This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to [EMAIL PROTECTED] to keep other
test volunteers informed and to prevent any duplicate effort.
--
E:\new\Test-Smoke-1.16_21>perl Makefile.PL
'Makefile.PL' no longer configures your perl core smoke suite!!!
Please use:
perl configsmoke.pl
Checking if your kit is complete...
Looks good
Writing Makefile for Test-Smoke
You can now run
nmake test
and after success
nmake distclean
E:\new\Test-Smoke-1.16_21>nmake test TEST_VERBOSE=1
Microsoft (R) Program Maintenance Utility Version 6.00.8168.0
Copyright (C) Microsoft Corp 1988-1998. All rights reserved.
cp mkovz.pl blib\lib\mkovz.pl
cp lib/Test/Smoke/Policy.pm blib\lib\Test/Smoke/Policy.pm
cp lib/Test/Smoke/Patcher.pm blib\lib\Test/Smoke/Patcher.pm
cp lib/Test/Smoke/Mailer.pm blib\lib\Test/Smoke/Mailer.pm
cp smokeperl.pl blib\lib\smokeperl.pl
cp mailrpt.pl blib\lib\mailrpt.pl
cp mktest.pl blib\lib\mktest.pl
cp configsmoke.pl blib\lib\configsmoke.pl
cp lib/Test/Smoke/SourceTree.pm blib\lib\Test/Smoke/SourceTree.pm
cp Configure.pl blib\lib\Configure.pl
cp lib/Mail/Sendmail.pm blib\lib\Mail/Sendmail.pm
cp lib/Test/Smoke/Syncer.pm blib\lib\Test/Smoke/Syncer.pm
cp W32Configure.pl blib\lib\W32Configure.pl
cp synctree.pl blib\lib\synctree.pl
cp patchtree.pl blib\lib\patchtree.pl
cp lib/Test/Smoke/Util.pm blib\lib\Test/Smoke/Util.pm
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1,
'blib\lib',
'blib\arch')" t\cfgstuff.t t\for_dmake.t t\for_nmak
e.t t\get_cpus.t t\get_patch.t t\mailer.t t\manifest.t t\parse_report.t t\patcher.t
t\policy.t
t\skip_filter.t t\smoked_config.t t\syncer_co
py.t t\syncer_ftp.t t\syncer_link.t t\syncer_rsync.t t\syncer_snap.t t\tree.t
t\cfgstuff.........1..9
ok 1 - use Test::Smoke::Util;
ok 2 - Return undef for no args
ok 3 - Return undef for unknown
ok 4 - Confirm existance
ok 5 - Create local config file
ok 6 - get_cfg_name()
ok 7 - Return default configuration
ok 8 - Parse test configuration
ok 9 - Clean-up
ok
t\for_dmake........1..74
ok 1 - use Test::Smoke::Util;
ok 2 - New makefile (-Duseithreads -Duselargefiles -DINST_VER=\5.9.0
-DINST_ARCH=\$(ARCHNAME))
ok 3 - Sizes are equal for standard options (-Duseithreads)
ok 4 - Content compares
ok 5 - Remove makefile
ok 6 - New makefile (-DINST_DRV=F:)
ok 7 - Opening makefile
ok 8 - $(INST_DRV)
ok 9 - Untuched 1
ok 10 - Untuched 2
ok 11 - \#$(USE_MULTI)
ok 12 - \#$(USE_ITHREADS)
ok 13 - \#$(USE_IMP_SYS)
ok 14 - \#$(USE_LARGE_FILES)
ok 15 - Remove makefile
ok 16 - New makefile (-DINST_VER=\5.9.0)
ok 17 - Opening makefile
ok 18 - $(INST_DRV)
ok 19 - $(INST_DRV) Untuched 1
ok 20 - $(INST_VER)
ok 21 - \#$(INST_ARCH)
ok 22 - Remove makefile
ok 23 - New makefile (-DCCTYPE=MSVC60)
ok 24 - Opening makefile
ok 25 - $(CCTYPE) set 4 times
ok 26 - Untuched CCTYPE
ok 27 - \#$(USE_MULTI)
ok 28 - \#$(USE_ITHREADS)
