This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear OYAMA, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Oct 29 16:57:11 2007] Trying to get 'http://www.cpan.org/authors/id/O/OY/OYAMA/Crypt-CCM-0.02.tar.gz' [MSG] [Mon Oct 29 16:57:14 2007] Trying to get 'http://www.cpan.org/authors/id/O/OY/OYAMA/CHECKSUMS' [MSG] [Mon Oct 29 16:57:16 2007] Checksum matches for 'Crypt-CCM-0.02.tar.gz' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/CCM.xs' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/Changes' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/lib/' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/lib/Crypt/' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/lib/Crypt/CCM.pm' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/Makefile.PL' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/MANIFEST' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/META.yml' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/ppport.h' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/README' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/t/' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/t/00-load.t' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/t/01-api.t' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/t/02-SP800-38C.t' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/t/03-rfc3610.t' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt-CCM-0.02/t/encrypt-ex4a.bin' [MSG] [Mon Oct 29 16:57:16 2007] Extracted 'Crypt::CCM' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02' [MSG] [Mon Oct 29 16:57:18 2007] Checking if your kit is complete... Looks good Warning: prerequisite Crypt::Rijndael 0 not found. Writing Makefile for Crypt::CCM [MSG] [Mon Oct 29 16:57:18 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Oct 29 16:57:18 2007] Module 'Crypt::CCM' requires 'Crypt::Rijndael' version '0' to be installed [MSG] [Mon Oct 29 16:57:18 2007] Trying to get 'http://www.cpan.org/authors/id/B/BD/BDFOY/Crypt-Rijndael-1.04.tar.gz' [MSG] [Mon Oct 29 16:57:21 2007] Trying to get 'http://www.cpan.org/authors/id/B/BD/BDFOY/CHECKSUMS' [MSG] [Mon Oct 29 16:57:23 2007] Checksum matches for 'Crypt-Rijndael-1.04.tar.gz' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/_rijndael.c' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/Changes' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/COPYING' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/examples/' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/examples/README' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/LICENSE' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/Makefile.PL' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/MANIFEST' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/META.yml' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/NEWS' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/README' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/rijndael.h' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/Rijndael.pm' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/Rijndael.xs' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/t/' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/t/00_load.t' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/t/pod.t' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/t/pod_coverage.t' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/t/test_manifest' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt-Rijndael-1.04/typemap' [MSG] [Mon Oct 29 16:57:23 2007] Extracted 'Crypt::Rijndael' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04' [MSG] [Mon Oct 29 16:57:25 2007] Checking if your kit is complete... Looks good Writing Makefile for Crypt::Rijndael [MSG] [Mon Oct 29 16:57:25 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Oct 29 16:57:30 2007] cp Rijndael.pm blib/lib/Crypt/Rijndael.pm gcc -c -D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"1.04\" -DXS_VERSION=\"1.04\" -fPIC "-I/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE" _rijndael.c /export/home/chris/perl588/bin/perl /export/home/chris/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /export/home/chris/perl588/lib/5.8.8/ExtUtils/typemap -typemap typemap Rijndael.xs > Rijndael.xsc && mv Rijndael.xsc Rijndael.c gcc -c -D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"1.04\" -DXS_VERSION=\"1.04\" -fPIC "-I/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE" Rijndael.c Running Mkbootstrap for Crypt::Rijndael () chmod 644 Rijndael.bs rm -f blib/arch/auto/Crypt/Rijndael/Rijndael.so gcc -G -L/usr/local/lib _rijndael.o Rijndael.o -o blib/arch/auto/Crypt/Rijndael/Rijndael.so \ \ chmod 755 blib/arch/auto/Crypt/Rijndael/Rijndael.so cp Rijndael.bs blib/arch/auto/Crypt/Rijndael/Rijndael.bs chmod 644 blib/arch/auto/Crypt/Rijndael/Rijndael.bs Manifying blib/man3/Crypt::Rijndael.3 [MSG] [Mon Oct 29 16:57:32 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.........ok