This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear DROLSKY, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_08. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Nov 21 20:33:20 2007] Trying to get 'http://www.cpan.org/authors/id/D/DR/DROLSKY/MooseX-StrictConstructor-0.01.tar.gz' [MSG] [Wed Nov 21 20:33:22 2007] Trying to get 'http://www.cpan.org/authors/id/D/DR/DROLSKY/CHECKSUMS' [MSG] [Wed Nov 21 20:33:24 2007] Checksum matches for 'MooseX-StrictConstructor-0.01.tar.gz' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/t/' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/t/pod.t' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/t/perlcritic.t' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/t/basic.t' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/t/pod-coverage.t' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/META.yml' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/Changes' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/README' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/MANIFEST' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/Makefile.PL' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/lib/' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/lib/MooseX/' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/lib/MooseX/StrictConstructor.pm' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/lib/MooseX/Object/' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/lib/MooseX/Object/StrictConstructor.pm' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/SIGNATURE' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX-StrictConstructor-0.01/Build.PL' [MSG] [Wed Nov 21 20:33:24 2007] Extracted 'MooseX::StrictConstructor' to '/home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01' [MSG] [Wed Nov 21 20:33:26 2007] # running Build.PL /home/cpan/perl588/bin/perl Build.PL Checking whether your kit is complete... Looks good Checking prerequisites... Looks good Creating new 'Build' script for 'MooseX-StrictConstructor' version '0.01' [MSG] [Wed Nov 21 20:33:26 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Wed Nov 21 20:33:27 2007] /home/cpan/perl588/bin/perl Build --makefile_env_macros 1 Copying lib/MooseX/StrictConstructor.pm -> blib/lib/MooseX/StrictConstructor.pm Copying lib/MooseX/Object/StrictConstructor.pm -> blib/lib/MooseX/Object/StrictConstructor.pm Manifying blib/lib/MooseX/StrictConstructor.pm -> blib/libdoc/MooseX::StrictConstructor.3 Manifying blib/lib/MooseX/Object/StrictConstructor.pm -> blib/libdoc/MooseX::Object::StrictConstructor.3 [ERROR] [Wed Nov 21 20:33:30 2007] MAKE TEST failed: /home/cpan/perl588/bin/perl Build --makefile_env_macros 1 test t/basic.............Can't locate Moose.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01/blib /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/basic.t line 10. BEGIN failed--compilation aborted at t/basic.t line 10. # Looks like your test died before it could output anything. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 6/6 subtests t/perlcritic........skipped: This test is only run for the module author t/pod-coverage......skipped: This test is only run for the module author t/pod...............skipped: This test is only run for the module author Test Summary Report ------------------- t/basic.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 6 tests but ran 0. Files=4, Tests=0, 1 wallclock secs ( 0.05 usr 0.18 sys + 0.25 cusr 0.46 csys = 0.94 CPU) Result: NOTESTS Failed 1/4 test programs. 0/0 subtests failed. *** Error code 255 Stop. make: stopped in /home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01 [MSG] [Wed Nov 21 20:33:30 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Moose As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'DROLSKY ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Moose' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.62 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/MooseX-StrictConstructor-0.01/blib PERL5_CPANPLUS_IS_RUNNING = 7825 PERL5_CPANPLUS_IS_VERSION = 0.83_08 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/ksh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /home/cpan/perl588/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 100 100 EGID: $) = 100 100 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=netbsd, osvers=4.0_rc3, archname=i386-netbsd-thread-multi-64int uname='netbsd diafol.bingosnet.co.uk 4.0_rc3 netbsd 4.0_rc3 (generic) #0: tue oct 16 01:14:06 pdt 2007 [EMAIL PROTECTED]:homebuildsabnetbsd-4-0-rc3i386200710160011z-objhomebuildsabnetbsd-4-0-rc3srcsysarchi386compilegeneric i386 ' config_args='-de -Dprefix=/home/cpan/perl588 -Dusethreads -Duse64bitint -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=y, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include', optimize='-O', cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include' ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib' libpth=/usr/pkg/lib /lib /usr/lib libs=-lm -lcrypt -lutil -lc -lposix -lpthread perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E ' cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
