data::Dump 1.08 0 IPC::Cmd 0.36 0 Path::Class 0.16 0 Test::More 0.72 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib:/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib:/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib:/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Data-Dump-1.08/blib:/home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib/lib:/home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib/arch:/home/cpan/.cpanplus/5.8.8/build/SVN-Class-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 27558 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 83 19 18 17 11 EGID: $) = 100 100 83 19 18 17 11 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