ok 29 - \#$(USE_IMP_SYS)
ok 30 - \#$(USE_LARGE_FILES)
ok 31 - Remove makefile
ok 32 - New makefile (-Dusethreads)
ok 33 - Opening makefile
ok 34 - $(USE_MULTI) set
ok 35 - $(USE_ITHREADS) set
ok 36 - $(USE_IMP_SYS) set
ok 37 - Remove makefile
ok 38 - New makefile (-Duselargefiles)
ok 39 - Opening makefile
ok 40 - $(USE_LARGE_FILES) set
ok 41 - Remove makefile
ok 42 - New makefile (-des -Dusedevel -Duseithreads -Dusemymalloc -DCCTYPE=MSVC60
[EMAIL PROTECTED])
ok 43 - Opening makefile
ok 44 - $(USE_MULTI) set
ok 45 - $(USE_ITHREADS) set
ok 46 - $(USE_IMP_SYS) set
ok 47 - $(PERL_MALLOC) set
ok 48 - $(EMAIL) set
ok 49 - $(CCTYPE) set 4 times
ok 50 - Untuched CCTYPE
ok 51 - Remove makefile
ok 52 - New makefile (-DCCTYPE=GCC -Dgcc_v3_2)
ok 53 - Opening makefile
ok 54 - $(CCTYPE) set 4 times
ok 55 - Untuched CCTYPE
ok 56 - $(USE_GCC_V3_2) set
ok 57 - Remove makefile
ok 58 - New makefile (-DCCTYPE=BORLAND -Dbccold)
ok 59 - Opening makefile
ok 60 - $(CCTYPE) set 4 times
ok 61 - Untuched CCTYPE
ok 62 - $(BCCOLD) set
ok 63 - Remove makefile
ok 64 - New makefile (-des -Dusedevel/[osvers=5.0 W2000Pro])
ok 65 - Opening makefile
ok 66 - CFG_VARS macro for Config.pm
ok 67 - Remove makefile
ok 68 - New makefile (-des -Dusedevel/[osvers=5.0 W2000Pro ccversion=3.2])
ok 69 - Opening makefile
ok 70 - CFG_VARS macro for Config.pm skips emtpy arguments
ok 71 - Remove makefile
ok 72 - New makefile (-des -Dusedevel/[osvers=5.0 W2000Pro trash ccversion=3.2])
ok 73 - Opening makefile
ok 74 - CFG_VARS macro for Config.pm skips emtpy arguments
ok
t\for_nmake........1..53
ok 1 - use Test::Smoke::Util;
ok 2 - New makefile (-Duseithreads -Duselargefiles -DINST_VER=\5.9.0
-DINST_ARCH=\$(ARCHNAME))
ok 3 - Sizes are equal for standard options (-Duseithreads)
ok 4 - Remove makefile
ok 5 - New makefile (-DINST_DRV=F:)
ok 6 - Opening makefile
ok 7 - $(INST_DRV)
ok 8 - Untuched 1
ok 9 - Untuched 2
ok 10 - \#$(USE_MULTI)
ok 11 - \#$(USE_ITHREADS)
ok 12 - \#$(USE_IMP_SYS)
ok 13 - \#$(USE_LARGE_FILES)
ok 14 - Remove makefile
ok 15 - New makefile (-DCCTYPE=MSVC60)
ok 16 - Opening makefile
ok 17 - $(CCTYPE) set twice
ok 18 - Untuched CCTYPE
ok 19 - \#$(USE_MULTI)
ok 20 - \#$(USE_ITHREADS)
ok 21 - \#$(USE_IMP_SYS)
ok 22 - Remove makefile
ok 23 - New makefile (-Dusethreads)
ok 24 - Opening makefile
ok 25 - $(USE_MULTI) set
ok 26 - $(USE_ITHREADS) set
ok 27 - $(USE_IMP_SYS) set
ok 28 - Remove makefile
ok 29 - New makefile (-Duselargefiles)
ok 30 - Opening makefile
ok 31 - $(USE_LARGE_FILES) set
ok 32 - Remove makefile
ok 33 - New makefile (-des -Dusedevel -Duseithreads -Dusemymalloc -DCCTYPE=MSVC60
[EMAIL PROTECTED])
ok 34 - Opening makefile
ok 35 - $(USE_MULTI) set
ok 36 - $(USE_ITHREADS) set
ok 37 - $(USE_IMP_SYS) set
ok 38 - $(PERL_MALLOC) set
ok 39 - $(EMAIL) set
ok 40 - $(CCTYPE) set twice
ok 41 - Untuched CCTYPE
ok 42 - Remove makefile
