This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Olivier Thauvin, This is a computer-generated report for MDV-Distribconf-3.13 on perl-5.8.6, created automatically by CPAN-Reporter-1.05 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect, please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01distribconf...... # Failed test 'use MDV::Distribconf;' # at t/01distribconf.t line 17. # Tried to use 'MDV::Distribconf'. # Error: Can't locate Config/IniFiles.pm in @INC (@INC contains: /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf.pm line 159. # BEGIN failed--compilation aborted at t/01distribconf.t line 17. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Can't locate object method "new" via package "MDV::Distribconf" at t/01distribconf.t line 20. # Looks like you planned 130 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 130/130 subtests t/01history..........Can't locate Config/IniFiles.pm in @INC (@INC contains: /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf.pm line 159. BEGIN failed--compilation aborted at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf.pm line 159. Compilation failed in require at t/01history.t line 7. BEGIN failed--compilation aborted at t/01history.t line 7. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run t/02distribconf...... # Failed test 'use MDV::Distribconf::Build;' # at t/02distribconf.t line 8. # Tried to use 'MDV::Distribconf::Build'. # Error: Can't locate MDV/Packdrakeng.pm in @INC (@INC contains: /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/Build.pm line 16. # BEGIN failed--compilation aborted at t/02distribconf.t line 8. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Can't locate object method "new" via package "MDV::Distribconf::Build" at t/02distribconf.t line 10. # Looks like you planned 7 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 7/7 subtests t/03checks........... # Failed test 'use MDV::Distribconf::Checks;' # at t/03checks.t line 10. # Tried to use 'MDV::Distribconf::Checks'. # Error: Can't locate Config/IniFiles.pm in @INC (@INC contains: /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf.pm line 159. # BEGIN failed--compilation aborted at t/03checks.t line 10. # Compilation failed in require at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/MediaCFG.pm line 5. # BEGIN failed--compilation aborted at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/MediaCFG.pm line 5. # Compilation failed in require at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/Checks.pm line 19. # BEGIN failed--compilation aborted at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/Checks.pm line 19. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Undefined subroutine &MDV::Distribconf::Checks::_report_err called at t/03checks.t line 19. # Looks like you planned 4 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 4/4 subtests t/04mediacfg.........Can't locate MDV/Packdrakeng.pm in @INC (@INC contains: /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl/5.8.6 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/lib/site_perl .) at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/Build.pm line 16. BEGIN failed--compilation aborted at /home/sand/.cpan/build/MDV-Distribconf-3.13-F1okDe/blib/lib/MDV/Distribconf/Build.pm line 16. Compilation failed in require at t/04mediacfg.t line 7. BEGIN failed--compilation aborted at t/04mediacfg.t line 7. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 11/11 subtests Test Summary Report ------------------- t/01distribconf.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 130 tests but ran 1. t/01history.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/02distribconf.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 7 tests but ran 1. t/03checks.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 4 tests but ran 1. t/04mediacfg.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 11 tests but ran 0. Files=5, Tests=3, 1 wallclock secs ( 0.06 usr 0.02 sys + 0.44 cusr 0.06 csys = 0.58 CPU) Result: FAIL Failed 5/5 test programs. 3/3 subtests failed. make: *** [test_dynamic] Error 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = C PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 25330 PERL5_CPAN_IS_RUNNING = 25330 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------ CPAN 1.9205 Cwd 3.25 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.41 ExtUtils::MakeMaker 6.36 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.01 Test::More 0.72 YAML 0.66 YAML::Syck 0.99 version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-thread-multi-64int uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Dusethreads -Duse64bitint -Dusedevel -Doptimize=-g -Dnoextensions=Encode' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
