This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear ABALAMA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_09. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Nov 12 13:24:41 2007] Trying to get
'http://www.cpan.org/authors/id/A/AB/ABALAMA/TemplateM-2.01.tar.gz'
[MSG] [Mon Nov 12 13:24:48 2007] Trying to get
'http://www.cpan.org/authors/id/A/AB/ABALAMA/CHECKSUMS'
[MSG] [Mon Nov 12 13:24:49 2007] Checksum matches for 'TemplateM-2.01.tar.gz'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/Changes'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/Makefile.PL'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/MANIFEST'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/README'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/t/'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/t/1.t'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/TemplateM.htm'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM-2.01/TemplateM.pm'
[MSG] [Mon Nov 12 13:24:49 2007] Extracted 'TemplateM' to
'/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01'
[MSG] [Mon Nov 12 13:24:50 2007] Checking if your kit is complete...
Looks good
Writing Makefile for TemplateM
[MSG] [Mon Nov 12 13:24:50 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Mon Nov 12 13:24:55 2007] cp TemplateM.pm blib/lib/TemplateM.pm
Manifying blib/man3/TemplateM.3
[ERROR] [Mon Nov 12 13:24:55 2007] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/cpan/blead/bin/perl "-MExtUtils::Command::MM" "-e"
"test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1....
# Failed test 'use TemplateM;'
# at t/1.t line 9.
# Tried to use 'TemplateM'.
# Error: Can't locate LWP/Simple.pm in @INC (@INC contains:
/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib/lib
/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib/arch
/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib
/home/cpan/blead/lib/perl5/5.10.0/i386-netbsd-thread-multi-64int
/home/cpan/blead/lib/perl5/5.10.0/i386-netbsd-thread-multi-64int
/home/cpan/blead/lib/perl5/5.10.0
/home/cpan/blead/lib/perl5/site_perl/5.10.0/i386-netbsd-thread-multi-64int
/home/cpan/blead/lib/perl5/site_perl/5.10.0/i386-netbsd-thread-multi-64int
/home/cpan/blead/lib/perl5/site_perl/5.10.0 .
/home/cpan/blead/lib/perl5/5.10.0/i386-netbsd-thread-multi-64int
/home/cpan/blead/lib/perl5/5.10.0
/home/cpan/blead/lib/perl5/site_perl/5.10.0/i386-netbsd-thread-multi-64int
/home/cpan/blead/lib/perl5/site_perl/5.10.0 .) at
/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib/lib/TemplateM.pm
line 232.
# BEGIN failed--compilation aborted at t/1.t line 9.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/1.t 1 256 1 1 1
Failed 1/1 test scripts. 1/1 subtests failed.
Files=1, Tests=1, 0 wallclock secs ( 0.12 cusr + 0.01 csys = 0.13 CPU)
Failed 1/1 test programs. 1/1 subtests failed.
gmake: *** [test_dynamic] Error 1
[MSG] [Mon Nov 12 13:24:55 2007] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
LWP::Simple
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'ABALAMA ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'LWP::Simple' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB =
:/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib/lib:/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib/arch:/home/cpan/blead/.cpanplus/5.10.0/build/TemplateM-2.01/blib
PERL5_CPANPLUS_IS_RUNNING = 4133
PERL5_CPANPLUS_IS_VERSION = 0.83_09
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/blead/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0 patch 32280)
configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0:
tue oct 31 04:32:05 utc 2006 [EMAIL
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
i386 '
config_args='-de -Dprefix=/home/cpan/blead -Dusethreads -Duse64bitint
-Uusemymalloc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib
-L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared
-L/usr/pkg/lib'
