This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear ASPINDLER, This is a computer-generated error report created automatically by CPANPLUS, version 0.83_09. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Dec 6 23:32:14 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASPINDLER/Data-Rlist-1.35.tar.gz' [MSG] [Thu Dec 6 23:32:18 2007] Trying to get 'http://www.cpan.org/authors/id/A/AS/ASPINDLER/CHECKSUMS' [MSG] [Thu Dec 6 23:32:18 2007] Checksum matches for 'Data-Rlist-1.35.tar.gz' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/MANIFEST' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/lib/' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/lib/Data/' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/lib/Data/Rlist.pm' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/t/' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/t/Data-Rlist.t' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/Changes' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/README' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/Makefile.PL' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data-Rlist-1.35/META.yml' [MSG] [Thu Dec 6 23:32:19 2007] Extracted 'Data::Rlist' to '/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Data-Rlist-1.35' [MSG] [Thu Dec 6 23:32:21 2007] perl thinks the current OS is 'solaris' Checking if your kit is complete... Looks good Writing Makefile for Data::Rlist [MSG] [Thu Dec 6 23:32:22 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Thu Dec 6 23:32:26 2007] cp lib/Data/Rlist.pm blib/lib/Data/Rlist.pm Manifying blib/man3/Data::Rlist.3 [ERROR] [Thu Dec 6 23:32:27 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/Data-Rlist......# Failed test 20 in t/Data-Rlist.t at line 80 # t/Data-Rlist.t line 80 is: ok(defined $test1file); # Failed test 21 in t/Data-Rlist.t at line 81 # t/Data-Rlist.t line 81 is: ok(defined $test2file); Failed 2/30 subtests Test Summary Report ------------------- t/Data-Rlist.t (Wstat: 0 Tests: 30 Failed: 2) Failed test number(s): 20-21 Files=1, Tests=30, 1 wallclock secs ( 0.06 usr 0.04 sys + 0.21 cusr 0.07 csys = 0.38 CPU) Result: FAIL Failed 1/1 test programs. 2/30 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Thu Dec 6 23:32:27 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/usr/bin/X11:/usr/games PERL5LIB = :/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Data-Rlist-1.35/blib/lib:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Data-Rlist-1.35/blib/arch:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Data-Rlist-1.35/blib PERL5_CPANPLUS_IS_RUNNING = 24704 PERL5_CPANPLUS_IS_VERSION = 0.83_09 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /export/home/chris/perl5.10.0/bin/perl UID: $< = 1000 EUID: $> = 1000 GID: $( = 10 10 EGID: $) = 10 10 ------------------------------- -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=solaris, osvers=2.11, archname=i386-pc-solaris2.11-thread-multi-64int uname='sunos wobble 5.11 nexentaos_20070402 i86pc i386 i86pc solaris ' config_args='-e -Dprefix=/export/home/chris/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.0.3 (GNU_Solaris 4.0.3-1nexenta6)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='cc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -lgdbm -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-E' cccdlflags='-fPIC', lddlflags=' -Wl,-E -G -L/usr/local/lib'
