This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Daisuke Maki, This is a computer-generated report for Data-Decode-0.00004 on perl-5.8.6, created automatically by CPAN-Reporter-1.04 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect, please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/*/*.t t/01_load...................... # Failed test 'use Data::Decode::Encode::HTTP::Response;' # at t/01_load.t line 13. # Tried to use 'Data::Decode::Encode::HTTP::Response'. # Error: Can't locate Data/Decode/Util.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/inc /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/lib /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/arch /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/inc /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/lib /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/bl! ib/lib/Data/Decode/Encode/HTTP/Response.pm line 12. # BEGIN failed--compilation aborted at t/01_load.t line 13. # Compilation failed in require at (eval 14) line 2. # BEGIN failed--compilation aborted at (eval 14) line 2. # Looks like you failed 1 test of 5. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/5 subtests t/02_chain.....................ok t/99_kwalitee..................skipped: Enable TEST_KWALITEE to enable these tests t/99_pod-coverage..............skipped: Enable TEST_POD environment variable to test POD t/99_pod.......................skipped: Enable TEST_POD environment variable to test POD t/encode/01_guess..............ok t/encode/02_guess_jp...........ok t/encode/03_http_response...... # Failed test 'use Data::Decode::Encode::HTTP::Response;' # at t/encode/03_http_response.t line 8. # Tried to use 'Data::Decode::Encode::HTTP::Response'. # Error: Can't locate Data/Decode/Util.pm in @INC (@INC contains: /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/inc /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/lib /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/arch /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/inc /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/lib /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/Data-Decode-0.00004-Sdyi5f/bl! ib/lib/Data/Decode/Encode/HTTP/Response.pm line 12. # BEGIN failed--compilation aborted at t/encode/03_http_response.t line 8. # Compilation failed in require at (eval 7) line 2. # BEGIN failed--compilation aborted at (eval 7) line 2. Data::Decode::Encode::HTTP::Response=HASH(0x841a010) does not implement a 'decode' method at t/encode/03_http_response.t line 13 # Looks like you planned 21 tests but only ran 2. # Looks like you failed 1 test of 2 run. # Looks like your test died just after 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 20/21 subtests Test Summary Report ------------------- t/01_load.t (Wstat: 256 Tests: 5 Failed: 1) Failed test number(s): 5 Non-zero exit status: 1 t/encode/03_http_response.t (Wstat: 65280 Tests: 2 Failed: 1) Failed test number(s): 2 Non-zero exit status: 255 Parse errors: Bad plan. You planned 21 tests but ran 2. Files=8, Tests=34, 3 wallclock secs ( 0.09 usr 0.01 sys + 1.12 cusr 0.11 csys = 1.33 CPU) Result: FAIL Failed 2/8 test programs. 2/34 subtests failed. make: *** [test_dynamic] Error 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ------------------------ ---- ---- Carp 0 1.03 Class::Accessor::Fast 0 0.31 Encode 0 2.23 Encode::Guess 0 2.02 Exception::Class 0 1.23 HTML::Parser 0 3.56 HTTP::Response::Encoding 0 0.05 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 25548 PERL5_CPAN_IS_RUNNING = 25548 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.9204 Cwd 3.25 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.41 ExtUtils::MakeMaker 6.36 ExtUtils::Manifest 1.51 ExtUtils::ParseXS n/a File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 2.99_09 Test::More 0.72 YAML 0.66 YAML::Syck 0.99 version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-thread-multi-64int uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Dusethreads -Duse64bitint -Dusedevel -Doptimize=-g -Dnoextensions=Encode' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
