Hi Tom,
I took a look at this and found it is a bug with cpanplus. I'll submit
a bug to those folks and re-run your module.
Thanks!
-Mark
Tom Scanlan wrote:
>
> Thanks for the testing, Mark, but I'm not getting the same problem that
> you are. Just to check, I downloaded the module in question from CPAN.
> This is the complete Makefile.PL:
>
> --------- clip --------------------------
> use ExtUtils::MakeMaker;
> # See lib/ExtUtils/MakeMaker.pm for details of how to influence
> # the contents of the Makefile that is written.
> WriteMakefile(
> 'NAME' => 'NetworkInfo::Discovery',
> 'VERSION_FROM' => 'lib/NetworkInfo/Discovery.pm',
> 'PREREQ_PM' => {
> 'Net::Pcap' => 0.04,
> 'NetPacket' => 0.03,
> 'Net::Traceroute' => 1.05,
> }, # e.g., Module::Name => 1.1
> ($] >= 5.005 ? ## Add these new keywords supported since 5.005
> (ABSTRACT_FROM => 'lib/NetworkInfo/Discovery.pm',
> AUTHOR => 'Tom Scanlan <[EMAIL PROTECTED]>') : ()),
> );
> --------- end clip --------------------------
>
> I have tested before without Net::Pcap and had a failure during the "perl
> Makefile.PL". Is it possible that you missed this failure and went on
> with the make? In any case, I have a PREREQ_PM that is equivilent to
> yours. Is there something obviously wrong with my Makefile.PL listed
> above?
>
> -Tom Scanlan
>
> On Sat, 15 Mar 2003, Mark Reynolds wrote:
>
> > This distribution has been tested as part of the cpan-testers
> > effort to test as many new uploads to CPAN as possible. See
> > http://testers.cpan.org/
> >
> > Please cc any replies to [EMAIL PROTECTED] to keep other
> > test volunteers informed and to prevent any duplicate effort.
> >
> > --
> > This is an error report generated automatically by CPANPLUS,
> > version 0.042.
> >
> > Below is the error stack during 'make test':
> >
> > PERL_DL_NONLAZY=1 /usr/freeware/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
> > 1..1
> > Can't locate Net/Pcap.pm in @INC (@INC contains: ./lib/ blib/lib blib/arch
> > /usr/people/reynolds/.cpanplus/5.6.1/build/NetworkInfo-Discovery-0.11/blib/lib
> > /usr/people/reynolds/.cpanplus/5.6.1/build/NetworkInfo-Discovery-0.11/blib/arch
> > /usr/people/reynolds/.cpanplus/5.6.1/build/Net-Traceroute-1.07/blib/lib
> > /usr/people/reynolds/.cpanplus/5.6.1/build/Net-Traceroute-1.07/blib/arch
> > /usr/freeware/lib/perl5/5.6.1/irix-n32 /usr/freeware/lib/perl5/5.6.1
> > /usr/local/lib/perl5/site_perl/5.6.1/irix-n32 /usr/local/lib/perl5/site_perl/5.6.1
> > /usr/local/lib/perl5/site_perl /usr/freeware/lib/perl5/sgi_perl/5.6.1/irix-n32
> > /usr/freeware/lib/perl5/sgi_perl/5.6.1 /usr/freeware/lib/perl5/sgi_perl .) at
> > lib//NetworkInfo/Discovery/Sniff.pm line 10.
> > BEGIN failed--compilation aborted at lib//NetworkInfo/Discovery/Sniff.pm line 10.
> > Compilation failed in require at test.pl line 10.
> > BEGIN failed--compilation aborted at test.pl line 10.
> > *** Error code 2 (bu21)
> >
> >
> > Additional comments:
> >
> > Hello, Tom Scanlan! Thanks for uploading your works to CPAN.
> >
> > I noticed that the test suite seem to fail without these modules:
> >
> > Net::Pcap
> >
> > As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
> > Makefile.PL should solve this problem. For example:
> >
> > WriteMakefile(
> > AUTHOR => 'Tom Scanlan ([EMAIL PROTECTED])',
> > ... # other information
> > PREREQ_PM => {
> > 'Net::Pcap' => '0', # or a minimum workable version
> > }
> > );
> >
> > If you are interested in making a more flexible Makefile.PL that can
> > probe for missing dependencies and install them, ExtUtils::AutoInstall
> > at <http://search.cpan.org/search?dist=ExtUtils-AutoInstall> may be
> > worth a look.
> >
> > Thanks! :-)
> >
> > ******************************** NOTE ********************************
> > The comments above are created mechanically, possibly without manual
> > checking by the sender. Also, because many people perform automatic
> > tests on CPAN, chances are that you will receive identical messages
> > about the same problem.
> >
> > If you believe that the message is mistaken, please reply to the first
> > one with correction and/or additional information, and do not take
> > it personally. We appreciate your patience. :)
> > **********************************************************************
> >
> >
> > --
> >
> > Summary of my perl5 (revision 5.0 version 6 subversion 1) configuration:
> > Platform:
> > osname=irix, osvers=6.5, archname=irix-n32
> > uname='irix bitbucket 6.5 09180824 ip27 '
> > config_args='-der -Dcc="cc -n32 -mips3"
> > -Dlibpath=/usr/freeware/lib32:/usr/lib32
> > -Dincpath=/usr/freeware/include/db3:/usr/freeware/include:/usr/include
> > -Duseshrplib -Dprefix=/usr/freeware -Duse64bitint -Dlibs=-lm
> > -Dsiteprefix=/usr/local -Dvendorprefix=/usr/freeware -Darchname=irix-n32'
> > hint=recommended, useposix=true, d_sigaction=define
> > usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
> > useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
> > use64bitint=define use64bitall=undef uselongdouble=undef
> > Compiler:
> > cc='cc -n32 -mips3', ccflags ='-D_BSD_TYPES -D_BSD_TIME -woff
> > 1009,1110,1174,1184,1552 -OPT:Olimit=0:space=ON -I/usr/freeware/include
> > -I/usr/include',
> > optimize='-O3',
> > cppflags='-D_BSD_TYPES -D_BSD_TIME -OPT:Olimit=0:space=ON
> > -I/usr/freeware/include -I/usr/include'
> > ccversion='', gccversion='', gccosandvers=''
> > intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
> > d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
> > ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
> > lseeksize=8
> > alignbytes=8, usemymalloc=n, prototype=define
> > Linker and Libraries:
> > ld='cc -n32 -mips3', ldflags =' -L/usr/freeware/lib32 -L/usr/lib32
> > -Wl,-woff,84'
> > libpth=/usr/freeware/lib32 /usr/lib32 /lib32 /lib /usr/lib /usr/lib32
> > libs=-lm
> > perllibs=-lm
> > libc=/usr/lib32/libc.so, so=so, useshrplib=true, libperl=libperl.so
> > Dynamic Linking:
> > dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -n32
> > -Wl,-rpath,/usr/freeware/lib/perl5/5.6.1/irix-n32/CORE:/usr/freeware/lib32'
> > cccdlflags=' ', lddlflags='-n32 -shared -L/usr/freeware/lib32 -L/usr/lib32'
> >
--
***********************************************************************
Mark Reynolds (770)631-2250
SGI Computer Systems Toll free (800)800-4SGI
Technical Support Engineer VNet 6-828-2250
Customer Support Center - Atlanta [EMAIL PROTECTED]
>>>> Check your cases on-line at http://support.sgi.com/ <<<<
***********************************************************************
