This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Alain Barbet, This is a computer-generated report for Filesys-SmbClient-3.1 on perl-5.8.8, created automatically by CPAN-Reporter-1.04 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect, please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/perl Makefile.PL PREFIX=~/ SITELIBEXP=~/lib/perl5 LIB=~/lib/perl5 INSTALLMAN1DIR=~/share/man/man1 INSTALLMAN3DIR=~/share/man/man3 INSTALLSITEMAN1DIR=~/share/man/man1 INSTALLSITEMAN3DIR=~/share/man/man3': I search in: /include /usr/X11/include /usr/games/include /usr/local/samba/include /usr/local/include /usr/include /usr/local/samba3/include Where can I find libsmbclient.h ? [] ************************************************************* ** WHAT !!!! ** I Can't find /libsmbclient.h : No such file or directory. ************************************************************* If you don't have this file you can download last version of Samba on www.samba.org and do: $ tar zxvf samba-2.2.x.tar.gz $ cd samba-2.2.x/source $ ./configure $ make bin/libsmbclient.so Then you can find libsmbclient.h in source/include directory and libsmbclient.so in source/bin directory. You can then put them in /usr/include and /usr/lib (or /usr/local/include and /usr/local/lib) I search in: /lib /usr/X11/lib /usr/games/lib /usr/local/samba/lib /usr/local/lib /usr/lib /usr/local/samba3/lib Where can I find libsmbclient.so ? [] ************************************************************* ** WHAT !!!! ** I Can't find libsmbclient.so : No such file or directory. ************************************************************* If you don't have this file you can download last version of Samba on www.samba.org and do: $ tar zxvf samba-2.2.x.tar.gz $ cd samba-2.2.x/source $ ./configure $ make bin/libsmbclient.so Then you can find libsmbclient.h in source/include directory and libsmbclient.so in source/bin directory. You can then put them in /usr/include and /usr/lib (or /usr/local/include and /usr/local/lib) Do you want make tests ?(you will be prompted for server / worgroup / share / user / password to make read write access. [yes] yes Server ? [localhost] localhost Share ? [homes] homes Workgroup/Domain ? [] Smb user ? [icerider70] icerider70 Smb password ? Compile module with trace to STDERR ? [no] no checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for working alloca.h... yes checking for alloca... yes checking for smbc_mkdir in -lsmbclient... no configure: error: I can't find your libsmbclient.so or symbol smbc_mkdir. Check config.log for details. Can't run configure:Invalid argument ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = en_US.UTF-8 PATH = /usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games PERL5LIB = /home/icerider70/.cpan/build/Test-Differences-0.47-RmNVGr/blib/arch:/home/icerider70/.cpan/build/Test-Differences-0.47-RmNVGr/blib/lib:/home/icerider70/.cpan/build/Text-Diff-0.35-BPMSLe/blib/arch:/home/icerider70/.cpan/build/Text-Diff-0.35-BPMSLe/blib/lib PERL5_CPANPLUS_IS_RUNNING = 21347 PERL5_CPAN_IS_EXECUTING = /home/icerider70/.cpan/build/Filesys-SmbClient-3.1-50f4OL/Makefile.PL PERL5_CPAN_IS_RUNNING = 21347 PERL_AUTOINSTALL = --defaultdeps PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = xterm Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /usr/bin/perl $UID/$EUID = 1001 / 1001 $GID = 1001 1001 $EGID = 1001 1001 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.76_02 Cwd 3.12 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.09 ExtUtils::Install 1.33 ExtUtils::MakeMaker 6.30_01 ExtUtils::Manifest 1.46 ExtUtils::ParseXS 2.18 File::Spec 3.12 Module::Build 0.2808 Module::Signature n/a Test::Harness 2.56 Test::More 0.62 YAML 0.66 YAML::Syck 0.98 version 0.73 -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=linux, osvers=2.6.18.3, archname=i486-linux-gnu-thread-multi uname='linux saens 2.6.18.3 #1 smp sat nov 25 13:39:52 est 2006 i686 gnulinux ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8 -Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O2', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-20)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt perllibs=-ldl -lm -lpthread -lc -lcrypt libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so.5.8.8 gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
