This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JKEGL, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Mon Nov 19 18:44:46 2007] Trying to get 'http://www.cpan.org/authors/id/J/JK/JKEGL/Parse-Marpa-0.001_041.tar.gz' [MSG] [Mon Nov 19 18:44:47 2007] Trying to get 'http://www.cpan.org/authors/id/J/JK/JKEGL/CHECKSUMS' [MSG] [Mon Nov 19 18:44:48 2007] Checksum matches for 'Parse-Marpa-0.001_041.tar.gz' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/Changes' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/lib/' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/lib/Parse/' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/lib/Parse/Marpa/' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/lib/Parse/Marpa/ALGORITHM.pod' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/lib/Parse/Marpa/WHY_CALL_IT_MARPA.pod' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/lib/Parse/Marpa.pm' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/Makefile.PL' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/MANIFEST' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/META.yml' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/README' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/00-load.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/ah.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/ah2.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/equation.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/gj.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/hu.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/lex_minus.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/minus.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/pascal.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/self.pl' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/wall.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/t/weaken.t' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse-Marpa-0.001_041/TODO' [MSG] [Mon Nov 19 18:44:49 2007] Extracted 'Parse::Marpa' to '/home/chris/.cpanplus/5.8.8/build/Parse-Marpa-0.001_041' [MSG] [Mon Nov 19 18:44:50 2007] Checking if your kit is complete... Looks good Writing Makefile for Parse::Marpa [MSG] [Mon Nov 19 18:44:50 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Mon Nov 19 18:44:54 2007] cp lib/Parse/Marpa/ALGORITHM.pod blib/lib/Parse/Marpa/ALGORITHM.pod cp lib/Parse/Marpa.pm blib/lib/Parse/Marpa.pm cp lib/Parse/Marpa/WHY_CALL_IT_MARPA.pod blib/lib/Parse/Marpa/WHY_CALL_IT_MARPA.pod Manifying blib/man3/Parse::Marpa::ALGORITHM.3 Manifying blib/man3/Parse::Marpa.3 Manifying blib/man3/Parse::Marpa::WHY_CALL_IT_MARPA.3 [ERROR] [Mon Nov 19 18:45:05 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load........# Testing Parse::Marpa 0.001041, Perl 5.008008, /home/chris/perl588/bin/perl ok t/ah.............ok t/ah2............ # Failed test 'Aycock/Horspool Parse Status at 0' # at t/ah2.t line 351. # got: 'Current Earley Set: 1; Furthest: 0 # Earley Set 0 # 0:St10,0 # 0:St3,0 # Earley Set 1 # 1:St7,0 # token choice 0 [p=0:St3,0; t=a] # ' # expected: 'Current Earley Set: 1; Furthest: 1 # Earley Set 0 # 0:St10,0 # 0:St3,0 # Earley Set 1 # 1:St7,0 # token choice 0 [p=0:St3,0; t=a] # ' # Failed test 'Aycock/Horspool Parse Status at 1' # at t/ah2.t line 357. # got: 'Current Earley Set: 2; Furthest: 0 # Earley Set 0 # 0:St10,0 # 0:St3,0 # Earley Set 1 # 1:St7,0 # token choice 0 [p=0:St3,0; t=a] # 1:St12,0 # link choice 0 [p=0:St3,0; c=1:St7,0] # 1:St1,1 # 1:St11,0 # link choice 0 [p=0:St10,0; c=1:St12,0] [p=0:St10,0; c=1:St14,0] # 1:St14,0 # link choice 0 [p=0:St3,0; c=1:St12,0] [p=0:St3,0; c=1:St6,0] # 1:St6,0 # link choice 0 [p=0:St3,0; c=1:St12,0] # Earley Set 2 # 2:St7,1 # token choice 0 [p=1:St1,1; t=a] # ' # expected: 'Current Earley Set: 2; Furthest: 