This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear CHORNY, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Dec 1 13:40:01 2007] Trying to get 'http://www.cpan.org/authors/id/C/CH/CHORNY/CHECKSUMS' [MSG] [Sat Dec 1 13:40:02 2007] Checksum matches for 'Roman-1.21.tar.gz' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/Changes' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/lib/' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/lib/Roman.pm' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/Makefile.PL' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/MANIFEST' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/META.yml' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/README' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/t/' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/t/00-load.t' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/t/01.t' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/t/pod-coverage.t' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman-1.21/t/pod.t' [MSG] [Sat Dec 1 13:40:02 2007] Extracted 'Roman' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21' [MSG] [Sat Dec 1 13:40:03 2007] Checking if your kit is complete... Looks good Writing Makefile for Roman [MSG] [Sat Dec 1 13:40:03 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Dec 1 13:40:05 2007] cp lib/Roman.pm blib/lib/Roman.pm Manifying blib/man3/Roman.3 [ERROR] [Sat Dec 1 13:40:07 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load........."import" is not exported by the Exporter module at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib/Roman.pm line 102 # Failed test 'use Roman;' # at t/00-load.t line 6. # Tried to use 'Roman'. # Error: Can't continue after import errors at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib/Roman.pm line 102 # BEGIN failed--compilation aborted at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib/Roman.pm line 102. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9. # Testing Roman , Perl 5.006002, /Volumes/Media/smoke/perl562/bin/perl # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/01.............."import" is not exported by the Exporter module at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib/Roman.pm line 102 # Failed test 'use Roman;' # at t/01.t line 16. # Tried to use 'Roman'. # Error: Can't continue after import errors at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib/Roman.pm line 102 # BEGIN failed--compilation aborted at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib/Roman.pm line 102. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Undefined subroutine &main::isroman called at t/01.t line 19. # Looks like you planned 34 tests but only ran 1. # Looks like you failed 1 test of 1 run. # Looks like your test died just after 1. dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-34 Failed 34/34 tests, 0.00% okay t/pod-coverage....skipped all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage t/pod.............skipped all skipped: Test::Pod 1.14 required for testing POD Failed Test Stat Wstat Total Fail List of Failed ------------------------------------------------------------------------------- t/00-load.t 1 256 1 1 1 t/01.t 255 65280 34 67 1-34 2 tests skipped. Failed 2/4 test scripts. 35/35 subtests failed. Files=4, Tests=35, 1 wallclock secs ( 0.52 cusr + 0.14 csys = 0.66 CPU) Failed 2/4 test programs. 35/35 subtests failed. [MSG] [Sat Dec 1 13:40:07 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.71 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 3.07e-02. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Roman-1.21/blib PERL5_CPANPLUS_IS_EXECUTING = PERL5_CPANPLUS_IS_RUNNING = 453 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi uname='darwin bingos-power-mac-g4-agp-graphics.local 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include', optimize='-O3', cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, usemymalloc=n, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