ok 43 - New makefile (-des -Dusedevel/[osvers=5.0 W2000Pro])
ok 44 - Opening makefile
ok 45 - CFG_VARS macro for Config.pm
ok 46 - Remove makefile
ok 47 - New makefile (-des -Dusedevel/[osvers=5.0 W2000Pro ccversion=cl 6.0])
ok 48 - Opening makefile
ok 49 - CFG_VARS macro for Config.pm
ok 50 - Remove makefile
ok 51 - New makefile (-des -Dusedevel/[osvers=5.0 W2000Pro trash ccversion=cl 6.0])
ok 52 - Opening makefile
ok 53 - CFG_VARS macro for Config.pm
ok
t\get_cpus.........1..3
ok 1 - use Test::Smoke::Util;
ok 2 - get_ncpu() is defined
ok 3 - Found: 1 cpu
ok
t\get_patch........1..4
ok 1 - use Test::Smoke::Util;
ok 2 - Found snaplevel: 17888(+)
ok 3 - Found patchlevel: 17999
ok 4 - Found snaplevel(2): 17888
ok
t\mailer...........1..16
ok 1 - use Test::Smoke::Mailer;
ok 2 # skip No 'mail' found
ok 3 # skip No 'mail' found
ok 4 # skip No 'mail' found
ok 5 # skip No 'mail' found
ok 6 # skip No 'mail' found
ok 7 # skip No 'mailx' found
ok 8 # skip No 'mailx' found
ok 9 # skip No 'mailx' found
ok 10 # skip No 'mailx' found
ok 11 # skip No 'mailx' found
ok 12 # skip No 'sendmail' found
ok 13 # skip No 'sendmail' found
ok 14 # skip No 'sendmail' found
ok 15 # skip No 'sendmail' found
ok 16 # skip No 'sendmail' found
ok
15/16 skipped: various reasons
t\manifest.........1..14
ok 1 - use Test::Smoke::Util;
ok 2 - check_MANIFEST() returns: isa HASH
ok 3 - All expected files are there
ok 4 - Yup, .patch is suspicious
ok 5 - and missing from the directory
ok 6 - Some files suspicious
ok 7 - Same files we put in
ok 8 - MANIFEST still has: Iamnotthere
ok 9 - MANIFEST still has: t/Iamnotthere
ok 10 - Found one suspicious file
ok 11 - ftppub/perl-current-diffs/20004.gz
ok 12 - MANIFEST did not declare: ftppub/perl-current-diffs/20004.gz
ok 13 - Returns: isa HASH
ok 14 - Empty, so we get the ok
ok
t\parse_report.....1..6
ok 1 - use Test::Smoke::Util;
ok 2 - Smoke [5.9.0] 19000 PASS linux 2.4.18-4g (i686/1 cpu)
ok 3 - Smoke [5.9.0] 19001 PASS MSWin32 5. (x86/1 cpu)
ok 4 - Smoke [5.9.0] 19002 PASS aix 4.3.1.0 (aix/8 cpus)
ok 5 - Smoke [5.9.0] 19003 PASS linux 2.4.20-1jv.7.x (i686/1 cpu)
ok 6 - Smoke [5.9.0] 19004 FAIL(F) dec_osf 5.1a (alpha/1 cpu)
ok
t\patcher..........1..30
ok 1 - use Test::Smoke::Patcher;
ok 2 - The object isa Test::Smoke::Patcher
ok 3 - destination dir (E:\new\Test-Smoke-1.16_21\t)
ok 4 - pfile attribute undef
ok 5 - patch attribute
ok 6 - popts attribute empty
ok 7 - v attribute is zero
ok 8 - Patch option '-bp1'
ok 9 # skip Cannot find a working 'patch' program.
ok 10 # skip Cannot find a working 'patch' program.
ok 11 # skip Cannot find a working 'patch' program.
ok 12 # skip Cannot find a working 'patch' program.
ok 13 # skip Cannot find a working 'patch' program.
ok 14 # skip Cannot find a working 'patch' program.
ok 15 # skip Cannot find a working 'patch' program.