t/pod.............skipped all skipped: Test::Pod 1.00 required for testing POD t/pod_coverage....skipped all skipped: Test::Pod::Coverage 1.00 required for testing POD coverage All tests successful, 2 tests skipped. Files=3, Tests=41, 1 wallclock secs ( 0.26 cusr + 0.14 csys = 0.40 CPU) [MSG] [Mon Oct 29 16:57:32 2007] Ok, not sending test report [MSG] [Mon Oct 29 16:57:37 2007] cp lib/Crypt/CCM.pm blib/lib/Crypt/CCM.pm /export/home/chris/perl588/bin/perl /export/home/chris/perl588/lib/5.8.8/ExtUtils/xsubpp -typemap /export/home/chris/perl588/lib/5.8.8/ExtUtils/typemap CCM.xs > CCM.xsc && mv CCM.xsc CCM.c Please specify prototyping behavior for CCM.xs (see perlxs manual) gcc -c -I. -D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE" CCM.c In file included from CCM.xs:5: ppport.h:2979:1: warning: "PERL_UNUSED_DECL" redefined In file included from CCM.xs:2: /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE/perl.h:163:1: warning: this is the location of the previous definition Running Mkbootstrap for Crypt::CCM () chmod 644 CCM.bs rm -f blib/arch/auto/Crypt/CCM/CCM.so gcc -G -L/usr/local/lib CCM.o -o blib/arch/auto/Crypt/CCM/CCM.so \ \ chmod 755 blib/arch/auto/Crypt/CCM/CCM.so cp CCM.bs blib/arch/auto/Crypt/CCM/CCM.bs chmod 644 blib/arch/auto/Crypt/CCM/CCM.bs Manifying blib/man3/Crypt::CCM.3 [ERROR] [Mon Oct 29 16:57:39 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... # Failed test 'use Crypt::CCM;' # at t/00-load.t line 9. # Tried to use 'Crypt::CCM'. # Error: Can't locate Crypt/CTR.pm in @INC (@INC contains: /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl . /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl .) at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. # BEGIN failed--compilation aborted at t/00-load.t line 9. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/01-api..........Can't locate Crypt/CTR.pm in @INC (@INC contains: /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl . /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl .) at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. BEGIN failed--compilation aborted at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. Compilation failed in require at t/01-api.t line 5. BEGIN failed--compilation aborted at t/01-api.t line 5. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t/02-SP800-38C....Can't locate Crypt/CTR.pm in @INC (@INC contains: /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl . /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl .) at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. BEGIN failed--compilation aborted at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. Compilation failed in require at t/02-SP800-38C.t line 6. BEGIN failed--compilation aborted at t/02-SP800-38C.t line 6. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) t/03-rfc3610......Can't locate Crypt/CTR.pm in @INC (@INC contains: /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/lib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/arch /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl . /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/5.8.8 /export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int /export/home/chris/perl588/lib/site_perl/5.8.8 /export/home/chris/perl588/lib/site_perl .) at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. BEGIN failed--compilation aborted at /export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib/Crypt/CCM.pm line 6. Compilation failed in require at t/03-rfc3610.t line 6. BEGIN failed--compilation aborted at t/03-rfc3610.t line 6. # Looks like your test died before it could output anything. dubious Test returned status 255 (wstat 65280, 0xff00) Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00-load.t 1 256 1 1 1 t/01-api.t 255 65280 7 14 1-7 t/02-SP800-38C.t 255 65280 ?? ?? ?? t/03-rfc3610.t 255 65280 ?? ?? ?? Failed 4/4 test scripts. 8/8 subtests failed. Files=4, Tests=8, 1 wallclock secs ( 0.49 cusr + 0.20 csys = 0.69 CPU) Failed 4/4 test programs. 8/8 subtests failed. *** Error code 255 make: Fatal error: Command failed for target `test_dynamic' [MSG] [Mon Oct 29 16:57:39 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Crypt::CTR As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'OYAMA ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Crypt::CTR' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Crypt::Rijndael 1.04 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 LANG = C PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin: PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-Rijndael-1.04/blib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Crypt-CCM-0.02/blib PERL5_CPANPLUS_IS_RUNNING = 19058 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl588/bin/perl UID: $< = 100 EUID: $> = 100 GID: $( = 1 1 EGID: $) = 1 1 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
