This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear PEVANS, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Nov 17 21:38:05 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PEVANS/Socket-GetAddrInfo-0.03.tar.gz' [MSG] [Sat Nov 17 21:38:06 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PEVANS/CHECKSUMS' [MSG] [Sat Nov 17 21:38:06 2007] Checksum matches for 'Socket-GetAddrInfo-0.03.tar.gz' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/02getnameinfo-socket6.t' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/01getaddrinfo-socket6.t' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/01getaddrinfo-nosocket6.t' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/00use.t' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/10compare-getnameinfo.pm' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/10compare-getaddrinfo.pm' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/t/02getnameinfo-nosocket6.t' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/META.yml' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/Changes' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/MANIFEST' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/lib/' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/lib/Socket/' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/lib/Socket/GetAddrInfo.pm' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/Build.PL' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket-GetAddrInfo-0.03/Makefile.PL' [MSG] [Sat Nov 17 21:38:07 2007] Extracted 'Socket::GetAddrInfo' to '/home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03' [MSG] [Sat Nov 17 21:38:10 2007] Checking if your kit is complete... Looks good Writing Makefile for Socket::GetAddrInfo [MSG] [Sat Nov 17 21:38:10 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Nov 17 21:38:23 2007] cp lib/Socket/GetAddrInfo.pm blib/lib/Socket/GetAddrInfo.pm [ERROR] [Sat Nov 17 21:38:38 2007] MAKE TEST failed: /home/cwill1is/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00use........................ok t/01getaddrinfo-nosocket6...... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 51/51 subtests Can't locate Test/Exception.pm in @INC (@INC contains: /home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib/lib /home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib/arch /home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/5.8.8 /home/cwill1is/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/site_perl/5.8.8 /home/cwill1is/perl588/lib/site_perl .) at t/01getaddrinfo-nosocket6.t line 6. BEGIN failed--compilation aborted at t/01getaddrinfo-nosocket6.t line 6. # Looks like your test died before it could output anything. t/01getaddrinfo-socket6........skipped: No Socket6 t/02getnameinfo-nosocket6...... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 6/6 subtests Can't locate Test/Exception.pm in @INC (@INC contains: /home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib/lib /home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib/arch /home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/5.8.8 /home/cwill1is/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/cwill1is/perl588/lib/site_perl/5.8.8 /home/cwill1is/perl588/lib/site_perl .) at t/02getnameinfo-nosocket6.t line 6. BEGIN failed--compilation aborted at t/02getnameinfo-nosocket6.t line 6. # Looks like your test died before it could output anything. t/02getnameinfo-socket6........skipped: No Socket6 Test Summary Report ------------------- t/01getaddrinfo-nosocket6.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 51 tests but ran 0. t/02getnameinfo-nosocket6.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 0. Files=5, Tests=1, 4 wallclock secs ( 0.09 usr 0.06 sys + 1.06 cusr 1.01 csys = 2.23 CPU) Result: FAIL Failed 2/5 test programs. 0/1 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Sat Nov 17 21:38:38 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Test::Exception As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'PEVANS ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Test::Exception' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.72 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 COMSPEC = C:\WINDOWS\system32\cmd.exe INCLUDE = ;C:\strawberry-perl\mingw\include;C:\strawberry-perl\perl\lib\CORE;C:\strawberry-perl\perl\lib\encode LIB = ;C:\strawberry-perl\mingw\lib;C:\strawberry-perl\perl\bin NUMBER_OF_PROCESSORS = 1 PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/strawberry-perl/dmake/bin:/cygdrive/c/strawberry-perl/mingw/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap PERL5LIB = :/home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib/lib:/home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib/arch:/home/cwill1is/perl588/.cpanplus/5.8.8/build/Socket-GetAddrInfo-0.03/blib PERL5_CPANPLUS_IS_RUNNING = 33804 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel SHELL = /bin/sh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cwill1is/perl588/bin/perl.exe UID: $< = 11964 EUID: $> = 11964 GID: $( = 10513 46503 47137 49232 18930 19834 44599 44594 13857 14694 11265 11812 11814 47366 51275 12222 10519 35917 10513 10512 1026 1003 545 544 EGID: $) = 10513 46503 47137 49232 18930 19834 44599 44594 13857 14694 11265 11812 11814 47366 51275 12222 10519 35917 10513 10512 1026 1003 545 544 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-23 18:50 i686 cygwin ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O2', cppflags='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='ld2', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib /lib libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat perllibs=-ldl -lcrypt -lgdbm_compat libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -L/usr/local/lib'
