This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Kevin L. Esteb, This is a computer-generated error report created automatically by CPANPLUS, version 0.81_01. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Oct 19 21:46:44 2007] Trying to get 'http://www.cpan.org/authors/id/K/KE/KESTEB/POE-Component-Client-Stomp-0.04.tar.gz' [MSG] [Fri Oct 19 21:46:45 2007] Trying to get 'http://www.cpan.org/authors/id/K/KE/KESTEB/CHECKSUMS' [MSG] [Fri Oct 19 21:46:46 2007] Checksum matches for 'POE-Component-Client-Stomp-0.04.tar.gz' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/t/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/t/POE-Component-Client-Stomp.t' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/lib/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/lib/POE/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/lib/POE/Component/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/lib/POE/Component/Client/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/lib/POE/Component/Client/Stomp.pm' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/README' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/Changes' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/Makefile.PL' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/META.yml' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/examples/' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/examples/feed_queue.pl' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/examples/stress_queue.pl' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/examples/dump_queue.pl' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE-Component-Client-Stomp-0.04/MANIFEST' [MSG] [Fri Oct 19 21:46:46 2007] Extracted 'POE::Component::Client::Stomp' to '/home/cpan/perl595/.cpanplus/5.9.5/build/POE-Component-Client-Stomp-0.04' [MSG] [Fri Oct 19 21:46:47 2007] Checking if your kit is complete... Looks good Warning: prerequisite Net::Stomp 0 not found. Warning: prerequisite POE::Component::Client::Stomp::Utils 0 not found. Warning: prerequisite POE::Filter::Stomp 0 not found. Writing Makefile for POE::Component::Client::Stomp [MSG] [Fri Oct 19 21:46:47 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 21:46:47 2007] Module 'POE::Component::Client::Stomp' requires 'Net::Stomp' version '0' to be installed [MSG] [Fri Oct 19 21:46:47 2007] Module 'POE::Component::Client::Stomp' requires 'POE::Component::Client::Stomp::Utils' version '0' to be installed [MSG] [Fri Oct 19 21:46:47 2007] Module 'POE::Component::Client::Stomp' requires 'POE::Filter::Stomp' version '0' to be installed [MSG] [Fri Oct 19 21:46:47 2007] Trying to get 'http://www.cpan.org/authors/id/L/LB/LBROCARD/Net-Stomp-0.32.tar.gz' [MSG] [Fri Oct 19 21:46:48 2007] Trying to get 'http://www.cpan.org/authors/id/L/LB/LBROCARD/CHECKSUMS' [MSG] [Fri Oct 19 21:46:49 2007] Checksum matches for 'Net-Stomp-0.32.tar.gz' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/t/' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/t/pod_coverage.t' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/t/pod.t' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/CHANGES' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/META.yml' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/lib/' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/lib/Net/' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/lib/Net/Stomp.pm' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/lib/Net/Stomp/' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/lib/Net/Stomp/Frame.pm' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/MANIFEST' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/Build.PL' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/Makefile.PL' [MSG] [Fri Oct 19 21:46:49 2007] Extracted 'Net-Stomp-0.32/README' [MSG] [Fri Oct 19 21:46:50 2007] Extracted 'Net::Stomp' to '/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32' [MSG] [Fri Oct 19 21:46:50 2007] Checking if your kit is complete... Looks good Warning: prerequisite Class::Accessor::Fast 0 not found. Writing Makefile for Net::Stomp [MSG] [Fri Oct 19 21:46:50 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 21:46:50 2007] Module 'Net::Stomp' requires 'Class::Accessor::Fast' version '0' to be installed [MSG] [Fri Oct 19 21:46:51 2007] Trying to get 'http://www.cpan.org/authors/id/K/KA/KASEI/CHECKSUMS' [MSG] [Fri Oct 19 21:46:51 2007] Checksum matches for 'Class-Accessor-0.31.tar.gz' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/t/' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/t/croak.t' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/t/bestpractice.t' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/t/getset.t' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/t/aliases.t' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/t/accessors.t' [MSG] [Fri Oct 19 21:46:51 2007] Extracted 'Class-Accessor-0.31/lib/' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/lib/Class/' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Faster.pm' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Fast.pm' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/lib/Class/Accessor.pm' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/README' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/Changes' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/Makefile.PL' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/META.yml' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/INSTALL' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/examples/' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/examples/benchmark' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class-Accessor-0.31/MANIFEST' [MSG] [Fri Oct 19 21:46:52 2007] Extracted 'Class::Accessor::Fast' to '/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31' [MSG] [Fri Oct 19 21:46:53 2007] Writing Makefile for