This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Andrew Hoying, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Nov 12 11:31:29 2007] Trying to get 'http://www.cpan.org/authors/id/A/AH/AHOYING/POE-Component-Client-Traceroute-0.21.tar.gz' [MSG] [Mon Nov 12 11:31:30 2007] Trying to get 'http://www.cpan.org/authors/id/A/AH/AHOYING/CHECKSUMS' [MSG] [Mon Nov 12 11:31:30 2007] Checksum matches for 'POE-Component-Client-Traceroute-0.21.tar.gz' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/t/' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/t/01_trace.t' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/README' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/Makefile.PL' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/META.yml' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/CHANGES' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/examples/' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/examples/poe-traceroute.pl' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/Traceroute.pm' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE-Component-Client-Traceroute-0.21/MANIFEST' [MSG] [Mon Nov 12 11:31:30 2007] Extracted 'POE::Component::Client::Traceroute' to '/root/.cpanplus/5.8.6/build/POE-Component-Client-Traceroute-0.21' [MSG] [Mon Nov 12 11:31:31 2007] Checking if your kit is complete... Looks good Writing Makefile for POE::Component::Client::Traceroute [MSG] [Mon Nov 12 11:31:31 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Nov 12 11:31:32 2007] cp Traceroute.pm blib/lib/POE/Component/Client/Traceroute.pm Manifying blib/man3/POE::Component::Client::Traceroute.3 [ERROR] [Mon Nov 12 11:32:32 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_trace...... Dubious, test returned 2 (wstat 512, 0x200) Failed 2/4 subtests Test Summary Report ------------------- t/01_trace.t (Wstat: 512 Tests: 4 Failed: 2) Failed test number(s): 2-3 Non-zero exit status: 2 Files=1, Tests=4, 60 wallclock secs ( 0.02 usr 0.00 sys + 0.18 cusr 0.02 csys = 0.21 CPU) Result: FAIL *** Error code 25 Stop in /root/.cpanplus/5.8.6/build/POE-Component-Client-Traceroute-0.21. # Failed test 'Traceroute error' # at t/01_trace.t line 177. # Traceroute session timeout # Failed test 'Traceroute error' # at t/01_trace.t line 177. # Traceroute session timeout # Looks like you failed 2 tests of 4. Failed 1/1 test programs. 2/4 subtests failed. [HISTORY] [Mon Nov 12 11:32:42 2007] Proceed anyway? [y/N]: y PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want POE 0.9999 0.11 Time::HiRes 1.9708 1.2 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=freebsd, osvers=5.4-release, archname=i386-freebsd-64int uname='freebsd freebsd.org 5.4-release freebsd 5.4-release #0: sun apr 3 15:13:31 pdt 2005 [EMAIL PROTECTED]:usrsrcsysmagickernelpath i386 ' config_args='-sde -Dprefix=/usr/local -Darchlib=/usr/local/lib/perl5/5.8.6/mach -Dprivlib=/usr/local/lib/perl5/5.8.6 -Dman3dir=/usr/local/lib/perl5/5.8.6/perl/man/man3 -Dman1dir=/usr/local/man/man1 -Dsitearch=/usr/local/lib/perl5/site_perl/5.8.6/mach -Dsitelib=/usr/local/lib/perl5/site_perl/5.8.6 -Dscriptdir=/usr/local/bin -Dsiteman3dir=/usr/local/lib/perl5/5.8.6/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl -Dcc=cc -Doptimize=-O -pipe -Duseshrplib -Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.6/BSDPAN" -Ud_dosuid -Ui_gdbm -Dusethreads=n -Dusemymalloc=y -Duse64bitint' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=y, bincompat5005=undef Compiler: cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.6/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include', optimize='-O -pipe ', cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.6/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.2 [FreeBSD] 20040728', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-E -L/usr/local/lib' libpth=/usr/lib /usr/local/lib libs=-lm -lcrypt -lutil perllibs=-lm -lcrypt -lutil libc=, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/local/lib/perl5/5.8.6/mach/CORE' cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
