This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Wilson Snyder, This is a computer-generated report for Verilog-Perl-3.013 on perl-5.6.2, created automatically by CPAN-Reporter-1.05 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect, please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': make[1]: Entering directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Parser' make[1]: Leaving directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Parser' make[1]: Entering directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Preproc' cd src && make example make[2]: Entering directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Preproc/src' make[2]: `example' is up to date. make[2]: Leaving directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Preproc/src' make[2]: Entering directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Preproc/src' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Preproc/src' rm -f ../blib/arch/auto/Verilog/Preproc/Preproc.so LD_RUN_PATH="/usr/lib" g++ -shared -L/usr/local/lib Preproc.o -o ../blib/arch/auto/Verilog/Preproc/Preproc.so src/VFileLine.o src/VPreproc.o src/VPreprocLex.o \ -lstdc++ \ chmod 755 ../blib/arch/auto/Verilog/Preproc/Preproc.so make[1]: Leaving directory `/home/sand/.cpan/build/Verilog-Perl-3.013-Fmyzqr/Preproc' PERL_DL_NONLAZY=1 /usr/local/perl-5.6.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_pod...............ok t/01_manifest..........ok t/10_keywords..........ok t/12_splitbus..........ok t/14_numbers...........ok t/20_getopt............ok t/30_preproc...........ok t/32_noinc............. All 7 subtests passed t/34_parser............ok t/35_sigparser.........ok t/36_sigmany...........ok t/40_netlist...........ok t/42_dumpcheck.........ok t/44_create............ok t/46_link..............ok t/50_vrename...........ok t/56_editfiles.........ok t/58_vsplitmodule......ok t/60_vpm............... *** You do not seem to have VCS or NC-Verilog installed, not running rest of test. *** (If you do not own VCS/NC-Verilog, ignore this warning). ok t/80_vppp..............ok t/85_vhier.............ok Test Summary Report ------------------- Files=21, Tests=157, 10 wallclock secs ( 0.28 usr 0.02 sys + 6.17 cusr 0.65 csys = 7.12 CPU) Result: FAIL Failed 1/21 test programs. 0/157 subtests failed. make: *** [test_dynamic] Error 11 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have ---------- ---- ---- Pod::Usage 0 1.3 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 6556 PERL5_CPAN_IS_RUNNING = 6556 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /usr/local/perl-5.6.2/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.9204 Cwd 3.25_01 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.36 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.25_01 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.00 Test::More 0.73_01 YAML n/a YAML::Syck 0.85 version 0.73 -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=linux, osvers=2.6.16-2-k7, archname=i686-linux-64int uname='linux k75 2.6.16-2-k7 #2 mon may 22 23:23:54 utc 2006 i686 gnulinux ' config_args='-Dprefix=/usr/local/perl-5.6.2 -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -es -Duse64bitint -Dusedevel -des' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.4 20060507 (prerelease) (Debian 4.0.3-3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, usemymalloc=n, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
