This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GRAHAMC, This is a computer-generated error report created automatically by CPANPLUS, version 0.82. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 6 13:04:15 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Thu Dec 6 13:04:19 2007] Trying to get 'http://www.cpan.org/authors/id/G/GR/GRAHAMC/CHECKSUMS' [MSG] [Thu Dec 6 13:04:21 2007] Checksum matches for 'Geo-Coordinates-UTM-0.07.tar.gz' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/Changes' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/02_points.t' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/t/01_basic_settings.t' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/README' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/MANIFEST' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/Makefile.PL' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/UTM.pm' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo-Coordinates-UTM-0.07/META.yml' [MSG] [Thu Dec 6 13:04:22 2007] Extracted 'Geo::Coordinates::UTM' to '/export/home/chris/.cpanplus/5.8.7/build/Geo-Coordinates-UTM-0.07' [MSG] [Thu Dec 6 13:04:23 2007] Checking if your kit is complete... Looks good Writing Makefile for Geo::Coordinates::UTM [MSG] [Thu Dec 6 13:04:23 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 6 13:04:26 2007] cp UTM.pm blib/lib/Geo/Coordinates/UTM.pm Manifying blib/man3/Geo::Coordinates::UTM.3pm [ERROR] [Thu Dec 6 13:04:39 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/01_basic_settings......ok t/02_points.............. # Failed test 'fz longitude (zone 60J) 2' # at t/02_points.t line 16. # floating point value 1784763805.8408 too different to reference 176.847283481794 # Failed test 'fz latitude (zone 60J) 2' # at t/02_points.t line 16. # floating point value -26873996302.6418 too different to reference -25.9668774017417 # Failed test 'fz longitude (zone 60N) 86' # at t/02_points.t line 16. # floating point value -197803765303652 too different to reference 174.654184750992 # Failed test 'fz latitude (zone 60N) 86' # at t/02_points.t line 16. # floating point value 3.65289827839461e+16 too different to reference 0.173063552093197 # Failed test 'fz longitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value 29696459666.1867 too different to reference 174.953950987426 # Failed test 'fz latitude (zone 60H) 223' # at t/02_points.t line 16. # floating point value -505880950687.311 too different to reference -32.7058399004368 # Failed test 'fz longitude (zone 1G) 293' # at t/02_points.t line 16. # floating point value 736772512133.678 too different to reference -179.11990259409 # Failed test 'fz latitude (zone 1G) 293' # at t/02_points.t line 16. # floating point value -56673505613367.3 too different to reference -44.7032654610135 # Failed test 'fz longitude (zone 60S) 332' # at t/02_points.t line 16. # floating point value -1.01694981918342e+15 too different to reference 176.956179976245 # Failed test 'fz latitude (zone 60S) 332' # at t/02_points.t line 16. # floating point value 2.72438220920375e+16 too different to reference 35.736632935535 # Failed test 'fz longitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value -127840346841118 too different to reference 174.81595471932 # Failed test 'fz latitude (zone 60N) 609' # at t/02_points.t line 16. # floating point value -2.40063985764057e+16 too different to reference 3.54293898179039 # Failed test 'fz longitude (zone 1C) 696' # at t/02_points.t line 16. # floating point value 160.24113893369 too different to reference -178.667252355676 # Failed test 'fz latitude (zone 1C) 696' # at t/02_points.t line 16. # floating point value 789.169939565407 too different to reference -79.9635778969601 # Failed test 'fz longitude (zone 59K) 721' # at t/02_points.t line 16. # floating point value -237649713233.003 too different to reference 170.41270562919 # Failed test 'fz latitude (zone 59K) 721' # at t/02_points.t line 16. # floating point value -13084428793140.3 too different to reference -22.6288991538721 # Failed test 'fz longitude (zone 1E) 775' # at t/02_points.t line 16. # floating point value 55855886447.1693 too different to reference -177.53261758132 # Failed test 'fz latitude (zone 1E) 775' # at t/02_points.t line 16. # floating point value 2520389222098.64 too different to reference -58.9746255467707 # Failed test 'fz longitude (zone 60R) 790' # at t/02_points.t line 16. # floating point value -58817867.2064715 too different to reference 179.525452314159 # Failed test 'fz latitude (zone 60R) 790' # at t/02_points.t line 16. # floating point value 711481355.194079 too different to reference 30.9984249356909 # Failed test 'fz longitude (zone 1Q) 938' # at t/02_points.t line 16. # floating point value -9.18596158497168e+15 too different to reference -175.62673930873 # Failed test 'fz latitude (zone 1Q) 938' # at t/02_points.t line 16. # floating point value 6.47784607887517e+17 too different to reference 17.724839026044 # Failed test 'fz longitude (zone 60R) 944' # at t/02_points.t line 16. # floating point value 1332850857.33011 too different to reference 178.022588263852 # Failed test 'fz latitude (zone 60R) 944' # at t/02_points.t line 16. # floating point value -17129468940.8606 too different to reference 27.5894439325656 # Failed test 'fz longitude (zone 60N) 955' # at t/02_points.t line 16. # floating point value 71778716665666.7 too different to reference 178.566129759528 # Failed test 'fz latitude (zone 60N) 955' # at t/02_points.t line 16. # floating point value -1.43526760578873e+16 too different to reference 0.7476776507023 # Looks like you failed 26 tests of 9991. Dubious, test returned 26 (wstat 6656, 0x1a00) Failed 26/9991 subtests Test Summary Report ------------------- t/02_points.t (Wstat: 6656 Tests: 9991 Failed: 26) Failed test number(s): 10-11, 850-851, 2220-2221, 2920-2921, 3310-3311 6080-6081, 6950-6951, 7200-7201, 7740-7741 7890-7891, 9370-9371, 9430-9431, 9540-9541 Non-zero exit status: 26 Files=2, Tests=9994, 12 wallclock secs ( 3.14 usr 0.27 sys + 5.81 cusr 0.41 csys = 9.63 CPU) Result: FAIL Failed 1/2 test programs. 26/9994 subtests failed. make: *** [test_dynamic] Error 29 [MSG] [Thu Dec 6 13:04:39 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/usr/bin/X11:/usr/games PERL5LIB = :/export/home/chris/.cpanplus/5.8.7/build/Geo-Coordinates-UTM-0.07/blib/lib:/export/home/chris/.cpanplus/5.8.7/build/Geo-Coordinates-UTM-0.07/blib/arch:/export/home/chris/.cpanplus/5.8.7/build/Geo-Coordinates-UTM-0.07/blib PERL5_CPANPLUS_IS_RUNNING = 890 PERL5_CPANPLUS_IS_VERSION = 0.82 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /usr/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 10 EGID: $) = 10 10 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=solaris, osvers=2.11, archname=i386-pc-solaris2.11-thread-multi uname='sunos kernelunix.org 5.11 elatte:os_20050909:2005-09-15 i86pc i386 i86pc solaris ' config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcc=gcc -Dldflags=-lm -Dlddlflags=-shared -Dccdlflags=-Wl,-E -Dcccdlflags=-fPIC -Darchname=i386-pc-solaris2.11 -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.7 -Dsitearch=/usr/local/lib/perl/5.8.7 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.7 -Dd_dosuid -des' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-D_REENTRANT -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3 20060113 (prerelease) (GNU_Solaris 4.0.2-6nexenta3)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags ='-lm -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lm -lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lrt -lnsl -lsocket perllibs=-lm -ldl -lm -lpthread -lc -lrt -lnsl -lsocket libc=, so=so, useshrplib=true, libperl=libperl.so.5.8.7 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -R /usr/lib/perl/5.8/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