ok 16 # skip Cannot find a working 'patch' program.
ok 17 # skip Cannot find a working 'patch' program.
ok 18 # skip Cannot find a working 'patch' program.
ok 19 # skip Cannot find a working 'patch' program.
ok 20 # skip Cannot find a working 'patch' program.
ok 21 # skip Cannot find a working 'patch' program.
ok 22 # skip No patch program or test-patch found
ok 23 # skip No patch program or test-patch found
ok 24 # skip No patch program or test-patch found
ok 25 # skip No patch program or test-patch found
ok 26 # skip No patch program or test-patch found
ok 27 # skip No patch program or test-patch found
ok 28 # skip No patch program or test-patch found
ok 29 # skip No patch program or test-patch found
ok 30 # skip No patch program or test-patch found
ok
22/30 skipped: various reasons
t\policy...........1..35
ok 1 - use Test::Smoke::Policy;
ok 2 - The object isa Test::Smoke::Policy
ok 3 - Got the right policy
ok 4 - Policy.sh up-to-date: -Dusedevel
ok 5 - Policy.sh up-to-date: -Dusedevel -DDEBUGGING
ok 6 - Policy.sh up-to-date: -Dusedevel -Dusethreads
ok 7 - Policy.sh up-to-date: -Dusedevel -Dusethreads -DDEBUGGING
ok 8 - Policy.sh up-to-date: -Dusedevel -DHAVE_COW
ok 9 - Policy.sh up-to-date: -Dusedevel -DHAVE_COW -DDEBUGGING
ok 10 - Policy.sh up-to-date: -Dusedevel -DHAVE_COW -Dusethreads
ok 11 - Policy.sh up-to-date: -Dusedevel -DHAVE_COW -Dusethreads -DDEBUGGING
ok 12 - Policy.sh up-to-date: -Dusedevel
ok 13 - Policy.sh up-to-date: -Dusedevel -DDEBUGGING
ok 14 - Policy.sh up-to-date: -Dusedevel -Duse64bitint
ok 15 - Policy.sh up-to-date: -Dusedevel -Duse64bitint -DDEBUGGING
ok 16 - Policy.sh up-to-date: -Dusedevel -Duse64bitall
ok 17 - Policy.sh up-to-date: -Dusedevel -Duse64bitall -DDEBUGGING
ok 18 - Policy.sh up-to-date: -Dusedevel -Duselongdouble
ok 19 - Policy.sh up-to-date: -Dusedevel -Duselongdouble -DDEBUGGING
ok 20 - Policy.sh up-to-date: -Dusedevel -Dusemorebits
ok 21 - Policy.sh up-to-date: -Dusedevel -Dusemorebits -DDEBUGGING
ok 22 - Policy.sh up-to-date: -Dusedevel -Duse64bitall -Duselongdouble
ok 23 - Policy.sh up-to-date: -Dusedevel -Duse64bitall -Duselongdouble -DDEBUGGING
ok 24 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads
ok 25 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -DDEBUGGING
ok 26 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duse64bitint
ok 27 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duse64bitint
-DDEBUGGING
ok 28 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duse64bitall
ok 29 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duse64bitall
-DDEBUGGING
ok 30 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duselongdouble
ok 31 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duselongdouble
-DDEBUGGING
ok 32 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Dusemorebits
ok 33 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Dusemorebits
-DDEBUGGING
ok 34 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duse64bitall
-Duselongdouble
ok 35 - Policy.sh up-to-date: -Dusedevel -Dusethreads -Duseithreads -Duse64bitall
-Duselongdouble
-DDEBUGGING
ok
t\skip_filter......1..14
ok 1 - use Test::Smoke::Util;
ok 2 - P: op/strict.............ok
ok 3 - F: op/strict.............FAILED
ok 4 - F: FAILED 4/10
ok 5 - P: t/op/64bitint........................skipping test on this platform
ok 6 - F: run/switches...........................FAILED test 7
ok 7 - F: Failed 1/20 tests, 95.00% okay
ok 8 - F: Failed 1/736 test scripts, 99.86% okay. 1/70360 subtests failed, 100.00%
okay.
ok 9 - F: Failed Test Stat Wstat Total Fail Failed List of Failed
ok 10 - F:
-------------------------------------------------------------------------------
ok 11 - F: run/switches.t 20 1 5.00% 7
ok 12 - F: 54 tests and 609 subtests skipped.
