The problem is simple: Text::BibTeX does not work correctly with MakeMaker to provide the dependency.
On Tue, 2003-06-17 at 20:18, Jeroen Latour wrote: > This distribution has been tested as part of the cpan-testers > effort to test as many new uploads to CPAN as possible. See > http://testers.cpan.org/ > > Please cc any replies to [EMAIL PROTECTED] to keep other > test volunteers informed and to prevent any duplicate effort. > > -- > This is an error report generated automatically by CPANPLUS, > version 0.042. > > Below is the error stack during 'make test': > > PERL_DL_NONLAZY=1 /home/local/bin/perl5.8.0 "-MExtUtils::Command::MM" "-e" > "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t > t/basicIO......ok > t/bibtex.......Can't locate Text/BibTeX.pm in @INC (@INC contains: > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/lib > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/arch > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/lib > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/arch > /home/spool/cpanplus/5.8.0/build/XML-XPath-1.13/blib/lib > /home/spool/cpanplus/5.8.0/build/XML-XPath-1.13/blib/arch > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/lib > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/arch > /home/spool/cpanplus/5.8.0/build/XML-DT-0.24.1/blib/lib > /home/spool/cpanplus/5.8.0/build/XML-DT-0.24.1/blib/arch > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/lib > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/arch > /usr/local/lib/perl5/5.8.0/i586-linux /usr/local/lib/perl5/5.8.0/i586-linux > /usr/local/lib/perl5/5.8.0 /usr/local/lib/perl5/site_perl/5.8.0/i586-linux > /usr/local/lib/perl5/site_perl/5.8.! > 0/i586-linux /usr/local/lib/perl5/site_perl/5.8.0 > /usr/local/lib/perl5/site_perl/5.8.0/i586-linux /usr/local/lib/perl5/site_perl/5.8.0 > /usr/local/lib/perl5/site_perl . /usr/local/lib/perl5/5.8.0/i586-linux > /usr/local/lib/perl5/5.8.0 /usr/local/lib/perl5/site_perl/5.8.0/i586-linux > /usr/local/lib/perl5/site_perl/5.8.0 /usr/local/lib/perl5/site_perl .) at > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/lib/Library/Catalog/BibTeX.pm > line 2. > BEGIN failed--compilation aborted at > /home/spool/cpanplus/5.8.0/build/Library-Catalog-0.12/blib/lib/Library/Catalog/BibTeX.pm > line 2. > Compilation failed in require at t/bibtex.t line 3. > BEGIN failed--compilation aborted at t/bibtex.t line 3. > dubious > Test returned status 2 (wstat 512, 0x200) > t/news.........ok > t/relations....ok > t/XML..........ok > Failed Test Stat Wstat Total Fail Failed List of Failed > ----------------------------------------------------------------------------------------------------------------------------------- > t/bibtex.t 2 512 ?? ?? % ?? > Failed 1/5 test scripts, 80.00% okay. 0/61 subtests failed, 100.00% okay. > make: *** [test_dynamic] Error 29 > > > Additional comments: > > Hello, Alberto Manuel Brandao Simoes! Thanks for uploading your works to CPAN. > > I noticed that the test suite seem to fail without these modules: > > Text::BibTeX > > As such, adding the prerequisite module(s) to 'PREREQ_PM' in your > Makefile.PL should solve this problem. For example: > > WriteMakefile( > AUTHOR => 'Alberto Manuel Brandao Simoes ([EMAIL PROTECTED])', > ... # other information > PREREQ_PM => { > 'Text::BibTeX' => '0', # or a minimum workable version > } > ); > > If you are interested in making a more flexible Makefile.PL that can > probe for missing dependencies and install them, ExtUtils::AutoInstall > at <http://search.cpan.org/search?dist=ExtUtils-AutoInstall> may be > worth a look. > > Thanks! :-) > > ******************************** NOTE ******************************** > The comments above are created mechanically, possibly without manual > checking by the sender. Also, because many people perform automatic > tests on CPAN, chances are that you will receive identical messages > about the same problem. > > If you believe that the message is mistaken, please reply to the first > one with correction and/or additional information, and do not take > it personally. We appreciate your patience. :) > ********************************************************************** > > > -- > > Summary of my perl5 (revision 5.0 version 8 subversion 0) configuration: > Platform: > osname=linux, osvers=2.2.16c32_iii, archname=i586-linux > uname='linux www.arens.nl 2.2.16c32_iii #1 fri nov 9 21:54:54 pst 2001 i586 > unknown ' > config_args='-Uinstallusrbinperl -ds' > hint=recommended, useposix=true, d_sigaction=define > usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef > useperlio=define d_sfio=undef uselargefiles=define usesocks=undef > use64bitint=undef use64bitall=undef uselongdouble=undef > usemymalloc=n, bincompat5005=undef > Compiler: > cc='cc', ccflags ='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE > -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', > optimize='-O3', > cppflags='-fno-strict-aliasing -I/usr/local/include -I/usr/include/gdbm' > ccversion='', gccversion='2.95.3 20010315 (release)', gccosandvers='' > intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 > d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 > ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 > alignbytes=4, prototype=define > Linker and Libraries: > ld='cc', ldflags =' -L/usr/local/lib' > libpth=/usr/local/lib /lib /usr/lib > libs=-lnsl -lndbm -lgdbm -ldb -ldl -lm -lc -lposix -lcrypt -lutil > perllibs=-lnsl -ldl -lm -lc -lposix -lcrypt -lutil > libc=/lib/libc-2.1.3.so, so=so, useshrplib=false, libperl=libperl.a > gnulibc_version='2.1.3' > Dynamic Linking: > dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic' > cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