Class::Accessor [MSG] [Fri Oct 19 21:46:53 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 21:46:53 2007] Manifying blib/man3/Class::Accessor::Fast.3 Manifying blib/man3/Class::Accessor::Faster.3 Manifying blib/man3/Class::Accessor.3 [MSG] [Fri Oct 19 21:46:55 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/accessors.......ok t/aliases.........ok t/bestpractice....ok t/croak...........ok t/getset..........ok All tests successful. Files=5, Tests=119, 1 wallclock secs ( 0.11 cusr + 0.16 csys = 0.27 CPU) [MSG] [Fri Oct 19 21:46:55 2007] Ok, not sending test report [MSG] [Fri Oct 19 21:46:57 2007] cp lib/Net/Stomp/Frame.pm blib/lib/Net/Stomp/Frame.pm cp lib/Net/Stomp.pm blib/lib/Net/Stomp.pm Manifying blib/man3/Net::Stomp::Frame.3 Manifying blib/man3/Net::Stomp.3 [MSG] [Fri Oct 19 21:46:58 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD t/pod_coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage All tests successful, 2 tests skipped. Files=2, Tests=0, 1 wallclock secs ( 0.03 cusr + 0.08 csys = 0.11 CPU) [MSG] [Fri Oct 19 21:46:58 2007] Successfully sent 'pass' report for 'Net-Stomp-0.32' [MSG] [Fri Oct 19 21:46:58 2007] Known uninstallable prereqs POE-Component-Client-Stomp-Utils-0.01 - aborting install [MSG] [Fri Oct 19 21:46:58 2007] Will not install prerequisite 'POE::Component::Client::Stomp::Utils' -- Note that the overall install may fail due to this [MSG] [Fri Oct 19 21:46:58 2007] Trying to get 'http://www.cpan.org/authors/id/K/KE/KESTEB/POE-Filter-Stomp-0.01.tar.gz' [MSG] [Fri Oct 19 21:46:58 2007] Trying to get 'http://www.cpan.org/authors/id/K/KE/KESTEB/CHECKSUMS' [MSG] [Fri Oct 19 21:46:59 2007] Checksum matches for 'POE-Filter-Stomp-0.01.tar.gz' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/t/' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/t/POE-Filter-Stomp.t' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/lib/' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/lib/POE/' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/lib/POE/Filter/' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/lib/POE/Filter/Stomp.pm' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/README' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/Changes' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/Makefile.PL' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/META.yml' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE-Filter-Stomp-0.01/MANIFEST' [MSG] [Fri Oct 19 21:46:59 2007] Extracted 'POE::Filter::Stomp' to '/home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01' [MSG] [Fri Oct 19 21:47:00 2007] Checking if your kit is complete... Looks good Writing Makefile for POE::Filter::Stomp [MSG] [Fri Oct 19 21:47:00 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Fri Oct 19 21:47:02 2007] cp lib/POE/Filter/Stomp.pm blib/lib/POE/Filter/Stomp.pm Manifying blib/man3/POE::Filter::Stomp.3 [ERROR] [Fri Oct 19 21:47:03 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl595/bin/perl5.9.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/POE-Filter-Stomp.... # Failed test 'use POE::Filter::Stomp;' # at t/POE-Filter-Stomp.t line 9. # Tried to use 'POE::Filter::Stomp'. # Error: Can't locate IO/String.pm in @INC (@INC contains: /home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib/lib /home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib/arch /home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib/lib /home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib/arch /home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib /home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib/lib /home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib/arch /home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib /home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib /home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/5.9.5 /home/cpan/perl595/lib/site_perl/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/site_perl/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/site_perl/5.9.5 . /home/cpan/perl595/lib/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/5.9.5 /home/cpan/perl595/lib/site_perl/5.9.5/i686-linux-thread-multi-64int /home/cpan/perl595/lib/site_perl/5.9.5 .) at /home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib/lib/POE/Filter/Stomp.pm line 25. # BEGIN failed--compilation aborted at t/POE-Filter-Stomp.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/POE-Filter-Stomp.t 1 256 1 1 1 Failed 1/1 test scripts. 1/1 subtests failed. Files=1, Tests=1, 0 wallclock secs ( 0.02 cusr + 0.05 csys = 0.07 CPU) Failed 1/1 test programs. 1/1 subtests failed. make: *** [test_dynamic] Error 1 [MSG] [Fri Oct 19 21:47:03 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: IO::String As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Kevin L. Esteb ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'IO::String' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = en_US LC_COLLATE = C PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:. PERL5LIB = :/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Class-Accessor-0.31/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/Net-Stomp-0.32/blib:/home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib/lib:/home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib/arch:/home/cpan/perl595/.cpanplus/5.9.5/build/POE-Filter-Stomp-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 10432 PERL5_CPANPLUS_IS_VERSION = 0.81_01 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen.linux Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl595/bin/perl5.9.5 UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 11 17 18 19 83 100 EGID: $) = 100 11 17 18 19 83 100 ------------------------------- -- Summary of my perl5 (revision 5 version 9 subversion 5) configuration: Platform: osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