ok 13 - P: C:\usr\local\src\bleadperl\perl\miniperl.exe "-I..\..\lib" "-I..\..\lib"
-MExtUtils::Command -e cp bin/piconv blib\script\piconv
ok 14 - P: C:\usr\local\src\bleadperl\perl\miniperl.exe "-I..\..\lib" "-I..\..\lib"
-MExtUtils::Command -e cp bin/enc2xs blib\script\enc2xs
ok
t\smoked_config....1..15
ok 1 - use Test::Smoke::Util;
ok 2 - Architecture x86
ok 3 - cf_email
ok 4 - OS name: windows nt
ok 5 - OS version: 5.0
ok 6 - Perl version: 5.9.0
ok 7 - Architecture x86
ok 8 - cf_email
ok 9 - OS name: windows nt
ok 10 - OS version: 5.0
ok 11 - Perl version: 5.9.0
ok 12 - Architecture x86
ok 13 - OS name: windows nt
ok 14 - OS version: 5.0
ok 15 - Perl version: 5.?.?
ok
t\syncer_copy......1..8
ok 1 - use Test::Smoke::Syncer;
ok 2 - require Test::Smoke::SourceTree;
ok 3 - The object isa Test::Smoke::Syncer
ok 4 - The object isa Test::Smoke::Syncer::Copy
ok 5 - Patchlevel after copy: 20000
ok 6 - directories compare ok
ok 7 - All files seem to be copied
ok 8 - No other files have been added
ok
t\syncer_ftp.......1..7
ok 1 - use Test::Smoke::Syncer;
ok 2 - The object isa Test::Smoke::Syncer::Snapshot
Error in get(1) [2894]
ok 3 - Patchlevel 20000 by Archive::Tar
Error while patching:
Error while patching from 'internal content': at
E:\new\Test-Smoke-1.16_21\blib\lib/Test/Smoke/Syncer.pm line 804
Error while patching:
Error while patching from 'internal content': at
E:\new\Test-Smoke-1.16_21\blib\lib/Test/Smoke/Syncer.pm line 804
Error while patching:
Error while patching from 'internal content': at
E:\new\Test-Smoke-1.16_21\blib\lib/Test/Smoke/Syncer.pm line 804
not ok 4 - A patched snapshot 20000 by Compress::Zlib
# Failed test (t\syncer_ftp.t at line 106)
# got: '20000'
# expected: '20004'
ok 5 - The object isa Test::Smoke::Syncer::Snapshot
Error in get(1) [2894]
ok 6 - Patchlevel 20000 by C:\cygwin\bin\gzip.EXE -dc %s | C:\cygwin\bin\tar.EXE -xf -
Error while patching:
Error while patching from 'internal content': at
E:\new\Test-Smoke-1.16_21\blib\lib/Test/Smoke/Syncer.pm line 804
Error while patching:
Error while patching from 'internal content': at
E:\new\Test-Smoke-1.16_21\blib\lib/Test/Smoke/Syncer.pm line 804
Error while patching:
Error while patching from 'internal content': at
E:\new\Test-Smoke-1.16_21\blib\lib/Test/Smoke/Syncer.pm line 804
not ok 7 - A patched snapshot 20000 by C:\cygwin\bin\gzip.EXE -dc
# Failed test (t\syncer_ftp.t at line 141)
# got: '20000'
# expected: '20004'
# Looks like you failed 2 tests of 7.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 4, 7
Failed 2/7 tests, 71.43% okay
t\syncer_link......1..9
ok 1 - use Test::Smoke::Syncer;
ok 2 - The object isa Test::Smoke::Syncer
ok 3 - The object isa Test::Smoke::Syncer::Hardlink
ok 4 - croak on omitted {hdir}
ok 5 - It's a croak()
ok 6 - snapshot OK
ok 7 - number of files the same
ok 8 - Same files in the two dirs
ok 9 # skip Cannot check inodes on Windows-fs
ok
1/9 skipped: various reasons
t\syncer_rsync.....1..33
ok 1 - use Test::Smoke::Syncer;
ok 2 - No error on no type
ok 3 - The object isa Test::Smoke::Syncer::Rsync
ok 4 - {ddir} exists
ok 5 - {ddir} value
ok 6 - {opts} exists
ok 7 - {opts} value
ok 8 - {rsync} exists
ok 9 - {rsync} value
ok 10 - {source} exists
ok 11 - {source} value
ok 12 - No error on type 'rsync'
ok 13 - The object isa Test::Smoke::Syncer::Rsync
ok 14 - {ddir} exists
ok 15 - {ddir} value \usr\local\src\bleadperl\perl
ok 16 - {opts} exists
