This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear H.Merijn Brand, This is a computer-generated report for VCS-SCCS-0.02 on perl-5.8.6, created automatically by CPAN-Reporter-1.06 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make test': PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_pod.......ok t/01_pod.......Backslash found where operator expected at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 139, near "]\" (Missing operator before \?) Operator or semicolon missing before %W at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 242. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 242. Operator or semicolon missing before %Z at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 243. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 243. Operator or semicolon missing before %Z at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 244. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 244. Operator or semicolon missing before %M at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 245. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 245. Operator or semicolon missing before %M at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 246. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 246. Operator or semicolon missing before %M at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 247. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 247. Operator or semicolon missing before %I at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 248. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 248. Operator or semicolon missing before %G at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 249. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 249. Operator or semicolon missing before %E at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 250. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 250. Operator or semicolon missing before %U at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 251. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 251. ok t/10_base......Backslash found where operator expected at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 139, near "]\" (Missing operator before \?) Operator or semicolon missing before %W at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 242. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 242. Operator or semicolon missing before %Z at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 243. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 243. Operator or semicolon missing before %Z at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 244. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 244. Operator or semicolon missing before %M at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 245. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 245. Operator or semicolon missing before %M at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 246. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 246. Operator or semicolon missing before %M at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 247. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 247. Operator or semicolon missing before %I at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 248. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 248. Operator or semicolon missing before %G at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 249. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 249. Operator or semicolon missing before %E at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 250. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 250. Operator or semicolon missing before %U at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 251. Ambiguous use of % resolved as operator % at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 251. # Failed test 'use VCS::SCCS;' # at t/10_base.t line 9. # Tried to use 'VCS::SCCS'. # Error: Substitution pattern not terminated at /home/sand/.cpan/build/VCS-SCCS-0.02-0LW_k0/blib/lib/VCS/SCCS.pm line 368. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at t/10_base.t line 9. Can't locate object method "version" via package "VCS::SCCS" at t/10_base.t line 12. # Looks like you planned 13 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 13/13 subtests Test Summary Report ------------------- t/10_base.t (Wstat: 65280 Tests: 1 Failed: 1) Failed test number(s): 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 13 tests but ran 1. Files=3, Tests=3, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.55 cusr 0.05 csys = 0.66 CPU) Result: FAIL Failed 1/3 test programs. 1/3 subtests failed. make: *** [test_dynamic] Fehler 255 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = de_DE.UTF-8 PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin PERL5LIB = PERL5_CPANPLUS_IS_RUNNING = 6670 PERL5_CPAN_IS_RUNNING = 6670 PERL_MM_USE_DEFAULT = 1 SHELL = /usr/bin/zsh TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED]/bin/perl $UID/$EUID = 1005 / 1005 $GID = 1005 1005 $EGID = 1005 1005 Perl module toolchain versions installed: Module Have ------------------- ------ CPAN 1.9205 Cwd 3.25 ExtUtils::CBuilder 0.21 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.38 ExtUtils::Manifest 1.51 ExtUtils::ParseXS 2.18 File::Spec 3.25 Module::Build 0.2808 Module::Signature 0.55 Test::Harness 3.03 Test::More 0.72 YAML 0.66 YAML::Syck 0.99 version 0.74 -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-thread-multi-64int uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686 gnulinux ' config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pes4ltZ/[EMAIL PROTECTED] -Dinstallusrbinperl=n -Uversiononly -des -Dusethreads -Duse64bitint -Dusedevel -Doptimize=-g -Dnoextensions=Encode' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
