This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Peter Karman, This is a computer-generated report for SWISH-Prog-0.08 on perl-5.6.2, created automatically by CPAN-Reporter-1.06 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. While attempting to build or test this distribution, the distribution signaled that support is not available either for this operating system or this version of Perl. Nevertheless, any diagnostic output produced is provided below for reference. Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /usr/local/perl-5.6.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/1................. # Failed test 'use SWISH::Prog;' # at t/1.t line 2. # Tried to use 'SWISH::Prog'. # Error: Perl v5.8.3 required--this is only v5.6.2, stopped at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog.pm line 3. # BEGIN failed--compilation aborted at t/1.t line 2. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Can't locate object method "new" via package "SWISH::Prog" (perhaps you forgot to load "SWISH::Prog"?) at t/1.t line 4. # Looks like you planned 2 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 2/2 subtests t/2.................Perl v5.8.3 required--this is only v5.6.2, stopped at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog.pm line 3. Compilation failed in require at (eval 1) line 3. ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91. BEGIN failed--compilation aborted at t/2.t line 2. Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run t/3merge............Can't locate Search/Tools/XML.pm in @INC (@INC contains: /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/arch /usr/local/perl-5.6.2/lib/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/5.6.2 /usr/local/perl-5.6.2/lib/site_perl/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/site_perl/5.6.2 /usr/local/perl-5.6.2/lib/site_perl .) at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Config.pm line 62. BEGIN failed--compilation aborted at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Config.pm line 62. Compilation failed in require at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Index.pm line 9. BEGIN failed--compilation aborted at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Index.pm line 9. Compilation failed in require at t/3merge.t line 2. BEGIN failed--compilation aborted at t/3merge.t line 2. Dubious, test returned 2 (wstat 512, 0x200) Failed 3/3 subtests t/4add..............Perl v5.8.3 required--this is only v5.6.2, stopped at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog.pm line 3. BEGIN failed--compilation aborted at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog.pm line 3. Compilation failed in require at t/4add.t line 2. BEGIN failed--compilation aborted at t/4add.t line 2. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 3/3 subtests t/5object...........Can't locate Search/Tools/XML.pm in @INC (@INC contains: /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/arch /usr/local/perl-5.6.2/lib/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/5.6.2 /usr/local/perl-5.6.2/lib/site_perl/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/site_perl/5.6.2 /usr/local/perl-5.6.2/lib/site_perl .) at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Object.pm line 12. BEGIN failed--compilation aborted at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Object.pm line 12. Compilation failed in require at t/5object.t line 6. BEGIN failed--compilation aborted at t/5object.t line 6. Dubious, test returned 2 (wstat 512, 0x200) Failed 13/13 subtests t/config............Can't locate Search/Tools/XML.pm in @INC (@INC contains: /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/arch /usr/local/perl-5.6.2/lib/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/5.6.2 /usr/local/perl-5.6.2/lib/site_perl/5.6.2/i686-linux-64int /usr/local/perl-5.6.2/lib/site_perl/5.6.2 /usr/local/perl-5.6.2/lib/site_perl .) at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Config.pm line 62. BEGIN failed--compilation aborted at /home/sand/.cpan/build/SWISH-Prog-0.08-sn0h_I/blib/lib/SWISH/Prog/Config.pm line 62. Compilation failed in require at t/config.t line 3. BEGIN failed--compilation aborted at t/config.t line 3. Dubious, test returned 2 (wstat 512, 0x200) Failed 4/4 subtests t/pod-coverage......ok t/pod...............ok Test Summary Report ------------------- t/1.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 2 tests but ran 1. t/2.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output t/3merge.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 3 tests but ran 0. t/4add.t (Wstat: 65280 Tests: 0 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 3 tests but ran 0. t/5object.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 13 tests but ran 0. t/config.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 4 tests but ran 0. Files=8, Tests=24, 9 wallclock secs ( 0.06 usr 0.02 sys + 1.65 cusr 0.11 csys = 1.84 CPU) Result: FAIL Failed 6/8 test programs. 1/24 subtests failed. make: *** [test_dynamic] Fehler 11 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: requires: Module Need Have --------------------- ---- ------- Class::Accessor::Fast 0.01 0.31 Config::General 2.31 2.34 Data::Dump 0.01 1.08 File::Basename 0.01 2.6 File::Copy 0.01 2.03 File::Slurp 0 9999.12 File::Temp 0.01 0.19 MIME::Types 0.01 1.22 ! Search::Tools 0.16 n/a SWISH::Filter 0.07 0.09 YAML::Syck 0.72 0.85 ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 5259 PERL5_CPAN_IS_RUNNING = 5259 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /usr/local/perl-5.6.2/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------- CPAN 1.9205 Cwd 3.25_01 ExtUtils::CBuilder 0.19 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.36 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.25_01 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.03 Test::More 0.72 YAML n/a YAML::Syck 0.85 version 0.73 -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=linux, osvers=2.6.16-2-k7, archname=i686-linux-64int uname='linux k75 2.6.16-2-k7 #2 mon may 22 23:23:54 utc 2006 i686 gnulinux ' config_args='-Dprefix=/usr/local/perl-5.6.2 -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -es -Duse64bitint -Dusedevel -des' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.4 20060507 (prerelease) (Debian 4.0.3-3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, usemymalloc=n, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
