This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Michael Schilli, This is a computer-generated error report created automatically by CPANPLUS, version 0.80. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Oct 28 09:52:08 2007] Trying to get 'http://www.cpan.org/authors/id/M/MS/MSCHILLI/CHECKSUMS' [MSG] [Sun Oct 28 09:52:09 2007] Checksum matches for 'Buffalo-G54-0.02.tar.gz' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/adm/' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/adm/podok' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/Changes' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/eg/' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/eg/router-version' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/eg/router-reboot' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/eg/buffalo-dhcp' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/lib/' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/lib/Buffalo/' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/lib/Buffalo/G54.pm' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/MANIFEST' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/t/' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/t/001Basic.t' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/MANIFEST.SKIP' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/README' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/Makefile.PL' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo-G54-0.02/META.yml' [MSG] [Sun Oct 28 09:52:10 2007] Extracted 'Buffalo::G54' to '/home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02' [MSG] [Sun Oct 28 09:52:11 2007] Checking if your kit is complete... Looks good Writing Makefile for Buffalo::G54 [MSG] [Sun Oct 28 09:52:11 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Oct 28 09:52:13 2007] cp lib/Buffalo/G54.pm blib/lib/Buffalo/G54.pm Manifying blib/man3/Buffalo::G54.3 [ERROR] [Sun Oct 28 09:52:14 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl586/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/001Basic....Can't locate Log/Log4perl.pm in @INC (@INC contains: /home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02/blib/lib /home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02/blib/arch /home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02/blib /home/cpan/perl586/lib/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/5.8.6 /home/cpan/perl586/lib/site_perl/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/site_perl/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/site_perl/5.8.6 /home/cpan/perl586/lib/site_perl/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/site_perl/5.8.6 /home/cpan/perl586/lib/site_perl . /home/cpan/perl586/lib/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/5.8.6 /home/cpan/perl586/lib/site_perl/5.8.6/i386-netbsd-thread-multi-64int /home/cpan/perl586/lib/site_perl/5.8.6 /home/cpan/perl586/lib/site_perl .) at t/001Basic.t line 9. BEGIN failed--compilation aborted at t/001Basic.t line 9. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) [MSG] [Sun Oct 28 09:52:14 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Log::Log4perl As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Michael Schilli ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Log::Log4perl' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02/blib/lib:/home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02/blib/arch:/home/cpan/perl586/.cpanplus/5.8.6/build/Buffalo-G54-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 5455 PERL5_CPANPLUS_IS_VERSION = 0.80 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/pkg/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl586/bin/perl UID: $< = 1002 EUID: $> = 1002 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 [EMAIL PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include' ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