ok 17 - {opts} value -az --delete
ok 18 - {rsync} exists
ok 19 - {rsync} value rsync
ok 20 - {source} exists
ok 21 - {source} value ftp.linux.ActiveState.com::perl-current
ok 22 - No errror when options passed as hashref
ok 23 - The object isa Test::Smoke::Syncer::Rsync
ok 24 - {ddir} exists
ok 25 - {ddir} value \usr\local\src\bleadperl\perl
ok 26 - {opts} exists
ok 27 - {opts} value -az --delete
ok 28 - {rsync} exists
ok 29 - {rsync} value rsync
ok 30 - {source} exists
ok 31 - {source} value ftp.linux.ActiveState.com::perl-current
ok 32 - Error on unknown type
ok 33 - Error message on unknown type
ok
t\syncer_snap......1..3
ok 1 - use Test::Smoke::Syncer;
ok 2 - The object isa Test::Smoke::Syncer::Snapshot
ok 3 - ftp server for snapshot
ok
t\tree.............1..12
ok 1 - use Test::Smoke::SourceTree;
ok 2 - The object isa Test::Smoke::SourceTree
ok 3 - canonpath
ok 4 - rel2abs
Use of uninitialized value in pattern match (m//) at C:/Perl/lib/File/Spec/Win32.pm
line 72.
Use of uninitialized value in pattern match (m//) at C:/Perl/lib/File/Spec/Win32.pm
line 72.
Use of uninitialized value in pattern match (m//) at C:/Perl/lib/File/Spec/Win32.pm
line 140.
Use of uninitialized value in pattern match (m//) at C:/Perl/lib/File/Spec/Win32.pm
line 72.
Use of uninitialized value in pattern match (m//) at C:/Perl/lib/File/Spec/Win32.pm
line 72.
Use of uninitialized value in pattern match (m//) at C:/Perl/lib/File/Spec/Win32.pm
line 140.
ok 5 - abs2rel
ok 6 - mani2abs complex
ok 7 - The object isa Test::Smoke::SourceTree
ok 8 - One dubious file
ok 9 - It is .patch
ok 10 - abs2mani
ok 11 - new() must have arguments
ok 12 - it croak()s alright
ok
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t\syncer_ftp.t 2 512 7 2 28.57% 4 7
38 subtests skipped.
Failed 1/18 test scripts, 94.44% okay. 2/345 subtests failed, 99.42% okay.
NMAKE : fatal error U1077: 'C:\Perl\bin\perl.exe' : return code '0xff'
Stop.
E:\new\Test-Smoke-1.16_21>
--
Summary of my perl5 (revision 5 version 6 subversion 1) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=undef usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
Compiler:
cc='cl', ccflags ='-nologo -O1 -MD -DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT
-DHAVE_DES_FCRYPT
-DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DPERL_MSVCRT_READFIX',
optimize='-O1 -MD -DNDEBUG',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=4
alignbytes=8, usemymalloc=n, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -release -libpath:"C:/Perl\lib\CORE"
-machine:x86'
libpth="C:\Program Files\Microsoft Visual Studio\VC98\mfc\lib" "C:\Program
Files\Microsoft
Visual Studio\VC98\lib" "C:\Perl\lib\CORE"
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib
advapi32.lib
shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib
winmm.lib
version.lib odbc32.lib odbccp32.lib msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib
advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib
mpr.lib
winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl56.lib
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -release
-libpath:"C:/Perl\lib\CORE"
-machine:x86'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY USE_ITHREADS PERL_IMPLICIT_CONTEXT
PERL_IMPLICIT_SYS
Locally applied patches:
ActivePerl Build 633
Built under MSWin32
Compiled at Jun 17 2002 21:33:05
@INC:
C:/Perl/lib
C:/Perl/site/lib
.
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/