2 # Earley Set 0 # 0:St10,0 # 0:St3,0 # Earley Set 1 # 1:St7,0 # token choice 0 [p=0:St3,0; t=a] # 1:St12,0 # link choice 0 [p=0:St3,0; c=1:St7,0] # 1:St1,1 # 1:St11,0 # link choice 0 [p=0:St10,0; c=1:St12,0] [p=0:St10,0; c=1:St14,0] # 1:St14,0 # link choice 0 [p=0:St3,0; c=1:St12,0] [p=0:St3,0; c=1:St6,0] # 1:St6,0 # link choice 0 [p=0:St3,0; c=1:St12,0] # Earley Set 2 # 2:St7,1 # token choice 0 [p=1:St1,1; t=a] # ' # Failed test 'Aycock/Horspool Parse Status at 2' # at t/ah2.t line 363. # got: 'Current Earley Set: 3; Furthest: 0 # Earley Set 0 # 0:St10,0 # 0:St3,0 # Earley Set 1 # 1:St7,0 # token choice 0 [p=0:St3,0; t=a] # 1:St12,0 # link choice 0 [p=0:St3,0; c=1:St7,0] # 1:St1,1 # 1:St11,0 # link choice 0 [p=0:St10,0; c=1:St12,0] [p=0:St10,0; c=1:St14,0] # 1:St14,0 # link choice 0 [p=0:St3,0; c=1:St12,0] [p=0:St3,0; c=1:St6,0] # 1:St6,0 # link choice 0 [p=0:St3,0; c=1:St12,0] # Earley Set 2 # 2:St7,1 # token choice 0 [p=1:St1,1; t=a] # 2:St9,0 # link choice 0 [p=1:St12,0; c=2:St7,1] # 2:St4,1 # link choice 0 [p=1:St1,1; c=2:St7,1] # 2:St2,2 # 2:St6,0 # link choice 0 [p=0:St3,0; c=2:St9,0] # 2:St13,0 # link choice 0 [p=1:St12,0; c=2:St4,1] [p=1:St12,0; c=2:St6,1] # 2:St5,0 # link choice 0 [p=1:St12,0; c=2:St4,1] # 2:St6,1 # link choice 0 [p=1:St1,1; c=2:St4,1] # 2:St14,0 # link choice 0 [p=0:St3,0; c=2:St6,0] [p=0:St3,0; c=2:St5,0] # 2:St11,0 # link choice 0 [p=0:St10,0; c=2:St13,0] [p=0:St10,0; c=2:St14,0] # Earley Set 3 # 3:St7,2 # token choice 0 [p=2:St2,2; t=a] # ' # expected: 'Current Earley Set: 3; Furthest: 3 # Earley Set 0 # 0:St10,0 # 0:St3,0 # Earley Set 1 # 1:St7,0 # token choice 0 [p=0:St3,0; t=a] # 1:St12,0 # link choice 0 [p=0:St3,0; c=1:St7,0] # 1:St1,1 # 1:St11,0 # link choice 0 [p=0:St10,0; c=1:St12,0] [p=0:St10,0; c=1:St14,0] # 1:St14,0 # link choice 0 [p=0:St3,0; c=1:St12,0] [p=0:St3,0; c=1:St6,0] # 1:St6,0 # link choice 0 [p=0:St3,0; c=1:St12,0] # Earley Set 2 # 2:St7,1 # token choice 0 [p=1:St1,1; t=a] # 2:St9,0 # link choice 0 [p=1:St12,0; c=2:St7,1] # 2:St4,1 # link choice 0 [p=1:St1,1; c=2:St7,1] # 2:St2,2 # 2:St6,0 # link choice 0 [p=0:St3,0; c=2:St9,0] # 2:St13,0 # link choice 0 [p=1:St12,0; c=2:St4,1] [p=1:St12,0; c=2:St6,1] # 2:St5,0 # link choice 0 [p=1:St12,0; c=2:St4,1] # 2:St6,1 # link choice 0 [p=1:St1,1; c=2:St4,1] # 2:St14,0 # link choice 0 [p=0:St3,0; c=2:St6,0] [p=0:St3,0; c=2:St5,0] # 2:St11,0 # link choice 0 [p=0:St10,0; c=2:St13,0] [p=0:St10,0; c=2:St14,0] # Earley Set 3 # 3:St7,2 # token choice 0 [p=2:St2,2; t=a] # ' # Looks like you failed 3 tests of 16. Dubious, test returned 3 (wstat 768, 0x300) Failed 3/16 subtests t/equation.......ok t/gj.............ok t/hu.............ok t/lex_minus......ok t/minus..........ok t/pascal.........ok t/wall...........ok t/weaken.........skipped: Test::Weaken 0.002002 required for testing of memory cycles Test Summary Report ------------------- t/ah2.t (Wstat: 768 Tests: 16 Failed: 3) Failed test number(s): 11-13 Non-zero exit status: 3 Files=11, Tests=99, 10 wallclock secs ( 0.01 usr 0.92 sys + 4.73 cusr 3.87 csys = 9.53 CPU) Result: FAIL Failed 1/11 test programs. 3/99 subtests failed. *** Error code 255 Stop in /home/chris/.cpanplus/5.8.8/build/Parse-Marpa-0.001_041 (line 775 of Makefile). [MSG] [Mon Nov 19 18:45:06 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.72 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:. PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Parse-Marpa-0.001_041/blib/lib:/home/chris/.cpanplus/5.8.8/build/Parse-Marpa-0.001_041/blib/arch:/home/chris/.cpanplus/5.8.8/build/Parse-Marpa-0.001_041/blib PERL5_CPANPLUS_IS_RUNNING = 9532 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/chris/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 0 10 EGID: $) = 10 0 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
